Bloody M70 True Wireless Gaming Earphones

WHAT'S IN THE BOX

The package includes:

• Earphones
• Charging Case
• Ear Sleeves (S/M/L)
• Charging Cable (Type-C)
• User Manual

HOW TO WEAR

1. Choose your appropriate sleeve. (Size M is on the earphone)
2. Insert the earphone into your ear canal.
3. Adjust for a comfortable and secure fit.

Visual description: A series of diagrams showing the steps to wear the earphones, including selecting ear sleeves and inserting them into the ear.

FIRST TIME USE

Place the earphones into the charging case and charge both devices until fully charged before the first use.

Visual description: An illustration showing earphones being placed into a charging case.

POWER ON & CONNECT

The earphones automatically enter pairing mode when taken out of the charging case.

On your device, go to Bluetooth settings and select "Bloody M70" to connect.

Note: Left and Right earphones can be used independently.

Visual description: An illustration showing earphones being removed from the charging case, and a smartphone screen displaying Bluetooth settings with "Bloody M70" selected.

RECONNECT & DISCONNECT

To reconnect: Take out the earphones, and they will automatically connect to the last paired device (ensure Bluetooth is enabled on your device).

To disconnect: Place the earphones back into the charging case and close the lid.

Visual description: An illustration showing earphones being placed into the charging case and the lid being closed.

CHARGING

Earphone Charging: Automatically charges when placed inside the charging case. The indicator light on the earphone will flash slowly while charging.

Charging Case: Connect a Type-C cable to charge the case.

Visual description: Diagrams illustrating earphones charging in the case and the charging case being connected via a Type-C cable.

LED INDICATORS

For RED LED Model:

• Flashing RED: Low Battery
• Flashing RED and BLUE: Pairing
• Solid RED: Charging
• Flashing RED Slowly: Working
• No Light: Fully Charged

For BLUE LED Model:

• Flashing BLUE: Low Battery
• Flashing RED and BLUE: Pairing
• Solid BLUE: Charging
• Flashing BLUE Slowly: Working
• No Light: Fully Charged

TECH SPEC

CLEANING AND MAINTENANCE

Keep your earphones and charging case clean and dry for optimal performance.

1. Keep the device dry and clean.
2. Remove earphone sleeves, soak in water, rinse well, and let them dry overnight.
3. Ensure sleeves are completely dry before reattaching.
4. Clean earphones and sleeves with gentle disinfectants.
5. Do not use alcohol-based disinfectants.
6. Replace sleeves if necessary.

SAFETY RULES

1. To prevent hearing damage, avoid using earphones at high volumes for extended periods.
2. Do not disassemble or modify the earphones, as this may cause malfunction and void the warranty.
3. Avoid exposing the device to liquids, as this can cause serious damage not covered by warranty.
4. Do not use the product in environments with extreme temperatures (above 45°C or below -20°C).
5. Do not point the device's light directly into eyes.
6. Not suitable for children under 3 years old.
7. Do not use the device during thunderstorms.

WARNING STATEMENT

The following actions may damage the product:

1. Disassembling, bumping, crushing, or throwing lithium batteries into fire is prohibited.
2. Do not expose the product to strong sunlight.
3. Dispose of batteries according to local laws; recycling is preferred. Do not discard as household garbage due to explosion risk.
4. Do not continue to use if severe swelling occurs.
5. Avoid charging in environments below 0°C.
6. Users are not permitted to remove or replace batteries unless specified in the user manual.

FCC Regulatory Conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF Exposure: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

FCC ID: 2AXWI-M70

Visual description: FCC logo.

CHARGE THE CHARGING CASE

Connect a Type-C cable to charge the charging case.

Visual description: An illustration showing a Type-C cable connected to the charging case.

CONTROL AT YOUR FINGERTIPS

Note: Double tap to hang up phone call or decline an incoming call.

Visual description: Diagrams illustrating touch controls on the left and right earphones.