Manuals+

STANLEY UNDERWATER TOOLS

Selection, Innovation, Performance

Your One-Stop Shop for Hydraulic Tools and Attachments

SINKER DRILL

SINKER DRILL Model SK58

The STANLEY SK58 Sinker Drill is a heavy-duty rock drill designed for drilling underwater in concrete, rock, and masonry. Its feathering on/off valve allows for easy drill bit starting. The SK58 utilizes industry-standard drill steels and can drill holes up to 3" (75 mm) in diameter and up to 20' (6 m) deep. A direct drive rotation motor powers the 1" x 4½" hex shank drill steel, with adjustable speed from 0 to 300 rpm. Air is required to clear holes of debris. The tool is painted hi-visibility yellow.

Note: When hydraulic hose exceeds 100' (30.4 m) in length, increase the inside diameter (I.D.) of both pressure and return hoses. For more information, consult STANLEY Infrastructure.

Specifications
Model Capacity Steel Type Flow Range Working Pressure Circuit Type Rotation Speed Hydraulic Ports Couplers Hose Whips
SK58310
(NON-CE)		 3" HOLE, UP TO 20' DEEP 1" X 4¼" HEX SHANK (2.54 CM X 10.795 CM) 7-9 GPM / 26-34 LPM 1500-2000 PSI / 105-140 BAR OPEN CENTER 0-300 RPM -8 SAE OPENING NO YES

Accessories

  • Part No. 03971: FLUSH-FACE COUPLING SET, 3/8" NPT
  • Part No. 03974: FLUSH-FACE COUPLING SET, ½" NPT
  • Part No. 31848: DUAL HOSE, 50' X ½", WITH COUPLERS
  • Part No. 31972: DUAL HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58633: TWINNED HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58634: TWINNED HOSE, 50' X ½", WITH COUPLERS
  • Part No. 05177: CARBIDE ROCK BIT, FOR USE WITH AIR, 1⅜" DIAMETER, H-THREAD - REQUIRES DRILL STEEL
  • Part No. 05178: CARBIDE ROCK BIT, FOR USE WITH AIR, 1½" DIAMETER, H-THREAD - REQUIRES DRILL STEEL
  • Part No. 04914: CARBIDE ROCK BIT, FOR USE WITH AIR, 2" DIAMETER, H-THREAD - REQUIRES DRILL STEEL
  • Part No. 05170: DRILL STEEL FOR USE WITH AIR, 1 X 4½", H-THREAD, 24" U/C
  • Part No. 05171: DRILL STEEL FOR USE WITH AIR, 1 X 4½", H-THREAD, 48" U/C

HAMMER DRILL Model HD45

The STANLEY HD45 Hammer Drill features a feathering on/off valve and adjustable rotation speed for easy drill bit start-up and precise control. Its high-torque rotation motor drives standard 736 Skil hex carbide-tipped drill bits and is capable of drilling a 2" diameter hole up to 29" deep. Fluted drill bits do not require water or air for hole clearing. This drill is ideal for creating holes for setting anchor bolts. It is painted hi-visibility yellow.

Specifications
Model Chuck Capacity Steel Capacity Circuit Type Flow Range Optimum Flow Working Pressure Rotation Speed Hydraulic Ports Couplers
HD4531001 2" DIAMETER OR 4" CORE 736 SKIL HEX OPEN CENTER 7-9 GPM / 26-34 LPM 8 GPM / 30 LPM 1500-2000 PSI / 105-140 BAR 0-300 RPM 8 SAE O-RING VARIES

Accessories

  • Part No. 03971: FLUSH-FACE COUPLING SET, 3/8" NPT
  • Part No. 03974: FLUSH-FACE COUPLING SET, ½" NPT
  • Part No. 31848: DUAL HOSE, 50' X ½", WITH COUPLERS
  • Part No. 31972: DUAL HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58633: TWINNED HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58634: TWINNED HOSE, 50' X ½", WITH COUPLERS
  • Part No. 02280: CARBIDE BIT, ¾" X 24" OAL
  • Part No. 05163: CARBIDE BIT, 7/8" X 24" OAL
  • Part No. 02281: CARBIDE BIT, 1" X 24"OAL
  • Part No. 02282: CARBIDE BIT, 1¼" X 24" OAL
  • Part No. 05167: CARBIDE BIT, 1½" X 24" OAL
  • Part No. 02283: CARBIDE BIT, 2" X 24" OAL
  • Part No. 04668: CARBIDE BIT, 1" X 18" OAL
  • Part No. 04896: CARBIDE BIT, 1¾" X 36" OAL
  • Part No. 27902: PERCUSSION CORE BIT, 2½" DIAMETER X 6" OAL (PART #30279 REQUIRED)
  • Part No. 27904: PERCUSSION CORE BIT, 3" DIAMETER X 6" OAL (PART #30279 REQUIRED)
  • Part No. 30279: HD45 (SKIL 736) ADAPTER

IMPACT DRILL

IMPACT DRILL Model ID07

The STANLEY ID07 Impact Drill combines an impact wrench and a wood drill for underwater applications. The ¾" square drive impact wrench delivers torque up to 500 ft-lbs and can tighten or loosen nuts and bolts, as well as drive lag screws. When used with the 05079 adapter and wood boring bits, the ID07 can drill holes up to 11/16" in diameter into timber with no reactive torque for the diver. A trigger guard and hi-visibility yellow paint are standard.

Features

  • Integral STANLEY Hyrevz gear motor for high power and low weight.
  • Stainless Steel spools and fasteners.
  • Forward-Reverse with variable speed.
  • 500 ft-lbs / 675 Nm of impact torque.
  • Oversized trigger with guard for operator comfort.
  • Wiper seals on reversing and trigger spool.
  • Built-in reverse check valve for long seal life.
  • Plastisol-coated handle for comfortable ergonomic grip.
  • Forward handle position for better balance.
  • Open Center/Closed Center-Dual Spool Feature.
  • Cast-in lifting eye.
Specifications
Model Capacity Performance Flow Range Working Pressure Hydraulic Ports Connect size and type
ID0792001 ½ IN / 12.7MM TORQUE 500 FT LBS / 675 NM 4-12 GPM / 15-45 LPM 750-2000 PSI / 50-140 BAR 8 SAE ORINGS ⅜" MALE PIPE ADAPTER

Accessories

  • Part No. 03971: FLUSH-FACE COUPLING SET, 3/8" NPT
  • Part No. 03974: FLUSH-FACE COUPLING SET, ½" NPT
  • Part No. 31848: DUAL HOSE, 50' X ½", WITH COUPLERS
  • Part No. 31972: DUAL HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58633: TWINNED HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58634: TWINNED HOSE, 50' X ½", WITH COUPLERS
Wood Boring Bits
  • Part No. 05079: ADAPTOR ¾" FEMALE SQ. DR. X 7/16" QC HEX
  • Part No. 27850: WOOD BIT: 9/16" DIA. X 8" X 12" OAL
  • Part No. 27851: WOOD BIT: 11/16" DIA. X 8" X 12" OAL
  • Part No. 27852: WOOD BIT: 13/16" DIA. X 8" X 12" OAL
  • Part No. 27853: WOOD BIT: 15/16" DIA. X 8" X 12" OAL
  • Part No. 27854: WOOD BIT: 17/16" DIA. X 8" X 12" OAL
  • Part No. 27855: WOOD BIT: 9/16" DIA. X 12" X 16" OAL
  • Part No. 27856: WOOD BIT: 11/16" DIA. X 12" X 16" OAL
  • Part No. 27857: WOOD BIT: 13/16" DIA. X 12" X 16" OAL
  • Part No. 27858: WOOD BIT: 15/16" DIA. X 12" X 16" OAL
  • Part No. 27859: WOOD BIT: 17/16" DIA. X 12" X 16" OAL
  • Part No. 27860: WOOD BIT: 9/16" DIA. X 18" X 22" OAL
  • Part No. 27861: WOOD BIT: 11/16" DIA. X 18" X 22" OAL
  • Part No. 27862: WOOD BIT: 13/16" DIA. X 18" X 22" OAL
  • Part No. 27863: WOOD BIT: 15/16" DIA. X 18" X 22" OAL
  • Part No. 27864: WOOD BIT: 17/16" DIA. X 18" X 22" OAL

Note: Wood Boring Bits have 7/16" Quick Change, Hex Shank. Requires Part # 05079 Adaptor for use with ID07 U/W Impact/Drill.

DRILL Model DL07652

The STANLEY DL07 hydraulic drill is a forward/reverse, variable speed drill featuring a ½" keyed chuck for underwater drilling. The DL07 offers sufficient torque to drill most steel, masonry, wood, or coral. A two-position assist handle and trigger guard are standard. Refer to the chart below for speeds at select GPM of hydraulic flow. Painted hi-visibility yellow.

Features

  • Integral STANLEY Hyrevz gear motor for high torque at any drilling speed.
  • Stainless Steel spools and fasteners.
  • Forward-Reverse with variable speed.
  • Dual-position assist handle for increased control.
  • Oversized trigger with guard for operator comfort.
  • Wiper seals on reversing and trigger spool.
  • Built-in reverse check valve for long seal life.
  • Plastisol handle for comfortable ergonomic grip.
  • Forward handle position for better balance.
  • Open Center/Closed Center-Dual Spool Feature.
  • Cast-in lifting eye.
Specifications
Model Chuck Capacity Flow Range Working Pressure Couplers Torque
DL07652 ½" / 12MM 3-10 GPM / 11-38 LPM 1000-2000 PSI / 70-140 BAR ⅜" MALE PIPE ADAPTER 350-1250 RPM
DL0765201 ½" / 12MM 3-10 GPM / 11-38 LPM 1000-2000 PSI / 70-140 BAR ⅜" MALE PIPE ADAPTER 350-1250 RPM

DL07 Speed/Hydraulic Flow

Speed (RPM) Hydraulic Flow
350 3 GPM / 11.3 LPM
475 4 GPM / 15 LPM
750 6 GPM / 23 LPM
1000 8 GPM / 30 LPM
1250 10 GPM / 38 LPM

DL07 Torque at PSI/BAR

Torque PSI / BAR
4 FT LBS @ 500 PSI 0.5 NM @ 35 BAR
9 FT LBS @ 1000 PSI 1.2 NM @ 70 BAR
14 FT LBS @ 1500 PSI 1.9 NM @ 105 BAR
19 FT LBS @ 2000 PSI 2.6 NM @ 140 BAR

Accessories

  • Part No. 03971: FLUSH-FACE COUPLING SET, 3/8" NPT
  • Part No. 03974: FLUSH-FACE COUPLING SET, ½" NPT
  • Part No. 31848: DUAL HOSE, 50' X ½", WITH COUPLERS
  • Part No. 31972: DUAL HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58633: TWINNED HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58634: TWINNED HOSE, 50' X ½", WITH COUPLERS
  • Part No. 01857: ADJUSTABLE CHUCK AND ADAPTER, ¾" SQUARE X ¾"
  • Part No. 04365: ¾" CHUCK, 3 JT TAPER, USE 5/8" BITS

IMPACT WRENCHES

IMPACT WRENCHES Model IW12 IW16 IW24

The STANLEY IW Series offers medium to extreme duty square drive impact wrenches designed for the most demanding underwater bolting applications. Powered by an integral STANLEY Hyrevz motor, these impact wrenches provide impact intensity ranging from 250 ft-lbs to 3,500 ft-lbs. Designed to operate from a wide range of hydraulic circuits, these wrenches enable underwater bolting in the most extreme environments. Hi-visibility yellow paint is standard.

Features

  • Integral STANLEY Hyrevz gear motor for high torque.
  • Stainless Steel spools and fasteners.
  • Forward-Reverse with variable speed.
  • "D" style grip handle with inside trigger.
  • Feathering on/off trigger for precise control.
  • Adjustable impact intensity.
  • Durable swing hammer mechanism.
  • Cast-in lifting eye.
  • Pistol grip style handle dipped in Plastisol for comfortable ergonomic grip (available on IW12).
Specifications
Model Capacity Torque Flow Range Working Pressure Hydraulic Ports Connection Couplers Hose Whips
IW1234001 ¾" SQUARE DRIVE 250-1200 FT LBS / 340-1632 NM 4-12 GPM / 15-45 LPM 1000-2000 PSI / 70-140 BAR 8 SAE O-RINGS ⅜" NO NO
IW16350 1" SQUARE DRIVE 500-2500 FT LBS / 680-3400 NM 7-12 GPM / 26-45 LPM 1500-2000 PSI / 105-140 BAR 8 SAE O-RINGS ⅜" NO NO
IW24360 1½" SQUARE DRIVE 800-3500FT LBS / 1088-4760 NM 7-12 GPM / 26-45 LPM 1800-2000 PSI / 124-140 BAR 8 SAE O-RINGS ⅜" NO NO

Accessories

  • Part No. 03971: FLUSH-FACE COUPLING SET, 3/8" NPT
  • Part No. 03974: FLUSH-FACE COUPLING SET, ½" NPT
  • Part No. 06830: HOSE WHIP 18" LONG, -8 SAE X ½" NPT
  • Part No. 31848: DUAL HOSE, 50' X ½", WITH COUPLERS
  • Part No. 31972: DUAL HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58633: TWINNED HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58634: TWINNED HOSE, 50' X ½", WITH COUPLERS
  • Part No. 31203: EXTENSION, 10", 1" DRIVE (IW16 MODEL)
  • Part No. 33276: SOCKET RETAINER PIN, 1" SQUARE DRIVE SOCKET (IW16 MODEL)
  • Part No. 33277: SOCKET RETAINER RING, 1" SQUARE DRIVE SOCKET (IW16 MODEL)
  • Part No. 01857: ADJUSTABLE CHUCK & ADAPTER ¾" SQ FEMALE X ¾" CHUCK (IW12 MODEL)

CUT-OFF SAW & GRINDER

CUT-OFF SAW Model CO23

The CO23 Cut-Off Saw is a hydraulic-powered saw for dimensional cutting of metal, concrete, rock, masonry, and coral. It features a high-torque gear motor and a 10" blade capacity for abrasive and diamond wheels with a 1" arbor. The CO23 is designed for underwater operation and is painted hi-visibility yellow.

Features

  • Integral STANLEY Hyrevz gear motor produces high torque.
  • Direct drive motor.
  • Stainless Steel spools and fasteners.
  • Adjustable shoe for precise cuts.
  • Interlocking safety trigger.
  • Cast aluminum handle and guard for durability.
  • Counter-clockwise rotation.
  • Wide flow range.
Specifications
Model Capacity Performance Arbor Circuit Type Working Pressure Connection Size & Type
CO23341 10" / 25.4 CM WHEEL 3275 RPM / 15 GPM 1" / 2.5CM OPEN CENTER 1000-2000 PSI / 70-140 BAR ⅜" 8 SAE O-RINGS

Accessories

  • Part No. 03971: FLUSH-FACE COUPLING SET, 3/8" NPT
  • Part No. 03974: FLUSH-FACE COUPLING SET, ½" NPT
  • Part No. 06830: HOSE WHIP 18" LONG, -8 SAE X ½" NPT
  • Part No. 03694: 10" / 25.4 CM DIAMETER, 1" ARBOR, DIAMOND BLADE FOR CONCRETE
  • Part No. 04116: 10" / 25.4 CM DIAMETER, 1" ARBOR, ABRASIVE BLADE FOR CONCRETE
  • Part No. 04117: 10" / 25.4 CM DIAMETER, 1" ARBOR, ABRASIVE BLADE FOR ALUMINUM AND METAL
  • Part No. 31848: DUAL HOSE, 50' X ½", WITH COUPLERS
  • Part No. 31972: DUAL HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58633: TWINNED HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58634: TWINNED HOSE, 50' X ½", WITH COUPLERS

GRINDER Model GR29

The STANLEY Hydraulic GR29 Grinder is a right-angle grinder suitable for grinding and cleaning in underwater applications using various wheels, brushes, and attachments. Its high-torque gear motor drives a standard 5/8 - 11 threaded spindle. A 9" adjustable wheel guard, two-position assist handle, and trigger guard are standard. Painted hi-visibility yellow.

Features

  • Integral STANLEY Hyrevz gear motor produces high torque.
  • Stainless Steel spools and fasteners.
  • Two-position assist handle for right/left hand operation.
  • Oversized trigger with guard for diver comfort.
  • Adjustable wheel guard for infinite positions.
  • Plastisol-covered handle for comfortable ergonomic grip.
  • Suitable for grinding wheels, hull scrubbing brushes, wire and nylon brushes, barnacle busters, and Desmond wheels.
  • 3200 rpm @ 12 gpm.
  • Cast-in lifting eye.
Specifications
Model Capacity Spindle Circuit RPM Working Pressure Hydraulic Ports Hose Whips
GR2930101 9" / 23CM WHEEL 5/8" (1.58MM) - 11 THREADED OPEN CENTER 3200 @ 12 GPM / 45 LPM 1000-2000 PSI / 70-140 BAR 38 SAE ORINGS NO

Accessories

  • Part No. 03971: FLUSH-FACE COUPLING SET, 3/8" NPT
  • Part No. 03974: FLUSH-FACE COUPLING SET, ½" NPT
  • Part No. 06830: HOSE WHIP 18" LONG, -8 SAE X ½" NPT
  • Part No. 02587: GRINDING WHEEL FOR METAL, 9" DIAMETER X 5/8 - 11 THD
  • Part No. 02588: GRINDING WHEEL FOR MASONRY, 9" DIAMETER X 5/8 - 11 THD
  • Part No. 03691: GRINDING WHEEL, 7" DIAMETER X 5/8 - 11 THREAD
  • Part No. 05194: ADAPTER, 5/8 - 11 THREAD, DEPRESSED CENTER WHEEL
  • Part No. 31848: DUAL HOSE, 50' X ½", WITH COUPLERS
  • Part No. 31972: DUAL HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58633: TWINNED HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58634: TWINNED HOSE, 50' X ½", WITH COUPLERS

CHIPPING HAMMER

CHIPPING HAMMER Model CH15 CH18

The ergonomic "D" handle with a protected trigger prevents accidental operation. The handle is plastisol-coated for diver comfort. The CH18 features a slide latch-style tool bit retainer that accepts .580 hex shank, round collar tool bits. Painted hi-visibility yellow.

Features

  • Ergonomic "D" handle with protected trigger.
  • Stainless Steel spools and fasteners.
  • Handle is Plastisol coated for diver comfort.
  • Uses standard .580 hex shank, round collar tool bits.
  • High power to weight ratio.
  • Operates in any position.
Specifications
Model Steel Capacity Handle Type Circuit Type Flow Range Working Pressure Hydraulic Ports Coupler Hose Whips
CH18111 .580 HEX SHANK D" HANDLE WITH INSIDE TRIGGER OPEN CENTER 7-9 GPM / 26-34 LPM 1500-2000 PSI / 105-140 BAR 6 SAE O RING NO YES
CH1533101 .580 HEX SHANK "D" HANDLE WITH INSIDE TRIGGER OPEN CENTER 7-9 GPM / 26-34 LPM 1000-2000 PSI / 70-140 BAR 6 SAE O RING YES YES

Accessories

  • Part No. 03971: FFLUSH-FACE COUPLING SET, 3/8 " NPT
  • Part No. 03974: FLUSH-FACE COUPLING SET, ½" NPT
  • Part No. 31848: DUAL HOSE, 50' X ½", WITH COUPLERS
  • Part No. 31972: DUAL HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58633: TWINNED HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58634: TWINNED HOSE, 50' X ½", WITH COUPLERS
  • Part No. 02278: FLAT CHISEL, 1" X 18", .580 HEX SHANK, ROUND COLLAR (MODEL CH18)
  • Part No. 02279: BULL POINT, 1" X 18", .580 HEX SHANK, ROUND COLLAR (MODEL CH18)
  • Part No. 03690: CHISEL BIT, 1" X 9", .580 HEX SHANK, ROUND COLLAR (MODEL CH18)
  • Part No. 03963: CHISEL BIT, 2" X 5", .580 HEX SHANK, ROUND COLLAR (MODEL CH18)

CHAIN SAWS

CHAIN SAWS Model DS11 CS11 CS06

STANLEY underwater saws are built to withstand the most demanding underwater conditions. The DS11 Diamond Chain Saw is specifically designed for cutting solid concrete underwater, with the ability to plunge cut sea walls up to 18 inches thick. It is available in two bar lengths (15" and 18") and two chain types, depending on rebar and concrete hardness. The CS06 and CS11 are designed for cutting wood structures underwater, such as bridge pilings and dock timbers. Both feature the STANLEY Hyrevz motor for increased durability and power. The power-to-weight ratio of all these chainsaws is significantly higher than comparable chainsaws.

Features

  • Direct drive motor – no chain coast when trigger is released.
  • Integral STANLEY Hyrevz gear motor for durability and power.
  • Stainless Steel spools and fasteners.
  • Interlocking safety trigger and hand guard.
  • Order bar and chain separately – refer to chart for selection.
Specifications
Model Capacity Chain Type Circuit Type Flow Range Working Pressure Couplers Hose Whips Lubrication/ Cooling
DS115000 15 OR 18" / 38 OR 45 CM BAR DIAMOND IMPREGNATED CHAIN SEGMENTS OPEN CENTER 12 GPM / 45 LPM 1000-2000 PSI / 70-140 BAR YES YES INTERNAL WATER CHANNELS IN BAR
CS11150D 24,32,36,42 IN / 61,81,91,107 CM ⅜" PITCH OPEN CENTER ~14 GPM / 53 LPM 1500-2000 PSI / 105-140 BAR YES YES
CS06630 15 & 20" / 38 & 51 CM STANDARD FLOATING RIM SPROCKET & WEAR PLATES OPEN CENTER 7-9GPM / 26-34 LPM 1500-2000 PSI / 105-140 BAR NO NO

Material Hardness Chart

Extra Hard Hard Medium Soft Abrasive
Material Chert, Flint Basalt, Quartz, Granite River Rock Marble, Limestone, Sandstone Masonry, Brick, Block, Green Concrete
Approximate Moh's Scale 9 8, 7, 6 5, 4, 3
Reinforcing Steel Lots of Steel Some Steel No Steel
1" Double Mat Single Mat #5 #4 #3 Wire Mesh No Steel

Accessories

  • Part No. 30305: 15" BAR, SPROCKET NOSE
  • Part No. 56801: 15" DIAMOND CHAIN, ULTRA 32
  • Part No. 56803: 15" DIAMOND CHAIN, PINNACLE, 32
  • Part No. 30306: 18" BAR, SPROCKET NOSE
  • Part No. 56802: 18" DIAMOND CHAIN, ULTRA 37
  • Part No. 58632: 18" DIAMOND CHAIN, PINNACLE, 37
  • Part No. 03971: FLUSH-FACE COUPLING SET, 3/8" NPT
  • Part No. 03974: FLUSH-FACE COUPLING SET, ½" NPT
  • Part No. 06830: HOSE WHIP 18" LONG, -8 SAE X ½" NPT
  • Part No. 23517: SPROCKET WRENCH
  • Part No. 31848: DUAL HOSE, 50' X ½", WITH COUPLERS
  • Part No. 31972: DUAL HOSE, 25' X ½", WITH COUPLERS
  • Part No. 31972: TWINNED HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58634: TWINNED HOSE, 50' X ½", WITH COUPLERS
  • Part No. 20859: DIAMOND CHAIN BUTTERFLY REPAIR KIT
  • Part No. 20857: CHAIN REPAIR SPINNER
  • Part No. 20858: CHAIN REPAIR BREAKER
  • Part No. DCP30101: WATER PUMP, 12 VDC, BATTERY CLIP
  • Part No. DCP30100: WATER PUMP, 12 VDC, MARINE TYPE PLUG

PUMPS & BREAKERS

TRASH PUMPS & SUMP PUMPS

With a flow range of 450 to 800 GPM, the trash pumps offered by STANLEY Infrastructure are capable of moving high volumes of water, sand slurries, gravel, mud, and solids up to 4 inches in diameter. The SM50 Submersible Pump is a self-priming hydraulic dewatering pump with a 3-inch NPFT discharge and a flow rate of 500 gpm. Its cast stainless steel semi-closed impeller resists corrosion, and the cast aluminum housing is suited for high-volume and high-head pump applications. It can draw water down to 3½".

Specifications
Model Capacity Performance Flow Range Working Pressure Hydraulic Ports Connection Couplers Hose Whips
TP08013 4" (10.16CM) NPT 4" CAMLOCK 800 GPM / 3028 LPM 7-10 GPM / 26-38 LPM 2000 PSI / 140 BAR 10 PRESSURE / 12 RETURN ½" NPT YES NO
TP0300301 3" (7.62 CM) NPTF 3" CAMLOCK 450 GPM / 1703 LPM 7-9 GPM / 26-34 LPM 2000 PSI / 140 BAR 10 PRESSURE / 12 RETURN ⅜" MALE PIPE ADAPTER YES NO
SM50100 3" (7.62CM) NPTF 3" CAMLOCK 500 GPM / 1892 LPM 7-12 GPM / 26-45 LPM 1000-2000 PSI / 70-140 BAR 10 PRESSURE / 12 RETURN ⅜" MALE PIPE ADAPTER YES NO

Accessories

  • Part No. 03974: FLUSH-FACE COUPLING SET, ½ " NPT
  • Part No. 31848: DUAL HOSE, 50' X ½ ", WITH COUPLERS
  • Part No. 31972: DUAL HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58633: TWINNED HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58634: TWINNED HOSE, 50' X ½ ", WITH COUPLERS
  • Part No. 65624: DISCHARGE HOSE, LAY-FLAT, 4" DIAMETER X 25' WITH MALE & FEMALE 4" CAMLOCK COUPLERS

BREAKERS

STANLEY Infrastructure offers small to large underwater handheld breakers with weight classes from 50 lbs to 90 lbs. The BR87 is the hardest-hitting underwater breaker, suitable for rock breaking, coral removal, and rod and anchor driving. The feathering on/off valve on all breakers controls speed and allows for easier initial tool placement. Standard 1 1/8 " x 6" hex chuck and latch retainer. Painted hi-visibility yellow.

Weight Class Indicators: 40 LB (2-6" CONCRETE), 70 LB (6-8" CONCRETE), 90 LB (8+" CONCRETE).

Specifications
Model Performance Steel Capacity Handle Type Circuit Type Flow Range Working Pressure Hydraulic Ports Couplers Hose Whips
BR87320 1080 BPM @ 8 GPM 1⅛" X 6" HEX T-HANDLE OPEN CENTER 7-9 GPM / 26-34 LPM 1,500-2000 PSI / 105-140 BAR 8 SAE O-RING NO YES
BR67320 1300 BPM @ 8 GPM 1⅛" X 6" HEX T-HANDLE OPEN CENTER 7-9 GPM / 26-34 LPM 1,500-2000 PSI / 105-140 BAR 8 SAE O-RING NO YES
BR45350 1525 BPM @ 8 GPM 1" X 4½" HEX T-HANDLE OPEN CENTER 7-9 GPM / 26-34 LPM 1500-2000 PSI / 105-140 BAR 8 SAE O-RING NO YES

Accessories

  • Part No. 03971: FLUSH-FACE COUPLING SET, 3/8" NPT
  • Part No. 03974: FLUSH-FACE COUPLING SET, ½" NPT
  • Part No. 31848: DUAL HOSE, 50' X ½", WITH COUPLERS
  • Part No. 31972: DUAL HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58633: TWINNED HOSE, 25' X ½", WITH COUPLERS
  • Part No. 58634: TWINNED HOSE, 50' X ½", WITH COUPLERS
  • Part No. 02331: CLAY SPADE, 1⅛" HEX, 5½" WIDE BLADE
  • Part No. 02332: ASPHALT CUTTER, 1⅛" HEX, 5" WIDE BLADE
  • Part No. 02333: MOIL POINT, 1⅛" HEX, 14" UNDER COLLAR
  • Part No. 02334: 3" WIDE CHISEL, 1⅛" HEX, 14" UNDER COLLAR
  • Part No. 03990: NARROW CHISEL, 1⅛" HEX, 14" UNDER COLLAR
  • Part No. 04176: ROD DRIVER, 1⅛" HEX, 1" ROD
  • Part No. 08106: ASPHALT WEDGE, 1⅛" HEX
  • Part No. 07702: MOIL POINT, 1" HEX, 14" UNDER COLLAR
  • Part No. 07703: NARROW CHISEL, 1" HEX, 14" UNDER COLLAR
  • Part No. 07704: 3" WIDE CHISEL, 1" HEX, 14" UNDER COLLAR
  • Part No. 07705: CLAY SPADE, 1" HEX, 5½" WIDE BLADE
  • Part No. 07706: ASPHALT WEDGE, 1" HEX, 3" WIDE BLADE

PDF preview unavailable. Download the PDF instead.

STANLEY underwater JAN2020 Adobe PDF Library 15.0 Adobe InDesign 16.3 (Macintosh)

Related Documents

Preview Stanley Underwater Hydraulic Tools Catalog: Sinker Drills, Impact Wrenches, Saws & More
Explore the comprehensive range of Stanley underwater hydraulic tools, including sinker drills, hammer drills, impact drills, impact wrenches, cut-off saws, grinders, chipping hammers, chain saws, pumps, and breakers. Built for demanding underwater applications.
Preview Stanley Hydraulic Underwater Tools Product Catalog
Discover the comprehensive range of Stanley Hydraulic Tools designed for demanding underwater applications, including submersible pumps, drills, impact wrenches, grinders, saws, breakers, and power units.
Preview Stanley Underwater Hydraulic Tools Catalog
A comprehensive catalog showcasing Stanley's range of high-performance underwater hydraulic tools, including drills, impact wrenches, saws, grinders, chipping hammers, chain saws, pumps, and breakers, designed for demanding marine and construction applications.
Preview Stanley Railway Tools: Hydraulic Tools and Attachments Catalog
Comprehensive catalog of Stanley Infrastructure's hydraulic railway tools and attachments, including spike pullers, tie tampers, impact wrenches, rail saws, track jacks, grinders, power units, chainsaws, and more. Features detailed specifications, benefits, and accessory information.
Preview Stanley HH 100 Hand Held Hydraulic Tools Product Catalog 2015-2016
Discover the comprehensive 2015-2016 Stanley HH 100 Product Catalog, featuring a wide array of high-performance hand held hydraulic tools. This catalog details Stanley's powerful breakers, chipping hammers, diggers, post drivers, tampers, and earth augers, designed for professional construction, utility, and industrial applications. Learn about product specifications, features, and the durability and efficiency Stanley Hydraulic Tools provides.
Preview Stanley CH18 Chipping Hammer - Specifications, Accessories, and Warranty
Detailed specifications, available accessories, and warranty information for the Stanley CH18 hydraulic chipping hammer. Learn about its features, performance, and ordering options.
Preview Stanley Hand Held Hydraulic Tools 2015-2016 Product Catalog
Discover the comprehensive 2015-2016 Stanley Hand Held Hydraulic Tools Product Catalog. Explore a wide range of powerful and efficient hydraulic tools designed for professional use in construction, demolition, utilities, and industrial applications. Featuring breakers, saws, drills, pumps, power units, and more from Stanley Hydraulic Tools, a division of Stanley Black & Decker.
Preview Stanley CH18 Chipping Hammer: Specifications & Features | Hydraulic Tool
Explore the Stanley CH18 Chipping Hammer, a powerful and compact hydraulic tool. View specifications, features, accessories, and warranty information for this industrial-grade chipping hammer.