Redmi Note 14 Pro 5G

Product Overview

The Redmi Note 14 Pro 5G is a modern smartphone designed for user convenience and connectivity.

The device features a sleek design with essential controls and ports. On the sides, users will find volume up/down buttons and a power button. The bottom of the phone houses the USB-C port, used for charging and data transfer. The device utilizes a Nano-SIM card for cellular connectivity.

Regulatory Compliance

European Union (EU) Compliance

Xiaomi Communications Co., Ltd. declares that this digital mobile phone, supporting GSM / GPRS / EDGE / UMTS / LTE / 5G NR, Bluetooth, and Wi-Fi, complies with the essential requirements and other applicable provisions of Directive 2014/53/EU (RED). The full text of the EU Declaration of Conformity is available at www.mi.com/en/certification.

RF Exposure (SAR) Information

This device meets the EU limits for Specific Absorption Rate (SAR) for the general population or uncontrolled exposure (maximum permissible value of 2.0 W/kg averaged over 10 grams of tissue). During testing, the device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions simulating RF exposure during use close to the head and at a distance of 5 mm from the body. Compliance with SAR requirements for body-worn operation is maintained at a distance of 5 mm between the device and the human body. Users should maintain a distance of at least 5 mm from the body to comply with RF exposure levels. The use of metal-containing accessories for body-worn compliance has not been verified and should be avoided.

Highest SAR values: Head: 0.994 W/kg, Body (5 mm distance): 0.992 W/kg.

Frequency Bands and Power Levels (EU)

This mobile phone supports the following frequency bands in the EU with maximum radio-frequency power:

• GSM 900: 35.5 dBm
• GSM 1800: 32.5 dBm
• WCDMA 1/8: 25.7 dBm
• LTE 1/3/7/8/20/28/38/40/41: 25.7 dBm; LTE 42: 26 dBm
• 5G NR n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm; 5G NR n77/n78: 29 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz: 20 dBm
• Wi-Fi 5 GHz (5150–5250 MHz): 23 dBm; (5250–5350 MHz): 23 dBm; (5470-5725 MHz): 23 dBm; (5725-5850 MHz): 14 dBm
• NFC: 13.56 MHz < 42 dBuA/m at 10 m

5G connectivity depends on the country, operator, and user's operating conditions.

Federal Communications Commission (FCC) Compliance

This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed or used in accordance with instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

RF Exposure (SAR) Information (FCC)

This device meets government requirements for exposure to radio waves. The standard used in the exposure standard for wireless devices is a unit of measurement called the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg. This device was tested for body-worn operation and found to comply with FCC RF exposure guidelines when used with an accessory that does not contain metal and positions the device at least 1.0 cm from the body. Compliance with RF exposure requirements for body-worn accessories containing metal components has not been verified and certified, and therefore, their use should be avoided. Any accessories used for body-worn operation must ensure a distance of at least 1.0 cm between the device and the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this equipment to ensure compliance with FCC Class B limits.

Ukraine Compliance

Xiaomi Communications Co., Ltd. declares that the radio equipment type: Mobile Phone, brand "Redmi", model 24090RA29G (Redmi Note 14 Pro 5G) complies with the Technical Regulation on Radio Equipment, approved by Resolution of the Cabinet of Ministers of Ukraine dated May 24, 2017, No. 355.

The full text of the declaration of conformity is available at the following address: www.mi.com/en/certification.

Frequency Bands and Power Levels (Ukraine)

This mobile phone can operate in the following frequency bands in Ukraine with maximum radio-frequency power:

• GSM 900: 33 dBm, with a tolerance of ± 2 dBm
• GSM 1800: 30 dBm, with a tolerance of ± 2 dBm
• WCDMA band 1/8: 24 dBm, with a tolerance of +1.7/-3.7 dBm
• LTE band 3/7/8/20: 23 dBm, with a tolerance of ± 2.7 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz: 20 dBm
• Wi-Fi 5.1-5.7 GHz: 20 dBm
• Wi-Fi 5.7-5.8 GHz: 14 dBm
• NFC 13.56 MHz: 42 dBuA/m at 10 m

Electronic Marking and Device Reset

This device features an electronic marking with certification information. To access it, navigate to "Settings" > "About phone" > "Certification" or search for "Certification" in the Settings menu.

Reset Instructions: Path: Settings > About phone > Reset. You can quickly erase local data on the device using the 'Reset' function. Data subject to erasure includes accounts, contacts, photos and videos, applications, backups, SD card data, and other items on this device.

Model: 24090RA29G. The marking 2409 indicates that this product will be released after September 2024.

Safety Precautions

Please adhere to all applicable laws and regulations that restrict the use of mobile phones in certain situations or environments.

Do not use the phone in potentially explosive environments, such as near gas stations, in enclosed spaces on ships, in fuel or chemical storage areas, or on vehicles transporting them. Also, avoid areas where the air may be saturated with chemicals or fine particles like sand, dust, or metal powders. Comply with all posted signs to turn off wireless devices, such as your phone or other radio equipment. Turn off your mobile phone or wireless device in explosive areas or where it is required to turn off two-way radio or electronic devices to prevent potential hazards.

Do not use the phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with the current rules and regulations of hospitals and medical centers. If you have a medical device, consult your doctor and the device manufacturer to determine if the phone may interfere with its operation. To avoid potential interference with a pacemaker, always keep the mobile phone at least 15 cm (6 inches) away from it. To do this, hold the phone to your ear on the opposite side of the pacemaker and do not carry it in a breast pocket. To avoid interfering with medical equipment, do not use the phone near hearing aids, cochlear implants, or similar devices.

Comply with all air travel safety regulations and turn off the phone on board aircraft as required.

When driving a vehicle, use the phone in accordance with applicable traffic laws and regulations.

To avoid electric shock from lightning, do not use the phone outdoors during a thunderstorm.

Do not use the phone for calls while it is charging.

Do not use the phone in locations with high humidity, such as bathrooms. This could lead to electric shock, injury, fire, and damage to the charger.

Charging and Power

Connect the Redmi Note 14 Pro 5G to a computer using a USB data cable.

Use the USB cable included in the package with a 'Mi' brand charger and connect it to a power strip. You can also use a third-party charger that complies with USB 2.0 standards or higher protocols, and meets the requirements of the International Safety Standard for Information Technology Equipment (IEC 60950), Audio/Video, Information and Communication Technology Equipment (IEC 62368-1), and applicable laws and regulations in your country or region.

The product allows the use of chargers with a maximum output power of 45W. The maximum voltage should not exceed 11V, and the maximum current should not exceed 4.1A.

Using other chargers that do not meet the above requirements for charging the product may damage the product and cause personal or property damage.

The power supplied by the charger must be within the range of a minimum of 10W required by the radio equipment to a maximum of 45W for achieving maximum charging speed. Supports USB PD fast charging.