What's in the Box
- Gaming Controller
- 2.4G USB Receiver
- USB Type-C Charging Cable
- User Manual
Know Your Product
The gaming controller features the following components:
- 1. [Home Button]
- 2. [Back Button]
- 3. [Start Button]
- 4. [Turbo Button]
- 5. [Clear Button]
- 6. [LED Indicator]
- 7. [3D Left Joystick / LSB]
- 8. [D-Pad]
- 9. [3D Right Joystick / RSB]
- 10. [ABXY Button]
- 11. [Right Button (RB)]
- 12. [Left Button (LB)]
- 13. [Right Trigger (RT)]
- 14. [Left Trigger (LT)]
- 15. [USB Type-C Port]
Button Functions:
| Button | PC/X-Input | PC/D-Input | Android | PS3 |
|---|---|---|---|---|
| A | 1 | 3 | A | L1 |
| B | 2 | 2 | B | R1 |
| X | 3 | 4 | X | L2 |
| Y | 4 | 1 | Y | R2 |
| LB | 5 | 5 | L1 | Select |
| RB | 6 | 6 | R1 | Start |
| LT | Z Axis | 7 | L2 | L3 |
| RT | Z Axis | 8 | R2 | R3 |
| Back | 7 | 9 | Select | PS |
| Start | 8 | 10 | Start | Turbo |
| LSB | LSB | LSB | TL | POV |
| RSB | RSB | RSB | TR | X/Y |
| Home | Home | Home | Mode | X/Y |
| Turbo | Turbo | Turbo | Turbo | Z/RZ |
| Clear | Clear | Clear | Clear | Z |
| D-Pad | POV | POV | X/Y | X/Y |
| L_Joystick | X/Y | X/Y | X/Y | X/Y |
| R_Joystick | Z | Z | Z/RZ | Z |
Wide Compatibility
Note: You can only choose one mode to connect with the controller. Different modes cannot operate simultaneously.
Connection Options:
- 2.4GHz Wireless
- USB Wired
Connecting 2.4G Device
- Plug in the [2.4G USB Receiver] into a USB port.
- Press the [Home Button] to turn on the controller. The [LED Indicator] lights will illuminate once the controller is powered on.
Power Off:
Simultaneously press [LSB] + [RSB] + [Back Button] + [Start Button] to turn off the controller.
Note: You can plug in the USB Type-C cable to charge the controller if the battery is low during gameplay.
Connecting Wired Device
- Plug the USB Type-C cable into the controller and your computer.
- Press the [Home Button] to enter Wired Mode. If the [Home Button] is not pressed, the controller will be in charging mode only.
- The [LED Indicator] will illuminate once the controller is connected.
Note: The controller prioritizes connecting to 2.4G mode by default. If you plug in the cable and the [2.4G USB Receiver] simultaneously, the wired function will only be for charging.
LED Indicator
| Platform Mode | LED Name | LED Location | How to Connect |
|---|---|---|---|
| PC/X-input | LED-2 | [LED-2] | Plug and Play |
| PC/D-input | LED-1 + LED-2 | [LED-1] + [LED-2] | Press [Home Button] for 5s under X-input Mode |
| Android/HID | LED-3 | [LED-3] | Plug and Play |
| PS3 | LED-1 | [LED-1] | Plug and Play |
Connect with PC Platform
PC/X-Input Mode
- Plug the [2.4G USB Receiver] into the PC.
- Press the [Home Button] to turn on the controller.
- The [LED Indicator] lights will flash during pairing.
- The [LED-2] will light up once the controller is connected.
Mode Exchange (PC/X-Input to PC/D-Input)
- Long press the [Home Button] for 3 seconds to switch to PC/D-Input mode. The [LED-1] & [LED-2] will light up.
- Long press the [Home Button] for 3 seconds again to switch back to PC/X-Input mode. The [LED-2] will light up.
Connect with Android Platform
- Plug the [2.4G USB Receiver] into the Android device (Smart TV, Set-Top Box, Smartphone, Tablet running Android v5.0 and above).
- Note: An OTG adaptor will be needed for smartphones and tablets.
- Press the [Home Button] to turn on the controller.
- The [LED Indicator] lights will flash during pairing.
- The [LED-3] will light up once the controller is connected.
[OTG Adaptor]* is for demonstration only and not included in the package.
Connect with PlayStation 3
- Plug the [2.4G USB Receiver] into your PS3.
- Press the [Home Button] to turn on the controller.
- The [LED Indicator] lights will flash during pairing.
- The [LED-1] will light up once the controller is connected.
3D Joystick and D-Pad Switching
You can exchange the function of the [D-Pad] to the [3D Left Joystick] by pressing the [Start Button] and [3D Left Joystick Button] simultaneously. Repeat the same steps to return to the default function.
Turbo & Clear Function Setting
Enable Turbo Setting:
- Press and hold one or more buttons from A/B/X/Y/LB/RB/LT/RT.
- Then, press the [Turbo Button] to save the turbo function for the selected button(s).
- You can only set one combination of buttons at a time. To save multiple turbo settings, repeat step 1 for each desired button combination.
- For example: To set button A for turbo, press and hold A, then press the [Turbo Button]. To set buttons Y + B for turbo, press and hold Y + B, then press the [Turbo Button]. Repeat for all desired buttons.
Clear Turbo Setting:
- Press one or more buttons that have the turbo function enabled.
- Then, press the [Clear Button] to clear the turbo setting for that button.
- To clear all previously set turbo functions, you must clear them one by one by repeating the steps.
Charging/Low Battery Indicator
Charging:
- Flashing Green Light: Charging
- Solid Green: Fully Charged
Charging Time: 2.5 Hours
A flashing green light indicates when the battery is below 10%.
Playtime: Up to 13 Hrs
Sleep Mode: The [LED Indicator] will turn off, and the controller will enter sleep mode after 5 minutes of inactivity. Press the [Home Button] to wake the controller.
Specifications
| Connection | 2.4G Wireless + USB Wired |
| Operating Range | Up to 10 m |
| Receiver | USB Receiver |
| System Platform | PC, Android, PS3 |
| Trigger Type | Linear Trigger |
| Battery Type | 600mAh Lithium Battery |
| Charging Time | 2.5 Hours |
| Playtime | Up to 13 Hrs |
| Type-C Charging Cable | 100 cm |
| Size | 155 x 112 x 60 mm |
| Weight | 188 g |
| Color | Sports Red, Sports White |
