Sonoff SNZB-01P Smart Zigbee Switch
User Manual
Product Description
- LED Indicator (top, with a red light symbol)
- Power Button (center-right)
- Pairing Button (bottom-right)
LED Indicator Status
| Indicator Status | Description |
|---|---|
| Slowly blinking | Pairing Mode |
| Lights up for 3 seconds and then turns off | Successfully Paired |
| Stops blinking and turns off | Pairing Failed |
| Quick single blink | Click, double-click, hold (when accessing Zigbee network) |
| Quick single blink | Not added to gateway, press the pairing button. |
| Quick double flash | Added to gateway, press the pairing button. |
Product Features
A small wireless button that fits in your pocket, with pre-programmed actions for single-click, double-click, and long-press to control multiple devices. Install it anywhere, stick it on, and use it. It can also be used in smart scenes with other intelligent devices.
- [Finger pointing] Trigger multiple actions with button
- [Battery] Replaceable battery
- [Speech bubble] Low battery alert
- [Link] Smart scene
The above functions depend on the Zigbee gateway's functionality. Download the eWeLink app and add a SONOFF Zigbee gateway.
Logos for eWeLink and a generic 'e' symbol are present.
Powering On the Device
- Remove the battery insulation film and power on the device.
- Upon first power-on, the device will automatically enter pairing mode, and the LED indicator will start blinking slowly.
- If the device is not successfully paired with the Zigbee gateway within 3 minutes, the pairing mode will end. To re-enter pairing mode, press and hold the device's pairing button for 5 seconds until the LED indicator blinks slowly. (Indicated by a hand pressing a button for 5s).
- A battery (CR2450) must be inserted to power on the device.
Adding Device to Zigbee Bridge
On the main Zigbee gateway page in the eWeLink app, tap the 'Add' button for sub-devices and wait for the pairing process to complete.
- Screen showing 'Most ZB', 'Added:0', and a prompt 'No child device, please add.' with an 'Add' button.
- Screen showing 'Add device', 'Connecting', 'Keep the device within sufficient proximity to the hub.', a timer '135s', and 'Searching for device'.
- Screen showing 'Found 1 device'.
If device pairing fails, move the device closer to the Bridge and try again.
Verifying Effective Communication Coverage
Install the device in the desired location and then press the pairing button on the device. When the LED indicator blinks twice, it means the product and the device on the same Zigbee network (router or hub) are within effective range.
Installation
Attach the metal plate to the desired location and then attach the device to it.
- A wall with a piece of 3M adhesive tape.
- A metal mounting plate being attached to the wall.
- The circular device being attached to the metal plate.
Specifications
- Model: SNZB-01P
- Input: 3.0V
- Wireless Connection: Zigbee3.0
- Battery Model: CR2477
- Operating Temperature: -10°C-60°C
- Operating Humidity: 5-95% RH, non-condensing
- Enclosure Material: PC
- Dimensions: 45x45x17.7 mm
Factory Reset
The device can be reset to factory settings using the 'Remove device' option in the eWeLink app.
Battery Safety Warnings
Do not swallow batteries, risk of chemical burns. This product contains a battery. Swallowing batteries can cause severe internal burns in as little as 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you suspect batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention. Replacing the battery with an incorrect type may damage the protection (e.g., for some types of lithium batteries). Disposing of batteries in fire or a hot oven, mechanically crushing or cutting batteries may cause an explosion. Exposing a battery to extremely high ambient temperatures may cause an explosion or leakage of flammable liquid or gas. Exposing a battery to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas.
Simplified Declaration of Conformity
Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.
Address: 663, Bulong Rd, Shenzhen, Guangdong, China
Product: Smart Zigbee Switch
Model: SNZB-01P
The product complies with Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the approximation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/ES.
The Declaration of Conformity is available at: https://files.innpro.pl/SONOFF
Radio Frequency: 2405~2480MHz
Maximum Radio Frequency Power: ≤Max.
Logos present: SONOFF, Shenzhen Sonoff Technologies Co., Ltd. address, CE, FC, RoHS, WEEE (crossed-out bin with '22' and 'PAP' symbols).
Environmental Protection
Electronic waste marked in accordance with the European Union directive must not be disposed of with other municipal waste. It is subject to separate collection and recycling at designated locations. By ensuring its proper disposal, you prevent possible negative consequences for the environment and human health. The collection system for used equipment is in accordance with local environmental protection regulations for waste disposal. Detailed information on this topic can be obtained from the local authority, processing plant, or the store where the product was purchased. The product complies with the requirements of the so-called new approach directives of the European Union (EU) concerning safety, health, and the environment, which specify hazards that should be identified and eliminated.
This document is a translation of the original user manual issued by the manufacturer.
The product must be regularly maintained (cleaned) by the user or a specialized service center at the user's expense. If the user manual does not provide information on necessary cyclical maintenance or service operations, the physical condition of the product should be regularly assessed for deviations from a physically new product, at least once a week. If any deviation is detected or found, maintenance (cleaning) or service measures must be taken immediately. Failure to perform proper maintenance (cleaning) and failure to respond to a detected deviation may result in permanent damage to the product. The guarantor is not responsible for damages caused by negligence.
Warranty
The warranty is void in case of changes and/or modifications to the product. The manufacturer is not liable for damages resulting from improper use of this product.
Disposal
- Dispose of this product at an appropriate collection point.
- Do not dispose of this product with household waste.
- For more information, contact your retailer or local authorities responsible for waste management.
Documentation
This product has been manufactured and is supplied in compliance with all applicable regulations and directives in force in all Member States of the European Union. It also meets all relevant specifications and regulations in the country of sale. Official documentation can be obtained upon request. Official documentation includes (but is not limited to) the Declaration of Conformity, Material Safety Data Sheets, and product test reports.
Disclaimer
The design and specifications of the product are subject to change without prior notice. All logos and trade names are registered trademarks of their respective owners and are protected by law.
