Ecotap Duo Wide Plus EV Charging Station
A brand of Legrand
Product Overview
Image: A white electric vehicle parked next to a tall, white EV charging station.
The Ecotap Duo Wide Plus is an electric vehicle charging station designed for efficient and reliable charging.
Specifications
General Characteristics
| Reference | 65458064 |
|---|---|
| Reference (Eichrecht) | 65458061 |
| Dimensions H x W x D (mm) | 1400 x 490 x 240 |
| Material | Steel 2.2 mm |
| Standard Colour | Body: RAL 6018 / Cover: RAL 9016 for 65458061, 65458064 |
| Steel Treatment | Anti-corrosion (KTL) and powder coating |
| Weight (kg) | 90kg |
| Number of charging points | 2 |
| Socket | Type 2 |
| Cable | Type 2 |
| Cable (Kabel) | Type 2 |
Electrical Characteristics
| Power per socket | 0 to 22kW |
|---|---|
| Operating Voltage (Ue) / Rated Current (In A) of charger | Single-phase wiring, phase + N 230V~ from 0 to 80A (determined at 20°C) Three-phase wiring, 3 phases + N 400V~ from 0 to 80A (determined at 20°C) |
| Operating Voltage (Ue) / Rated Current (In A) per charging point | Single-phase wiring, phase + N 230V~ from 0 to 32A (determined at 20°C) Three-phase wiring, 3 phases + N 400V~ from 0 to 32A (determined at 20°C) |
| Impulse Voltage (Uimp) | 4kV |
| Insulation Voltage (Ui) | 230V single-phase 500V three-phase |
| Frequency (fn) | 50Hz/60Hz |
| Rated Voltage | 1 phase + N: 230V – 3 phases + N: 400V |
| Voltage Tolerance (V) Independent of vehicle requirements | 195V - 265V |
| Integrated protection system on the charging station | Main blade fuse holder 50A |
| Integrated protection system per charging point | Fuse holder 32A Gg RCD 63A 30mA Type B |
| Conditional short-circuit current | 6000A IEC/EN 60898-1 10kA IEC/EN 60947-2 |
| Admissible thermal stress in case of short-circuit | 16,000 A²s |
| Connection to the grid | Phase/Neutral/Earth on screw terminals 2.5 to 35 mm² rigid H07 V R/U or flexible H07 V K with ferrule. Charging station permanently connected to the AC power grid. |
| Charging type | Mode 3 charging station equipped with a locking system for mode 3 |
| Vehicle Connection Mode 3 Connector | Type 2 3P+N (single-phase compatible) with pilots conforming to IEC 62191-1 and IEC 62196-2 standards. Use only a manufacturer-approved plug with silver-plated contacts. The use of extension cords and adapters is prohibited. |
| Vehicle Connection Mode 2 Connector (65293704) | Domestic Type E/F 2P+E (16A-250V) according to local regulations. The use of extension cords and adapters is prohibited. |
| Phase rotation on channel 2 (right side) | In the case of single-phase wiring (Ph+N) on the power supply. Channel 2 will not be able to start charging sessions until the phase rotation between the contactor and the socket is manually cancelled. |
| AC Meters | MID certified, class B according to EN 50470-1, -3 |
| Back office protocol | OCPP 1.6 Json |
| Positioning | GPS |
| Ethernet Connectivity | RJ45 Connector |
Environment
| Service Temperature | -25°C / +50°C |
|---|---|
| Storage Temperature | -25°C / +80°C |
| Relative Humidity | 0 to 90% without condensation |
| Corrosivity Class | C4 according to IEC 9223 and IEC 12944 3C3/4C3 according to IEC 60721-3 standard |
| Protection Index | IP 54 (IEC 60529), IK 10 (EN 62262) Connected or not |
| Noise Level | < 40 dBA at 1m |
Product Installation and Safety
| Installation | Indoor or outdoor, limited access area, intended for use by ordinary persons (DBO), cabinet (wall) mounting, pollution degree 3, TNS, TT, compatible earthing. In case of IT earthing, this can be locally modified by adding an isolation transformer. |
|---|---|
| Electrical Safety | Class 1 IEC 61140 |
Electromagnetic Compatibility
| European Standards | Low Voltage Directive 2014 / 35EU / EMC Directive: 2014/30/EU |
|---|---|
| Radio technology type | GSM 2G/3G/4G, GPRS, RFID |
| Compatible charging cards | Mifare, Ntag and iCODE SLI cards |
Company Information
Ecotap B.V.
Kruisbroeksestraat 23
5281 RV Boxtel
+31(0) 411 210 210
info@ecotap.nl
Website: www.ecotap.nl
