Bloody GPW70 2.4G Wireless RGB Gaming Controller

What's in the Box

• Gaming Controller
• 2.4G USB Receiver
• USB Type-C Charging Cable
• User Manual

Know Your Product

The Bloody GPW70 features a comprehensive layout of controls and ports:

1. Home Button

Used for powering on/off and mode switching.

2. 3D Left Joystick / LSB

Primary left analog stick, also functions as a clickable button (L3).

3. Turbo Button

Used for setting turbo functions and adjusting vibration/turbo speed.

4. Clear Button

Used for clearing turbo settings.

5. Back Button

Standard back/select function.

6. Start Button

Standard start/menu function.

7. LED Button

Used for controlling RGB lighting effects.

8. LED Indicator

Displays connection status and mode.

9. D-Pad

Directional Pad for digital input.

10. 3D Right Joystick / RSB

Primary right analog stick, also functions as a clickable button (R3).

11. ABXY Button

Standard action buttons.

12. Left Macro Button (ML)

Programmable macro button on the left.

13. Right Macro Button (MR)

Programmable macro button on the right.

14. AUX 3.5mm Port

For connecting headsets or microphones.

15. Right Button (RB)

Shoulder button.

16. Left Button (LB)

Shoulder button.

17. Right Trigger (RT)

Analog trigger.

18. Left Trigger (LT)

Analog trigger.

19. USB Type-C Port

For charging and wired connection.

20. Reset Button

Used for powering off the controller.

Button Functions

The controller's buttons map to different functions across various platforms:

Wide Compatibility

The Bloody GPW70 supports multiple platforms. Note: You can only connect in one mode at a time.

Connecting 2.4G Device

Power On:

1. Plug the 2.4G USB Receiver into your device (PC, Android, PS3, Switch).
2. Press the Home Button to turn on the controller. The LED indicators will light up.

Power Off:

1. Long press the Reset Button for 3 seconds to turn off the controller.

Note: The controller can be charged via the USB Type-C port if the battery is low during gameplay.

Connecting Wired Device

1. Plug the USB Type-C cable into the controller and your computer.
2. Press the Home Button to enter Wired Mode. If the cable is plugged in without pressing Home, it will enter charging mode.
3. The LED indicator lights up once the controller is connected.

Note: The controller prioritizes 2.4G mode. If both the cable and 2.4G Receiver are connected simultaneously, the wired function will only be for charging.

LED Indicator

Connect with PC Platform

PC/X-Input Mode

1. Plug the 2.4G Receiver into your PC.

2. Press the Home Button to turn on the controller. LED indicators will flash during pairing.

3. LED-2 lights up once the controller is connected.

Mode Exchange (PC/X-Input to PC/D-Input)

1. Long press the Home Button for 3 seconds to switch to PC/D-Input mode. LED-1 and LED-2 will light up.

2. Long press the Home Button for 3 seconds again to switch back to PC/X-Input mode. LED-2 will light up.

Connect with Android Platform

1. Plug the 2.4G Receiver into your Android device (Smart TV, Set-Top Box, Smartphone, Tablet running Android v5.0 or above).

2. Note: An OTG adapter may be required for smartphones and tablets (OTG adapter not included).

3. Press the Home Button to turn on the controller. LED indicators will flash during pairing.

4. LED-3 lights up once the controller is connected.

Change to Mouse Mode

To switch to Mouse Mode: Long press and hold the Start Button and the 3D Left Joystick Button simultaneously for 5 seconds. LED-3 and LED-4 will light up. Repeat the same steps to return to the default function.

Connect with Nintendo Switch

1. Ensure "Pro Controller Wired Communication" is enabled in your Switch console settings (System Settings > Controllers and Sensors > Pro Controller Wired Communication > On).

2. Note: This setting must be enabled before connecting the controller and dock with the USB receiver.

3. Plug the 2.4G Receiver into your Nintendo Switch console.

4. LED indicators will flash during pairing.

5. LED-1 lights up once the controller is connected.

Notes for Switch Platform:

• Sensor Function and Capture Button are not available.
• Button "A" and "B" are swapped.
• Button "X" and "Y" are swapped.
• Button "Back" functions as "-".
• Button "Start" functions as "+".

Audio Function

You can connect a headset or microphone to the AUX 3.5mm Audio Port for audio input/output.

Connect with PlayStation 3

1. Plug the 2.4G Receiver into your PS3 console.
2. Press the Home Button to turn on the controller. LED indicators will flash during pairing.
3. LED-1 lights up once the controller is connected.

3D Joystick and D-Pad Switching

You can swap the functionality of the D-Pad and the 3D Left Joystick. Press and hold the Start Button and the 3D Left Joystick Button simultaneously to exchange their functions. Repeat the same steps to revert to the default configuration.

Adjust Vibration Intensity

Increase Vibration Intensity: Long press and hold the Turbo Button, then slide the 3D Right Joystick upwards.

Decrease Vibration Intensity: Long press and hold the Turbo Button, then slide the 3D Right Joystick downwards.

Vibration levels can be adjusted to 100%, 70%, 30%, or Off.

Turbo & Clear Function Setting

Enable Turbo Setting

1. Press and hold one or more buttons (A/B/X/Y/LB/RB/LT/RT) you wish to assign turbo function to.
2. Then, press the Turbo Button to save the turbo function for the selected button(s).
3. You can set turbo for multiple buttons by repeating step 1 and 2 for each button combination.

Adjust Turbo Speed

1. Increase Turbo Speed: Long press and hold the Turbo Button, then slide the 3D Right Joystick to the right.
2. Decrease Turbo Speed: Long press and hold the Turbo Button, then slide the 3D Right Joystick to the left.

The controller supports 3-level turbo speeds.

Clear Turbo Setting

1. To clear a specific button's turbo function: Press and hold the button with the turbo function enabled, then press the Clear Button.
2. To clear all turbo settings, repeat this process for each button individually.

Customize ML/MR Macro Buttons

The ML (Left Macro) and MR (Right Macro) buttons can be programmed with custom sequences. Supported inputs include A/B/X/Y/LB/RB/LT/RT, D-Pad, 3D Joysticks, and Joystick Buttons.

Set the Macro Function

1. Press and hold the ML or MR Button for 5 seconds. LED-2 and LED-3 will flash slowly, indicating macro recording mode.
2. Press the sequence of function buttons and joystick movements you want to record.
3. Press the ML or MR Button again to save the macro recording.

Clear the Macro Setting

1. Press and hold the ML or MR Button for 5 seconds. LED-2 and LED-3 will flash slowly.
2. Press the ML or MR Button again to clear the saved macro setting for that button.

RGB Lighting Effect Setting

RGB Light On/Off

Press and hold the LED Button for 5 seconds to turn the RGB backlighting on or off.

Change Lighting Effect and Color

Lighting Effects: RGB Flowing, Solid, Breathing, Cycle.

Zone-1 Lighting Control:

• To change effects: Press and hold the LED Button, then press the D-Pad Up/Down buttons.
• To change colors: Press and hold the LED Button, then press the D-Pad Left/Right buttons.

Zone-2 Lighting Control:

• To change effects: Press and hold the LED Button, then press the Start Button.
• To change colors: Press and hold the LED Button, then press the Back Button.

Note: Light effect illustrations are for reference only; actual product appearance may vary.

Charging/Low Battery Indicator

• Charging: The USB Type-C port will show a flashing red light.
• Fully Charged: The USB Type-C port will show a solid red light.
• Charging Time: Approximately 2.5 hours.
• Low Battery: A flashing red light indicates the battery is below 10%.
• Playtime: Up to 13 hours (Vibration & Light Off), Up to 7 hours (Vibration & Light On).
• Sleep Mode: The controller enters sleep mode after 5 minutes of inactivity, indicated by the LED indicators turning off. Press the Home Button to wake it up.

Specifications

For more information, visit www.Bloody.com. Scan for E-Manual.