Zebra SP72 Series Single-Plane Scanner
Accessory Guide
Mounting Brackets
Table Mount – SP72-V
- Allows the scanner to be mounted horizontally (i.e., tabletop) or vertically (i.e., wall).
- The scanner is locked in place and cannot be removed.
- Mounted with double-sided tape (tabletop) or screws (wall).
- Uses same screw holes as competitive table mounts for easy replacement.
- Not backward compatible with DS7708.
Part Number: BRKT-TM0072-04: Table Mount for SP72-V, Midnight Black
[Image: Two views of the Zebra SP72-V Table Mount accessory, showing the mount and its base.]
Riser Mount – SP72-V
- Allows the scanner to be mounted about 2 inches from the tabletop.
- Can be mounted horizontally (i.e., tabletop) or vertically (i.e., wall).
- The scanner can be tilted forward 15° (tabletop) or backward up to 45° (wall).
- Mounted with screws.
- Not backward compatible with DS7708.
- Uses same screw holes as competitive riser mounts for easy replacement.
Part Number: BRKT-RM0072-04: Riser Mount for SP72-V, Midnight Black
[Image: Zebra SP72-V Riser Mount components, including the base, scanner on base, and the riser itself.]
Bucket Mount – SP72-H
- Allows the scanner to be flush mounted (in-counter).
- Same hole opening dimension as competitors for easy replacement.
Part Number: BRKT-BM0072-00: Bucket Mount for SP72-H
[Image: Zebra SP72-H Bucket Mount, showing the metal bracket and the scanner installed flush in a surface.]
Replacement Platters
Stainless Steel/Glass Platter – SP72-H
- Replacement for damaged/lost platters.
- Interchangeable.
Part Numbers:
- MISC-SG0072: Sapphire Glass Platter for SP72-H
- MISC-DG0072: Diamond-like Glass Platter for SP72-H
[Image: Two Zebra SP72-H replacement platters, one appearing to be sapphire glass and the other diamond-like glass, both with stainless steel frames.]
Power Supplies and Line Cords
5V Power Supplies
Part Numbers:
- PWR-WUA5V4W0XX (where XX = US, 4C (EU, BR, CN, AU)): Level VI AC/DC Power Supply Wall Adapter, with Captive DC Cable and country specific adapter Clip. AC Input: 100-240V, 0.2A DC. Output: 5.2V, 1.1A, 5.7W
- PWR-WUA5V4W0WW: Power Supply: 5VDC, 850mA, Level VI Compliant
[Image: A Zebra 5V AC/DC Power Supply Wall Adapter.]
12V Power Supplies
Part Number: PWR-BGA12V50W0WW: Level VI AC/DC Power Supply (Brick). AC Input: 100-240V, 2.4A. DC Output: 12V, 4.16A, 50W. Requires: DC line cord and Country specific AC grounded Line Cord.
Line Cords:
- CBL-DC-376A1-01: DC Line Cord to PWRBGA12V50W0WW (straight connector)
- 23844-00-00R: AC Line Cord to PWRBGA12V50W0WW (US)
[Image: A Zebra 12V AC/DC Power Supply Brick.]
Cable Options
USB
[Image: USB Series A and Power Plus connectors for Zebra scanners.]
Main features:
- USB communication.
- Automatically detects the host.
- Powered from the host, including DS9908R.
- Straight or coiled cables available, as well as various cable lengths.
- Range of different host types cables available.
- Compatible with DS9808 USB cables (Shielded USB Cables are recommended for best ESD performance).
USB Cables:
- CBA-U21-S07ZBR: Shielded USB: Series A Connector, 7Ft. (2.1M), Straight, BC1.2
- CBA-U23-S07ZBR: Shielded USB: Power Plus Connector, 7Ft. (2.1M), Straight, 12V
RS-232
[Image: A DB9 connector, typically used for RS-232 serial communication.]
Main features:
- Serial communication.
- Automatically detects the host.
- External power supply not required, unless specified.
- Straight or coiled cables available, as well as various cable lengths.
- Range of different host types cables available.
- Compatible with DS9808 & DS9808R RS-232 Cables.
RS-232 Cables:
- CBA-R01-S07PBR: RS232: DB9F, 7Ft. (2M) ST, TXD-2, W/ TTL Current Limit Protection [Requires external 5V power supply]
- CBA-R37-C09ZBR: RS232: DB9F, 9Ft. (2.8M) CL, PWR Pin 9, W/TTL Current Limit Protection
- CBA-R08-S07ZBR: RS232: 7FT (2M), NIXDORF BEETLE- 5V Direct Power, W/ TTL Current Limit Protection
[Image: Diagram showing an RS-232 cable connecting to a power adapter.]
IBM (RS-485)
[Image: IBM connectors, likely for point-of-sale systems.]
Main features:
- IBM 4690 communication.
- Automatically detects the host, but does not choose a port address.
- External power supply not required.
IBM Cables:
- CBA-M61-S07ZAR: Assembly, Cable, Auto-Host detect – IBM: 468X/9X, 7FT(2M) Straight, Port 9B
