Ecotap Duo Wide Plus - Specifications
The Ecotap Duo Wide Plus is an advanced electric vehicle charging station designed for efficient and reliable charging. This document outlines its technical specifications.
General Characteristics
| Reference Number | 65458064 |
| Reference Number (Calibration) | 65458061 |
| Dimensions (H x W x D) (mm) | 1400 x 490 x 240 |
| Housing Material | Steel 2.2 mm |
| Standard Color | Body: RAL 6018 / Shield: RAL 9016 (for 65458061, 65458064) |
| Surface Treatment | Anti-corrosion (KTL) and powder coating |
| Weight (kg) | 90kg |
| Number of Charging Points | 2 |
| Socket | Type 2 |
| Cable | Type 2 |
| Cable | Type 2 |
Electrical Characteristics
| Output Power per Charging Point | Up to 22kW |
| Operating Voltage (Ue) / Rated Current (In A) for the Charger | Single-phase cabling, phase + N 230V~ from 0 to 80A (measured at 20°C) Three-phase cabling, 3 phases + N 400V~ from 0 to 80A (measured at 20°C) |
| Operating Voltage (Ue) / Rated Current (In A) per Charging Point | Single-phase cabling, phase + N 230V~ from 0 to 32A (measured at 20°C) Three-phase cabling, 3 phases + N 400V~ from 0 to 32A (measured at 20°C) |
| Nominal Voltage | 1 phase + N: 230V - 3 phases + N: 400V |
| Voltage Tolerance (V) regardless of vehicle requirements | 195V - 265V |
| Integrated Safety System on Charging Station | Fuse holder 50A |
| Integrated Safety System per Charging Point | Fuse holder 32A Gg, RCD 63A 30mA Type B |
| Conditional Short-Circuit Current | 6000A IEC/EN 60898-1, 10kA IEC/EN 60947-2 |
| Admissible Thermal Short-Circuit Current | 16 000 A²s |
| Connection to the Power Supply | Phase/Neutral, rigid cable, 2.5 to 35 mm², screw terminals HO7 V R/U Ground, rigid cable, 2.5 to 35 mm², screw terminals HO7 V R/U |
| Charging Type | Mode 3 charging terminal equipped with a locking system for Mode 3 |
| Vehicle Connection Mode 3 Connector | Type 2 3P+N (single-phase compatible) with pilots complying with IEC 62191-1 and IEC 62196-2. Only use a manufacturer-approved plug with silver-plated contacts. Use of extension cords and adapters is prohibited. |
| Vehicle Connection Mode 2 Connector (65293704) | Type E/F household 2P+E (16A-250V) depending on local regulations. Use of extension cords and adapters is prohibited. |
| Phase Rotation on Channel 2 (Right Side) | In the case of single-phase cabling (Ph+N) on the power source. Channel 2 cannot start charging sessions until the phase rotation between the contactor and the socket is manually corrected. |
| AC Meters | MID-certified, Class B according to EN 50470-1, -3 |
| Back Office Protocol | OCPP 1.6 Json |
| Positioning | GPS |
| Ethernet Connectivity | RJ45 connector |
Environmental Conditions
| Operating Temperature | -25°C / +50°C |
| Storage Temperature | -25°C / +80°C |
| Relative Humidity | 0 to 90% without condensation |
| Corrosion Class | C4 according to IEC 9223 and IEC 12944 3C3/4C3 according to IEC 60721-3 |
| Protection Class | IP 54 (IEC 60529), IK 10 (EN 62262) Connected or not |
| Noise Level | < 40 dBA / 1m |
| Product | IEC 61851-1, IEC TS 61439-7 (AEVCS) |
| Installation | Indoors or outdoors, restricted access zone, intended for use by ordinary persons (DBO), wall-mounted installation, pollution degree 3, TNS, TT, compatible earthing system. In an IT earthing system, this can be locally modified by adding an isolation transformer. |
| Electrical Safety | Class 1 IEC 61140 |
Electromagnetic Compatibility
| European Standards | Low Voltage Directive 2014 / 35EU / EMC Directive: 2014 / 30 / EU |
| Radio Technology Type | GSM 2G/3G/4G, GPRS, RFID |
| Suitable Charging Cards | Mifare, Ntag and iCODE SLI cards |
