Product Overview
The Stanley CH18 chipping hammer, featuring an ergonomic "D" handle, offers a powerful yet lightweight alternative to air-powered tools. Both the handle and the tool holder are designed with shock and heat insulation for enhanced operator comfort. Its compact design makes it ideal for use in confined working conditions. The CH18 is compatible with standard 0.580-inch round collar steels. Underwater models are available.
Specifications
| ITEM | U.S.A. | METRIC |
|---|---|---|
| Capacity | 2 1/2 in Shank x 0.580 in Hex | 63 mm Shank x 15 mm Hex |
| Weight | 24 lb | 11 kg |
| Length | 20 in | 51 cm |
| Width | 3 in | 8cm |
| Pressure | 1500-2000 psi | 105-140 bar |
| Flow Range | 7-9 gpm | 26-34 lpm |
| Optimum Flow | 8 gpm | 30 lpm |
| Porting | 6 SAE O-Ring | |
| Hose Whips | Yes | |
| Connect Size and Type | 3/8 in Male Pipe Hose End |
Accessories
| PART NO. | DESCRIPTION |
|---|---|
| 02277 | Bushing Tool Bit 9-Tooth |
| 02278 | Flat Chisel Bit 1 x 18 in/2.5 x 45.7 cm |
| 02279 | Bull Point 1 x 18 in/2.5 x 47.5 cm |
| 03690 | Chisel Bit 1 x 9 in/2.5 x 22.9 cm |
| 03963 | Scaling Chisel 2 x 9 in/5 x 22.9 cm |
Warranty
Stanley Hydraulic Tools and their associated parts are warranted against defects in materials and workmanship for a period of twelve months from the date of purchase. Stanley Hydraulic Tools reserves the right to repair or replace only those parts which prove to have been defective at the time of purchase. This warranty becomes void if maximum flow and pressure ratings are exceeded.
Ordering Information
| PART NO. | SYSTEM |
|---|---|
| CH18111 | Open Center |
| CH18311 | Open Center (Underwater Model) |
Company Information and Disclaimers
All Stanley Hydraulic Tools, Parts, Accessories and allied equipment are subject to design improvements, specification and price changes at any time without notice and with no obligation to units already sold. Weights, dimensions and operating specifications listed herein are subject to change without notice. Where specifications are critical to your application, please consult Stanley Hydraulic Tools.
Call the Stanley Hydraulic Tools dealer nearest you...
Stanley Hydraulic Tools
3810 SE Naef Road
Milwaukie, OR 97267-5698
Tel: 503-659-5660
Fax: 503-652-1780
Product Part Number: P/N 14498 08/98 1.5M
