Manuals+

Stanley Underwater Hydraulic Tools

Selection, Innovation, Performance

Your One-Stop Shop for Hydraulic Tools and Attachments

SK Series: Sinker Drill

SK58 Sinker Drill

The STANLEY SK58 Sinker Drill is a heavy-duty rock drill designed for drilling underwater in concrete, rock, and masonry. Its feathering on/off valve makes starting the drill bit easy. The SK58 utilizes industry-standard drill steels and can drill up to a 3" (75 mm) diameter hole up to 20' (6 m) deep. The direct-drive rotation motor powers the 1" x 4½" hex shank drill steel and is adjustable between 0 and 300 rpm. Air is required to clear holes of debris. Painted hi-visibility yellow.

When hydraulic hose exceeds 100' (30.4 m) in length, increase the inside diameter (I.D.) of both pressure and return hoses. For more information, consult STANLEY.

Model Capacity Steel Type Flow Range Working Pressure Circuit Type Rotation Speed Hydraulic Ports Couplers Hose Whips
SK58310 (NON-CE) 3" HOLE, UP TO 20' DEEP 1" X 4¼" HEX SHANK (2.54 CM X 10.795 CM) 7-9 GPM / 26-34 LPM 1500-2000 PSI / 105-140 BAR OPEN CENTER 0-300 RPM -8 SAE OPENING NO YES

Accessories

Part No. Description Part No. Description
03971 FLUSH-FACE COUPLING SET, 3/8" NPT 04914 CARBIDE ROCK BIT, FOR USE WITH AIR, 2" DIAMETER, H-THREAD - REQUIRES DRILL STEEL
03974 FLUSH-FACE COUPLING SET, 1/2" NPT 05170 DRILL STEEL FOR USE WITH AIR, 1 X 4¼", H-THREAD, 24" U/C
31848 DUAL HOSE, 50' X 1/2", WITH COUPLERS 05171 DRILL STEEL FOR USE WITH AIR, 1 X 4¼", H-THREAD, 48" U/C
31972 DUAL HOSE, 25' X 1/2", WITH COUPLERS
58633 TWINNED HOSE, 25' X 1/2", WITH COUPLERS
58634 TWINNED HOSE, 50' X 1/2", WITH COUPLERS
05177 CARBIDE ROCK BIT, FOR USE WITH AIR, 13/8" DIAMETER, H-THREAD - REQUIRES DRILL STEEL
05178 CARBIDE ROCK BIT, FOR USE WITH AIR, 1½" DIAMETER, H-THREAD - REQUIRES DRILL STEEL

HD Series: Hammer Drill

HD45 Hammer Drill

The feathering on/off valve and adjustable rotation speed allows easy drill bit start-up and precise control. The high torque rotation motor drives standard 736 Skil hex carbide tipped drill bits and is capable of drilling a 2" diameter hole up to 29" deep. Fluted drill bits require no water or air to clear holes. Ideal for drilling holes for setting anchor bolts. Painted hi-visibility yellow.

Model Chuck Capacity Steel Capacity Circuit Type Flow Range Optimum Flow Working Pressure Rotation Speed Hydraulic Ports Couplers
HD4531001 2" DIAMETER OR 4" CORE 736 SKIL HEX OPEN CENTER 7-9 GPM / 26-34 LPM 8 GPM / 30 LPM 1500-2000 PSI / 105-140 BAR 0-300 RPM 8 SAE O-RING VARIES

Accessories

Part No. Description Part No. Description
03971 FLUSH-FACE COUPLING SET, 3/8" NPT 05167 CARBIDE BIT, 1½" X 24" OAL
03974 FLUSH-FACE COUPLING SET, 1/2" NPT 02283 CARBIDE BIT, 2" X 24" OAL
31848 DUAL HOSE, 50' X 1/2", WITH COUPLERS 04668 CARBIDE BIT, 1" X 18" OAL
31972 DUAL HOSE, 25' X 1/2", WITH COUPLERS 04896 CARBIDE BIT, 1¼" X 36" OAL
58633 TWINNED HOSE, 25' X 1/2", WITH COUPLERS 27902 PERCUSSION CORE BIT, 2½" DIAMETER X 6" OAL (PART #30279 REQUIRED)
58634 TWINNED HOSE, 50' X 1/2", WITH COUPLERS 27904 PERCUSSION CORE BIT, 3" DIAMETER X 6" OAL (PART #30279 REQUIRED)
02280 CARBIDE BIT, 3/4" X 24" OAL 30279 HD45 (SKIL 736) ADAPTER
05163 CARBIDE BIT, 7/8" X 24" OAL
02281 CARBIDE BIT, 1" X 24" OAL
02282 CARBIDE BIT, 1¼" X 24" OAL

ID Series: Impact Drill

ID07 Impact Drill

The STANLEY ID07 Impact Drill is two hydraulic underwater tools in one: an impact wrench and a wood drill. The " square drive impact wrench delivers torque up to 500 ft lbs and can tighten or loosen nuts and bolts and drive lag screws. Use the ID07 with the 05079 adapter and wood boring bits to drill up to 11/16" diameter holes into timber with no reactive torque to the diver. Trigger guard and hi-visibility yellow paint is standard.

Features

Model Capacity Performance Flow Range Working Pressure Hydraulic Ports Connect size and type
ID0792001 1/2 IN / 12.7MM TORQUE 500 FT LBS / 675 NM 4-12 GPM / 15-45 LPM 750-2000 PSI / 50-140 BAR 8 SAE ORINGS 3/8" MALE PIPE ADAPTER

Accessories

Part No. Description Part No. Description
03971 FLUSH-FACE COUPLING SET, 3/8" NPT 05079 ADAPTOR 1/2" FEMALE SQ. DR. X 7/16 " QC HEX
03974 FLUSH-FACE COUPLING SET, 1/2" NPT 27850 WOOD BIT: 9/16" DIA. X 8" X 12" OAL
31848 DUAL HOSE, 50' X 1/2", WITH COUPLERS 27851 WOOD BIT: 11/16" DIA. X 8" X 12" OAL
31972 DUAL HOSE, 25' X 1/2", WITH COUPLERS 27852 WOOD BIT: 13/16" DIA. X 8" X 12" OAL
58633 TWINNED HOSE, 25' X 1/2", WITH COUPLERS 27853 WOOD BIT: 15/16" DIA. X 8" X 12" OAL
58634 TWINNED HOSE, 50' X 1/2", WITH COUPLERS 27854 WOOD BIT: 17/16" DIA. X 8" X 12" OAL
27855 WOOD BIT: 9/16" DIA. X 12" X 16" OAL
27856 WOOD BIT: 11/16" DIA. X 12" X 16" OAL
27857 WOOD BIT: 13/16" DIA. X 12" X 16" OAL
27858 WOOD BIT: 15/16" DIA. X 12" X 16" OAL
27859 WOOD BIT: 17/16" DIA. X 12" X 16" OAL
27860 WOOD BIT: 9/16" DIA. X 18" X 22" OAL
27861 WOOD BIT: 11/16" DIA. X 18" X 22" OAL
27862 WOOD BIT: 13/16" DIA. X 18" X 22" OAL
27863 WOOD BIT: 15/16" DIA. X 18" X 22" OAL
27864 WOOD BIT: 17/16" DIA. X 18" X 22" OAL

Wood Boring Bits have 7/16" Quick Change, Hex Shank. Requires Part # 05079 Adaptor for use with ID07 U/W Impact/Drill.

DL Series: Drill

DL07652 Drill

The STANLEY DL07 hydraulic drill is a forward/reverse, variable speed drill with a 1/2" keyed chuck for underwater drilling applications. The DL07 has more than enough torque to drill most steel, masonry, wood, or coral. A two-position assist handle and trigger guard are standard. Painted hi-visibility yellow.

Features

Model Chuck Capacity Flow Range Working Pressure Couplers Torque
DL07652 1/2" / 12MM 3-10 GPM / 11-38 LPM 1000-2000 PSI / 70-140 BAR 3/8" MALE PIPE ADAPTER 350-1250 RPM
DL0765201 1/2" / 12MM 3-10 GPM / 11-38 LPM 1000-2000 PSI / 70-140 BAR 3/8" MALE PIPE ADAPTER 350-1250 RPM

DL07 Speed/Hydraulic Flow

Speed (RPM) Hydraulic Flow
350 3 GPM / 11.3 LPM
475 4 GPM / 15 LPM
750 6 GPM / 23 LPM
1000 8 GPM / 30 LPM
1250 10 GPM / 38 LPM

DL07 Torque at PSI/BAR

Torque PSI / BAR
4 FT LBS @ 500 PSI 0.5 NM @ 35 BAR
9 FT LBS @ 1000 PSI 1.2 NM @ 70 BAR
14 FT LBS @ 1500 PSI 1.9 NM @ 105 BAR
19 FT LBS @ 2000 PSI 2.6 NM @ 140 BAR

Accessories

Part No. Description Part No. Description
03971 FLUSH-FACE COUPLING SET, 3/8" NPT 01857 ADJUSTABLE CHUCK AND ADAPTER, 3/4" SQUARE X 3/4"
03974 FLUSH-FACE COUPLING SET, 1/2" NPT 04365 3/4" CHUCK, 3 JT TAPER, USE 5/8" BITS
31848 DUAL HOSE, 50' X 1/2", WITH COUPLERS
31972 DUAL HOSE, 25' X 1/2", WITH COUPLERS
58633 TWINNED HOSE, 25' X 1/2", WITH COUPLERS
58634 TWINNED HOSE, 50' X 1/2", WITH COUPLERS

IW Series: Impact Wrenches

IW12, IW16, IW24 Impact Wrenches

The STANLEY IW Series of tools are medium to extreme duty square drive impact wrenches designed for some of the toughest underwater bolting applications. Powered by an integral STANLEY Hyrevz motor, these impact wrenches have an impact intensity ranging from 250 ft lbs of torque to 3,500 ft lbs of torque. Designed to run from a wide range of hydraulic circuits, this wrench allows underwater bolting in the most extreme applications. Hi-visibility yellow paint is standard.

Features

Model Capacity Torque Flow Range Working Pressure Hydraulic Ports Connection Couplers Hose Whips
IW1234001 3/4" SQUARE DRIVE 250-1200 FT LBS / 340-1632 NM 4-12 GPM / 15-45 LPM 1000-2000 PSI / 70-140 BAR 8 SAE O-RINGS 3/8" NO NO
IW16350 1" SQUARE DRIVE 500-2500 FT LBS / 680-3400 NM 7-12 GPM / 26-45 LPM 1500-2000 PSI / 105-140 BAR 8 SAE O-RINGS 3/8" NO NO
IW24360 1½" SQUARE DRIVE 800-3500FT LBS / 1088-4760 NM 7-12 GPM / 26-45 LPM 1800-2000 PSI / 124-140 BAR 8 SAE O-RINGS 3/8" NO NO

Accessories

Part No. Description Part No. Description
03971 FLUSH-FACE COUPLING SET, 3/8" NPT 33277 SOCKET RETAINER RING, 1" SQUARE DRIVE SOCKET (IW16 MODEL)
03974 FLUSH-FACE COUPLING SET, 1/2" NPT 01857 ADJUSTABLE CHUCK & ADAPTER 3/4" SQ FEMALE X 3/4" CHUCK (IW12 MODEL)
06830 HOSE WHIP 18" LONG, -8 SAE X 1/2" NPT
31848 DUAL HOSE, 50' X 1/2", WITH COUPLERS
31972 DUAL HOSE, 25' X 1/2", WITH COUPLERS
58633 TWINNED HOSE, 25' X 1/2", WITH COUPLERS
58634 TWINNED HOSE, 50' X 1/2", WITH COUPLERS
31203 EXTENSION, 10", 1" DRIVE (IW16 MODEL)
33276 SOCKET RETAINER PIN, 1" SQUARE DRIVE SOCKET (IW16 MODEL)

CO Series: Cut-Off Saw

CO23 Cut-Off Saw

The CO23 Cut-Off Saw is a hydraulic-powered saw for dimensional cutting of metal, concrete, rock, masonry, and coral. It has a high-torque gear motor and a 10" blade capacity for abrasive and diamond wheels with a 1" arbor. The CO23 is designed for underwater operation and is painted hi-visibility yellow.

Features

Model Capacity Performance Arbor Circuit Type Working Pressure Connection Size & Type
CO23341 10" / 25.4 CM WHEEL 3275 RPM / 15 GPM 1" / 2.5CM 1000-2000 PSI / 70-140 BAR 3/8" 8 SAE O-RINGS

Accessories

Part No. Description Part No. Description
03971 FLUSH-FACE COUPLING SET, 3/8" NPT 04117 10" / 25.4 CM DIAMETER, 1" ARBOR, ABRASIVE BLADE FOR ALUMINUM AND METAL
03974 FLUSH-FACE COUPLING SET, 1/2" NPT 31848 DUAL HOSE, 50' X 1/2", WITH COUPLERS
06830 HOSE WHIP 18" LONG, -8 SAE X 1/2" NPT 31972 DUAL HOSE, 25' X 1/2", WITH COUPLERS
03694 10" / 25.4 CM DIAMETER, 1" ARBOR, DIAMOND BLADE FOR CONCRETE 58633 TWINNED HOSE, 25' X 1/2", WITH COUPLERS
04116 10" / 25.4 CM DIAMETER, 1" ARBOR, ABRASIVE BLADE FOR CONCRETE 58634 TWINNED HOSE, 50' X 1/2", WITH COUPLERS

GR Series: Grinder

GR29 Grinder

The STANLEY Hydraulic GR29 Grinder is a right-angle grinder that can be used for grinding and cleaning in underwater applications with a variety of wheels, brushes, and attachments. The high-torque gear motor drives a standard 5/8 - 11 threaded spindle. A 9" adjustable wheel guard, two-position assist handle, and trigger guard are standard. Painted hi-visibility yellow.

Features

Model Capacity Spindle Circuit RPM Working Pressure Hydraulic Ports Hose Whips
GR2930101 9" / 23CM WHEEL 5/8" (1.58MM) - 11 THREADED OPEN CENTER 3200 @ 12 GPM / 45 LPM 1000-2000 PSI / 70-140 BAR 3/8 SAE ORINGS NO

Accessories

Part No. Description Part No. Description
03971 FLUSH-FACE COUPLING SET, 3/8" NPT 03691 GRINDING WHEEL, 7" DIAMETER X 5/8 - 11 THREAD
03974 FLUSH-FACE COUPLING SET, 1/2" NPT 05194 ADAPTER, 5/8 - 11 THREAD, DEPRESSED CENTER WHEEL
06830 HOSE WHIP 18" LONG, -8 SAE X 1/2" NPT 31848 DUAL HOSE, 50' X 1/2", WITH COUPLERS
02587 GRINDING WHEEL FOR METAL, 9" DIAMETER X 5/8 - 11 THD 31972 DUAL HOSE, 25' X 1/2", WITH COUPLERS
02588 GRINDING WHEEL FOR MASONRY, 9" DIAMETER X 5/8 - 11 THD 58633 TWINNED HOSE, 25' X 1/2", WITH COUPLERS
58634 TWINNED HOSE, 50' X 1/2", WITH COUPLERS

CH Series: Chipping Hammer

CH15, CH18 Chipping Hammer

The ergonomic "D" handle with protected trigger prevents accidental operation of the tool. The handle is plastisol coated for diver comfort. The CH18 has a slide latch style tool bit retainer that will accept .580 hex shank, round collar tool bits. Painted hi-visibility yellow.

Features

Model Steel Capacity Handle Type Circuit Type Flow Range Working Pressure Hydraulic Ports Coupler Hose Whips
CH18111 .580 HEX SHANK "D" HANDLE WITH INSIDE TRIGGER OPEN CENTER 7-9 GPM / 26-34 LPM 1500-2000 PSI / 105-140 BAR 6 SAE O RING NO YES
CH1533101 .580 HEX SHANK "D" HANDLE WITH INSIDE TRIGGER OPEN CENTER 7-9 GPM / 26-34 LPM 1000-2000 PSI / 70-140 BAR 6 SAE O RING YES YES

Accessories

Part No. Description Part No. Description
03971 FLUSH-FACE COUPLING SET, 3/8 " NPT 58634 TWINNED HOSE, 50' X 1/2", WITH COUPLERS
03974 FLUSH-FACE COUPLING SET, 1/2" NPT 02278 FLAT CHISEL, 1" X 18", .580 HEX SHANK, ROUND COLLAR (MODEL CH18)
31848 DUAL HOSE, 50' X 1/2", WITH COUPLERS 02279 BULL POINT, 1" X 18", .580 HEX SHANK, ROUND COLLAR (MODEL CH18)
31972 DUAL HOSE, 25' X 1/2", WITH COUPLERS 03690 CHISEL BIT, 1" X 9", .580 HEX SHANK, ROUND COLLAR (MODEL CH18)
58633 TWINNED HOSE, 25' X 1/2", WITH COUPLERS 03963 CHISEL BIT, 2" X 5", .580 HEX SHANK, ROUND COLLAR (MODEL CH18)

DS/CS Series: Chain Saws

DS11, CS11, CS06 Chain Saws

STANLEY underwater saws are built to withstand the most demanding underwater conditions. The DS11 Diamond Chain Saw is specifically designed to cut solid concrete underwater with the ability to plunge cut sea walls up to 18 inches thick. It comes in two available bar lengths (15" and 18") and two different chains depending on the amount of rebar and hardness of concrete. The CS06 and CS11 are both designed to cut wood structures underwater such as bridge pilings, pier, and dock timbers. Both feature the STANLEY Hyrevz motor for increased durability and power. The power-to-weight ratio of all chainsaws is significantly higher than any other comparable chainsaw.

Features

Model Capacity Chain Type Circuit Type Flow Range Working Pressure Couplers Hose Whips Lubrication/ Cooling
DS115000 15 OR 18" / 38 OR 45 CM BAR DIAMOND IMPREGNATED CHAIN SEGMENTS OPEN CENTER 12 GPM / 45 LPM 1000-2000 PSI / 70-140 BAR YES YES INTERNAL WATER CHANNELS IN BAR
CS11150D 24,32,36,42 IN / 61,81,91,107 CM 3/8" PITCH OPEN CENTER ~14 GPM / 53 LPM 1500-2000 PSI / 105-140 BAR YES YES
CS06630 15 & 20" / 38 & 51 CM STANDARD FLOATING RIM SPROCKET & WEAR PLATES OPEN CENTER 7-9 GPM / 26-34 LPM 1500-2000 PSI / 105-140 BAR NO NO

Aggregate Material

Material Approximate Moh's Scale Reinforcing
Extra Hard Chert Flint 9 Lots of Steel 1" Double Mat
Hard Basalt Quartz Granite River Rock 8 Some Steel Single Mat #5
Medium Marble Limestone Sandstone 7 No Steel #4
Soft 6 #3
Abrasive Masonry, Brick, Block, Green Concrete 5 Wire Mesh

Accessories

Part No. Description Part No. Description
30305 15" BAR, SPROCKET NOSE 31848 DUAL HOSE, 50' X 1/2", WITH COUPLERS
56801 15" DIAMOND CHAIN, ULTRA 32 31972 DUAL HOSE, 25' X 1/2", WITH COUPLERS
56803 15" DIAMOND CHAIN, PINNACLE, 32 31972 TWINNED HOSE, 25' X 1/2", WITH COUPLERS
30306 18" BAR, SPROCKET NOSE 58634 TWINNED HOSE, 50' X 1/2", WITH COUPLERS
56802 18" DIAMOND CHAIN, ULTRA 37 20859 DIAMOND CHAIN BUTTERFLY REPAIR KIT
58632 18" DIAMOND CHAIN, PINNACLE, 37 20857 CHAIN REPAIR SPINNER
03971 FLUSH-FACE COUPLING SET, 3/8" NPT 20858 CHAIN REPAIR BREAKER
03974 FLUSH-FACE COUPLING SET, 1/2" NPT DCP30101 WATER PUMP, 12 VDC, BATTERY CLIP
06830 HOSE WHIP 18" LONG, -8 SAE X 1/2" NPT DCP30100 WATER PUMP, 12 VDC, MARINE TYPE PLUG
23517 SPROCKET WRENCH

TP & SM Series: Trash Pumps & Sump Pumps

SM50, TP03, TP08 Pumps

With a range of 450 to 800 GPM of output flow, the trash pumps offered by STANLEY are capable of moving high volumes of water, sand slurries, gravel, mud, and solids up to 4 inches in diameter. The SM50 Submersible Pump is a self-priming hydraulic dewatering pump with a 3-inch NPFT discharge and a discharge flow of 500 gpm. The cast stainless steel semi-closed impeller resists corrosion, and the cast aluminum housing fits the need for high volume and high head pump applications. Can draw water down to 3½".

Model Capacity Performance Flow Range Working Pressure Hydraulic Ports Connection Couplers Hose Whips
TP08013 4" (10.16CM) NPT 4" CAMLOCK 800 GPM / 3028 LPM 7-10 GPM / 26-38 LPM 2000 PSI / 140 BAR 10 PRESSURE / 12 RETURN 1/2" NPT YES NO
TP0300301 3" (7.62 CM) NPTF 3" CAMLOCK 450 GPM / 1703 LPM 7-9 GPM / 26-34 LPM 2000 PSI / 140 BAR 10 PRESSURE / 12 RETURN 3/8" MALE PIPE ADAPTER YES NO
SM50100 3" (7.62CM) NPTF 3" CAMLOCK 500 GPM / 1892 LPM 7-12 GPM / 26-45 LPM 1000-2000 PSI / 70-140 BAR 10 PRESSURE / 12 RETURN 3/8" MALE PIPE ADAPTER YES NO

Accessories

Part No. Description
03974 FLUSH-FACE COUPLING SET, 1/2 " NPT
31848 DUAL HOSE, 50' X 1/2 ", WITH COUPLERS
31972 DUAL HOSE, 25' X 1/2", WITH COUPLERS
58633 TWINNED HOSE, 25' X 1/2", WITH COUPLERS
58634 TWINNED HOSE, 50' X 1/2 ", WITH COUPLERS
65624 DISCHARGE HOSE, LAY-FLAT, 4" DIAMETER X 25' WITH MALE & FEMALE 4" CAMLOCK COUPLERS

BR Series: Breakers

BR45, BR67, BR87 Breakers

STANLEY offers small to large size underwater hand-held breakers with a weight class ranging from 50 lbs to 90 lbs. The BR87 is the hardest-hitting underwater breaker offered and can be used for rock breaking, coral removal, and rod and anchor driving. The feathering on/off valve on all of our breakers controls the speed and allows for easier initial tool placement. Standard 1 1/8 " x 6" hex chuck and latch retainer. Painted hi-visibility yellow.

Model Performance Steel Capacity Handle Type Circuit Type Flow Range Working Pressure Hydraulic Ports Couplers Hose Whips
BR87320 1080 BPM @ 8 GPM 1 1/8" X 6" HEX T-HANDLE OPEN CENTER 7-9 GPM / 26-34 LPM 1,500-2000 PSI / 105-140 BAR 8 SAE O-RING NO YES
BR67320 1300 BPM @ 8 GPM 1 1/8" X 6" HEX T-HANDLE OPEN CENTER 7-9 GPM / 26-34 LPM 1,500-2000 PSI / 105-140 BAR 8 SAE O-RING NO YES
BR45350 1525 BPM @ 8 GPM 1" X 4¼" HEX T-HANDLE OPEN CENTER 7-9 GPM / 26-34 LPM 1500-2000 PSI / 105-140 BAR 8 SAE O-RING NO YES

Accessories

Part No. Description Part No. Description
03971 FLUSH-FACE COUPLING SET, 3/8" NPT 02333 MOIL POINT, 1 1/8" HEX, 14" UNDER COLLAR
03974 FLUSH-FACE COUPLING SET, 1/2" NPT 02334 3" WIDE CHISEL, 1 1/8" HEX, 14" UNDER COLLAR
31848 DUAL HOSE, 50' X 1/2", WITH COUPLERS 03990 NARROW CHISEL, 1 1/8" HEX, 14" UNDER COLLAR
31972 DUAL HOSE, 25' X 1/2", WITH COUPLERS 04176 ROD DRIVER, 1 1/8" HEX, 1" ROD
58633 TWINNED HOSE, 25' X 1/2", WITH COUPLERS 08106 ASPHALT WEDGE, 1 1/8" HEX
58634 TWINNED HOSE, 50' X 1/2", WITH COUPLERS 07702 MOIL POINT, 1" HEX, 14" UNDER COLLAR
02331 CLAY SPADE, 1 1/8" HEX, 5 1/2" WIDE BLADE 07703 NARROW CHISEL, 1" HEX, 14" UNDER COLLAR
02332 ASPHALT CUTTER, 1 1/8" HEX, 5" WIDE BLADE 07704 3" WIDE CHISEL, 1" HEX, 14" UNDER COLLAR
07705 CLAY SPADE, 1" HEX, 5 1/2 " WIDE BLADE
07706 ASPHALT WEDGE, 1" HEX, 3" WIDE BLADE

PDF preview unavailable. Download the PDF instead.

Catalog - STANLEY - Underwater Tools 0 Adobe PDF Library 17.0 Adobe InDesign 19.5 (Macintosh)

Related Documents

Preview Stanley Underwater Hydraulic Tools Catalog and Specifications
Explore the comprehensive range of Stanley underwater hydraulic tools, including drills, impact wrenches, saws, grinders, breakers, pumps, and more. Find detailed specifications, features, and accessories for demanding marine and underwater applications.
Preview Stanley Hydraulic Underwater Tools Product Catalog
Discover the comprehensive range of Stanley Hydraulic Tools designed for demanding underwater applications, including submersible pumps, drills, impact wrenches, grinders, saws, breakers, and power units.
Preview Stanley Underwater Hydraulic Tools Catalog: Sinker Drills, Impact Wrenches, Saws & More
Explore the comprehensive range of Stanley underwater hydraulic tools, including sinker drills, hammer drills, impact drills, impact wrenches, cut-off saws, grinders, chipping hammers, chain saws, pumps, and breakers. Built for demanding underwater applications.
Preview Stanley HH 100 Hand Held Hydraulic Tools Product Catalog 2015-2016
Discover the comprehensive 2015-2016 Stanley HH 100 Product Catalog, featuring a wide array of high-performance hand held hydraulic tools. This catalog details Stanley's powerful breakers, chipping hammers, diggers, post drivers, tampers, and earth augers, designed for professional construction, utility, and industrial applications. Learn about product specifications, features, and the durability and efficiency Stanley Hydraulic Tools provides.
Preview STANLEY B-Series Cordless Tools Operating Manual
Comprehensive guide for STANLEY B-Series Cordless Tools, covering safe operation, setup, specifications, maintenance, and troubleshooting for industrial assembly applications.
Preview Stanley Hand Held Hydraulic Tools 2015-2016 Product Catalog
Discover the comprehensive 2015-2016 Stanley Hand Held Hydraulic Tools Product Catalog. Explore a wide range of powerful and efficient hydraulic tools designed for professional use in construction, demolition, utilities, and industrial applications. Featuring breakers, saws, drills, pumps, power units, and more from Stanley Hydraulic Tools, a division of Stanley Black & Decker.
Preview Stanley Railway Tools: Hydraulic Tools and Attachments Catalog
Comprehensive catalog of Stanley Infrastructure's hydraulic railway tools and attachments, including spike pullers, tie tampers, impact wrenches, rail saws, track jacks, grinders, power units, chainsaws, and more. Features detailed specifications, benefits, and accessory information.
Preview Stanley CH18 Chipping Hammer - Specifications, Accessories, and Warranty
Detailed specifications, available accessories, and warranty information for the Stanley CH18 hydraulic chipping hammer. Learn about its features, performance, and ordering options.