Ecotap Duo Wide Plus
A brand of Legrand
General Specifications
| Reference Number | 65458064 |
| Reference Number (Calibration Law) | 65458061 |
| Dimensions H x W x D (mm) | 1400 x 490 x 240 |
| Housing Material | Steel 3.7 mm |
| Standard Color | Housing: Ral 6018 / Cover: Ral 9016 for 65458061, 65458064 |
| Steel Treatment | Corrosion protection (KTL) and powder coating |
| Weight (kg) | 90kg |
| Number of Charging Points | 2 |
| Socket | Type 2 |
| Cable | Type 2 |
| Cable | Type 2 |
Electrical Specifications
| Power Output per Socket | 0 to 22 kW |
| Operating Voltage (Ue) / Current (In A) for the Charger | Single-phase wiring, Phase + N 230V~ from 0 to 80A (specified at 20°C) Three-phase wiring, 3 Phases + N 400V~ from 0 to 80A (specified at 20°C) |
| Operating Voltage (Ue) / Current (In A) per Charging Point | Single-phase wiring, Phase + N 230V~ from 0 to 32A (specified at 20°C) Three-phase wiring, 3 Phases + N 400V~ from 0 to 32A (specified at 20°C) |
| Impulse Voltage (Uimp) | 4kV |
| Insulation Voltage (Ui) | 230V single-phase, 500V three-phase |
| Frequency (fn) | 50Hz/60Hz |
| Rated Voltage | 1 Phase + N: 230V - 3 Phases + N: 400V |
| Voltage Tolerance (V) Independent of Vehicle Requirements | 195V - 265V |
| Integrated Protection System at Charging Station | Main fuse holder 50A |
| Integrated Protection System per Charging Point | Fuse holder 32A Gg RCD 63A 30mA Type B |
| Conditional Short-Circuit Current | 6000A IEC/EN 60898-1 10kA IEC/EN 60947-2 |
| Permissible Thermal Load during Short Circuit | 16 000 A²s |
| Connection to the Power Grid | Phase/Neutral, rigid cable, 2.5 to 35 mm², screw terminals H07 V R/U Earth, rigid cable, 2.5 to 35mm², screw terminals H07 V R/U |
| Charging Type | Mode 3 charging station with a locking system for Mode 3 |
| Vehicle Connector Socket Mode 3 | Type 2 3P+N (single-phase compatible) with control devices according to IEC 62191-1 and IEC 62196-2. Only use an approved plug with silver-plated contacts from the manufacturer. The use of extensions and adapters is prohibited. |
| Vehicle Connector Socket Mode 2 (65293704) | Type E/F for domestic use 2P+E (16A-250V) according to local regulations. Use of extensions and adapters prohibited. |
| Phase Rotation on Channel 2 (right side) | In the case of single-phase wiring (Ph+N) to the power source. Channel 2 cannot start charging until the phase rotation between the contactor and the socket is manually reversed. |
| AC Meter | MID certified, Class B according to EN 50470-1, -3 |
| Back-Office Protocol | OCPP 1.6 Json |
| Positioning | GPS |
| Ethernet Connectivity | RJ45 connection |
Environment
| Operating Temperature | -25°C / +50°C |
| Storage Temperature | -25°C / +80°C |
| Relative Humidity | 0 to 90% without condensation |
| Corrosivity Class | C4 according to IEC 9223 and IEC 12944 3C3/4C3 according to IEC 60721-3 |
| Protection Class | IP 54 (IEC 60529), IK 10 (EN 62262) Plugged in or not |
| Noise Level | < 40 dBA/1m |
| Product | IEC 61851-1, IEC TS 61439-7 (AEVCS) |
| Installation | Indoor or outdoor area, zone with restricted access, intended for use by normal persons (DBO), installation in a cabinet (wall mounting), pollution degree 3, TNS, TT, compatible earthing system. In case of an IT earthing system, this can be modified on site by adding an isolating transformer. |
| Electrical Protection | Class 1 IEC 61140 |
Electromagnetic Compatibility
| European Standards | Low Voltage Directive 2014 / 35EU / EMC Directive: 2014 / 30 / EU |
| Type of Radio Technology | GSM 2G/3G/4G, GPRS, RFID |
| Suitable Charging Cards | Mifare, Ntag and iCODE SLI Card |
