User Manual SNZB-01P

Introduction

A small wireless button that can even fit in your pocket, with preset actions for click, double-click, and long-press to control multiple devices. Install it anywhere you want, stick and use it immediately. It can also be used in smart scenes with other smart devices to build your automated home.

• ? Multiple Button Actions to Trigger
• ? 5-year Battery Life
• ⚠️ Low Battery Notification
• ? Smart Scene

*The above features depend on the function of Zigbee gateway.

Specifications

Device Indicators and Buttons

1. LED Indicator:

• Flash slowly for 180 seconds: Device is in pairing mode.
• Keep on for 3s and then keep off: Pairing Successful
• Exit flashing slowly and keep off: Pairing Failed
• Flash once quickly: Click, Double click, Long press (After accessing Zigbee network)
• Flash once quickly: Not added to the gateway, short press the pairing button
• Flash twice quickly: Added to the gateway, short press the pairing button
• Flash slowly for 30 seconds: Abnormal communication

2. ON/OFF button

3. Pairing button:

• Press and hold for 5 seconds: Device enters the pairing mode (Pairing time 180 seconds).

Adding the Device

Download the eWeLink App & Add SONOFF Zigbee Gateway

Please download the "eWeLink" App from Google Play Store or Apple App Store.

[eWeLink App Search Icon] [eWeLink App Icon]

Scan QR Code to Add Device

1. Step 1: Take out the battery insulation sheet to power on the device. [Image Description: Hand pulling battery tab from device]
2. Step 2: Enter "Scan" on the eWeLink app. [Image Description: Smartphone screen showing 'Add Device' and 'Scan' button]
3. Step 3: Scan the QR code on the device. [Image Description: Smartphone scanning QR code on the device]
4. Step 4: Select "Add Device" on the app. [Image Description: Smartphone screen showing 'Add Device' button]
5. Step 5: Long press the pairing button for 5 seconds. The LED indicator flashes slowly for 180s. [Image Description: Hand pressing pairing button on device]
6. Step 6: Select Zigbee gateway. [Image Description: Smartphone screen showing gateway selection]
7. Step 7: Wait until the addition is done. [Image Description: Smartphone screen showing 'Connecting' and '1 device Found']

Matched Gateways

SONOFF ZBBridge, ZBBridge-P, ZBBridge-U, NSPanel PRO, iHost, ZBDongle-P, ZBDongle-E

Third-party compatible gateway models: SmartThings Hub V3, AeoTec Smart Home Hub V3

Effective Communication Distance Verification

Install the device in the desired place, then press the Pairing button on the device. The LED indicator flashes twice means the device and the device under the same Zigbee network (the router device or hub) are in the effective communication distance.

Installation

Fix the metal plate in a desired location, and then magnetically attach the device to the plate.

[Diagram: Metal plate being attached to a wall with adhesive tape, followed by the device magnetically attaching to the plate.]

*The equipment is only suitable for mounting at heights ≤ 2m.

Replace the Battery

Use a card ejector pin to press the buckle and use a coin or other tool to rotate the bottom cover, then pry open the bottom cover.

[Diagram: Steps for opening the device to replace the battery, showing the CR2477 battery.]

Factory Reset

Reset the device to factory settings by "Delete device" on the eWeLink App.

Compliance Information

FCC Compliance Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference, and
• (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• — Reorient or relocate the receiving antenna.
• — Increase the separation between the equipment and receiver.
• — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• — Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

ISED Notice

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

• (1) This device may not cause interference.
• (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003(B). This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

ISED Radiation Exposure Statement

This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.

Battery Safety Warnings

⚠️ Do not ingest battery, Chemical Burn Hazard.

• This product contains a coin/button cell battery.
• If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• KEEP new and used batteries OUT OF REACH of CHILDREN.
• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
• Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types).
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

EU Declaration of Conformity

Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type SNZB-01P is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://sonoff.tech/compliance/

For CE Frequency

• Operation Frequency Range: Zigbee: 2405~2480MHz
• EU Output Power: Zigbee: <10dBm

Warning

Under normal use conditions, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.

WEEE Disposal and Recycling Information

All products bearing the WEEE symbol ♻️ are waste electrical and electronic equipment which should not be mixed with unsorted household waste. Instead, hand over your waste equipment to a designated collection point for recycling, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about collection points.

UL 4200A Compliance Statement

WARNING:

• INGESTION HAZARD: This product contains a button cell or coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH of CHILDREN.
• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

[Icon Description: Warning symbol indicating coin battery, with size requirements.]

• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
• Even used batteries may cause severe injury or death.
• Call a local poison control center for treatment information.
• Compatible battery type: CR2477
• Nominal battery voltage: 3V===
• Non-rechargeable batteries are not to be recharged.
• Do not force discharge, recharge, disassemble, heat above 60°C or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
• Ensure the batteries are installed correctly according to polarity (+ and -).
• Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
• Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
• Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

Packaging Information

Manufacturer Information

Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.

Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China

ZIP code: 518000

Website: sonoff.tech

Service email: support@itead.cc

Made in: China

Recycling Information (France)

FR

This device, its accessories, and batteries are recyclable.

To be deposited in store ? OR To be deposited in recycling center ♻️

Collection points at www.quefairedemesdechets.fr

Prioritize repair or donation of your device! ?

[Logos: CE, 22 PAP, FC, WEEE symbol, recycling symbol, house symbol]