Redmi Buds 5 Pro User Manual

Product Overview

This manual provides information about the Redmi Buds 5 Pro wireless earphones. Please read it carefully before use and retain it for future reference.

Package Contents

The package typically includes the Redmi Buds 5 Pro earphones and a charging case.

Wearing and Charging

Instructions are provided on how to wear the earbuds correctly for both left (L) and right (R) ears, and how to place them in the charging case for charging.

Turning On and Sleep Mode

Information on how to turn the earbuds on and off, and how they enter sleep mode.

Connecting with App

To enhance functionality, users can download and install the Xiaomi Earbuds app by scanning a QR code. The app supports mobile phones with Android 6.0 and above, and iOS 14.0 and above. Ensure Bluetooth is enabled on your smartphone and the earbuds are in the charging box with the lid open and the smartphone nearby.

Dual-Device Connection

The earbuds support dual-device connection, which is off by default. This feature can be enabled via the Xiaomi Earbuds app.

Force Pairing

Instructions for force pairing the earbuds.

Use with Single Earbud

Information on using a single earbud.

Restoring Factory Settings

Instructions on how to restore the earbuds to their factory settings, typically involving a 10-second press.

Specifications

• Name: Wireless Earphones
• Model: M2317E1
• Charging Port: Type-C
• Earbuds Input: 5 V 160mA
• Charging Case Input: 5 V 700mA
• Charging Case Output: 5 V 320mA
• Wireless Connectivity: Bluetooth® 5.3
• Operating Temperature: 0°C to 45°C
• Supported Audio Codecs: SBC/AAC/LC3/LDAC
• Wireless Range: 10 m (open space without obstacles)
• Operation Frequency: 2400MHz to 2483.5MHz
• Maximum Transmit Power: <13 dBm (for EU)
• Compatible with: Supports certain Android or iOS systems. Check www.mi.com for details.

Note: Bluetooth signal characteristics may lead to occasional disconnects or no sound in dense environments with 2.4 GHz electromagnetic interference.

WEEE Information

This symbol indicates that the product is waste electrical and electronic equipment (WEEE) and should not be mixed with household waste. It must be handed over to a designated collection point for recycling. Proper disposal helps prevent negative environmental and health consequences.

EU Declaration of Conformity

Tiinlab Corporation declares that the radio equipment type M2317E1 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html

UKCA Declaration of Conformity

Tiinlab Corporation declares that the radio equipment type M2317E1 complies with Radio Equipment Regulations 2017. The full text of the UKCA declaration of conformity is available at: https://www.mi.com/uk/service/support/declaration.html

Warranty Notice

Xiaomi provides additional warranty benefits to consumers, which are in addition to, and not instead of, any legal warranties provided by national consumer law. For details, refer to Xiaomi's official website: https://www.mi.com/global/support/warranty. After-sales services are limited to the country or region of original purchase. Xiaomi will repair, replace, or refund the product at its discretion. Normal wear and tear, force majeure, abuse, or damage due to user negligence are not covered. Contact an authorized Xiaomi service provider or retailer for assistance.

Important Safety Information

• Read precautions before use to ensure optimal performance and avoid dangerous operations.
• Do not use earbuds while driving.
• Use only compliant power adapters.
• Do not disassemble, strike, crush, or incinerate the product, as it may cause an explosion.
• The built-in battery cannot be removed or replaced. Do not attempt to disassemble or modify it.
• Dispose of used batteries according to local laws and regulations.
• Avoid using the product during thunderstorms.
• Do not expose the battery to extreme temperatures or low air pressure, as this may cause explosion or leakage.
• Keep earbuds and accessories away from children as they may contain small parts.
• Stop use and seek medical attention if skin contact area shows redness or swelling.
• Noise canceling may affect awareness of surroundings; use in a safe environment.
• To prevent hearing loss, do not use at high volume for extended periods.
• The symbol indicates DC voltage.

FCC Compliance Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

ISED Compliance Statements

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

RF Exposure Compliance

This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. The transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 0 mm between the radiator and your Head. The portable device is designed to meet the requirements for exposure to radio waves established by the FCC/ISED.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi inc. is under license. Other trademarks and trade names are those of their respective owners.

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Tiinlab Corporation (a Mi Ecosystem company)

Address: No. 3333, Liuxian Avenue, Tower A, 35th Floor, Tanglang City, Nanshan District, Shenzhen, China

For further information, please go to www.mi.com

User Manual Version: V1.0