Zebra TC22 and TC27 Accessories Guide

This guide provides detailed information on accessories designed to enhance the functionality, durability, and productivity of the Zebra TC22 and TC27 mobile computers.

I. Accessories that POWER devices

1.1 Cradles

Single-slot cradles

Single-slot charger cradle

SKU#: CRD-TC2L-BS1CO-01

Charges one TC22 / TC27 device with a standard or extended capacity battery. Requires power supply SKU# PWR-WUA5V12W0XX and USB-C cable SKU# CBL-TC5X-USBC2A-01 (sold separately).

⚡ Charges standard capacity battery from 0 to 80% in less than 2 hours 20 minutes.
⚡ Charges extended capacity battery from 0 to 80% in less than 3 hours 10 minutes.
✔️ Compatible with TC22 / TC27 units with hand straps, trigger handle, or protective boot when shim is removed.

Single-slot USB / Ethernet charger cradle

SKU#: CRD-TC2L-SE1ET-01

Charges and syncs a single device via USB or connects to Ethernet. Requires power supply SKU# PWR-BGA12V50W0WW, DC cable SKU# CBL-DC-388A1-01, and country-specific AC line cord (sold separately). For USB sync, purchase USB cable SKU# 25-124330-01R. For Ethernet, purchase USB-to-Ethernet module SKU# MOD-MT2-EU1-01 with bracket SKU# BRKT-TC51-ENET1-02.

⚡ Charges standard capacity battery from 0 to 80% in less than 1 hour 20 minutes.
⚡ Charges extended capacity battery from 0 to 80% in less than 1 hour 50 minutes.
✔️ Compatible with TC22 / TC27 units with hand straps, trigger handle, or protective boot when shim is removed.

Single-slot device and battery charger cradle

SKU#: CRD-TC2L-BS11B-01

Charges a TC22 / TC27 device and its spare Li-Ion battery simultaneously. Requires power supply SKU# PWR-BGA12V50W0WW, DC cable SKU# CBL-DC-388A1-01, and country-specific AC line cord (sold separately).

⚡ Charges Standard battery in device from 0 to 80% in less than 1 hour 20 minutes.
⚡ Charges Extended battery in device from 0 to 80% in less than 1 hour 50 minutes.
✔️ Compatible with TC22 / TC27 units with hand strap, trigger handle, or protective boot when shim is removed.

Multi-slot cradles

Five-slot charger cradle

SKU#: CRD-TC2L-BS5CO-01

Charges up to five TC22 / TC27 devices. Can be rack-mounted using mounting bracket SKU# BRKT-SCRD-SMRK-01. Requires power supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, and country-specific AC line cord (sold separately).

⚡ Charges Standard Capacity battery from 0 to 80% in less than 1 hour 20 minutes.
⚡ Charges Extended Capacity battery from 0 to 80% in less than 1 hour 50 minutes.
✔️ Compatible with TC22 / TC27 units with hand straps, trigger handle, or protective boot when shim is removed.
?️ Can be rack-mounted in a standard 19-inch server rack via mounting bracket SKU# BRKT-SCRD-SMRK-01.

Five-slot charge / Ethernet cradle

SKU#: CRD-TC2L-SE5ET-01

Charges five devices and provides network speeds up to 1Gbps. Can be rack-mounted using mounting bracket SKU# BRKT-SCRD-SMRK-01. Requires power supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, and country-specific AC line cord (sold separately).

⚡ Charges Standard Capacity battery from 0 to 80% in less than 1 hour 20 minutes.
⚡ Charges Extended Capacity battery from 0 to 80% in less than 1 hour 50 minutes.
✔️ Compatible with TC22 / TC27 units with hand straps, trigger handle, or protective boot when shim is removed.
?️ Can be rack-mounted in a standard 19-inch server rack via mounting bracket SKU# BRKT-SCRD-SMRK-01.

Cradle cups

Device cradle cup replacement kit

SKU#: CRDCUP-TC2L1C-01 (Single), CRDCUP-TC2L5C-01 (5-pack)

Replacement cradle cups for TC22 / TC27 devices. The 5-pack allows for mixed device configurations in multi-slot cradles.

✅ Replaces existing cradle cups on ShareCradle bases.
✅ Allows for mixed device support (e.g., TC22/TC27 and TC5X devices).

Charge and communication device cradle cup replacement kit

SKU#: CRDCUP-TC2L1E-01 (Single), CRDCUP-TC2L5C-01 (5-pack)

Replacement cradle cups for TC22 / TC27 devices supporting charge and USB/Ethernet connections. The 5-pack allows for mixed device configurations.

✅ Replaces existing cradle cups on ShareCradle bases.
✅ Allows for mixed device support (e.g., TC22/TC27 and TC5X devices).

Mounting options for chargers

Rack mounting for space optimization

Optimize space by mounting five-slot chargers for TC22 / TC27 on a standard 19-inch server rack.

⭐ Ideal for customers with multiple devices per location.
✔️ Compatible with all five-slot chargers for TC22 / TC27.

Mounting bracket

SKU#: BRKT-SCRD-SMRK-01

Bracket to attach five-slot TC22 / TC27 cradles to a wall or mount on a 19-inch server rack.

✅ Offers cable routing slots and a removable tray for power supply concealment.
✅ Adjustable orientations: -25° angle for high-density (five-slot chargers). - Horizontal (single-slot or four-slot spare Li-ion charger).
✅ Can mount up to four 4-slot spare battery chargers.
✅ Use for wall mounting or with standard 19-inch server racks for density and space saving.

1.2 Batteries

Spare Li-ion batteries

Standard Li-ion Bluetooth Battery with PowerPrecision

SKU#: BTRY-TC2L-2XMAXB-01

Standard capacity 3,800mAh PowerPrecision Li-Ion Battery with BLE Beacon. Features premium-grade battery cells for longer lifecycle and Zebra Guardian for location tracking even when powered off. Requires Zebra Device Tracker licenses (1-year SKU# SW-BLE-DTSP-1YR or 3-years SKU# SW-BLE-DT-SP-3YR, sold separately).

? 3,800mAh capacity.
? Includes BLE beacon for device location.
?️ Premium-grade battery cells.

Standard Li-ion Battery with PowerPrecision

SKU#: BTRY-TC2L-2XMAXX-01

Standard capacity 3,800 mAh PowerPrecision Li-ion Battery. Features premium-grade battery cells for longer lifecycle.

? 3,800mAh capacity.
?️ Premium-grade battery cells.

Extended PowerPrecision Li-ion Battery

SKU#: BTRY-TC2L-3XMAXX-01

Extended capacity 5,200 mAh PowerPrecision Li-ion battery. Features premium-grade battery cells for longer lifecycle.

? 5,200mAh capacity.
?️ Premium-grade battery cells.

1.3 Spare battery chargers

Battery Charger

SKU#: SAC-TC2L-4SCHG-01

Charges any four Li-ion batteries. Can be used standalone or up to 4 chargers can be mounted on Mounting Bracket SKU# BRKT-SCRD-SMRK-01. Requires Power Supply SKU# PWR-BGA12V50W0WW, DC Cable SKU# CBL-DC-388A1-01, and Country-specific AC Line cord (sold separately).

⚡ Charges Standard Capacity battery from 0 to 90% in less than 3 hours.
⚡ Charges Extended Capacity battery from 0 to 90% in less than 4 hours.
⚙️ Can be used standalone or mounted on SKU# BRKT-SCRD-SMRK-01.

Battery charger replacement kit

SKU#: CRDCUP-TC2L4B-01

Four-slot battery charger replacement cup. Used to replace legacy TC21 / TC26 series 4-slot Battery Charger cups on ShareCradle bases when migrating to TC22 / TC27. Only one cup can be installed on a multi-slot ShareCradle base.

✅ Replaces legacy TC21/TC26 4-slot battery charger cups.
✅ For use on ShareCradle bases.

1.4 Power supply, cables, and adapters

Power supply and cable matrix

The following matrix indicates required power supplies and cables for various cradles and devices. All items are sold separately.

Device/Cradle	Power Supply SKU	DC Cable SKU	AC Line Cord SKU	Notes
Single-slot charger cradle (CRD-TC2L-BS1CO-01)	PWR-WUA5V12W0XX	N/A (USB-C cable required)	Country-specific	Requires USB-C cable SKU# CBL-TC5X-USBC2A-01.
Single-slot USB/Ethernet cradle (CRD-TC2L-SE1ET-01)	PWR-BGA12V50W0WW	CBL-DC-388A1-01	Country-specific	For USB sync: SKU# 25-124330-01R. For Ethernet: SKU# MOD-MT2-EU1-01 + BRKT-TC51-ENET1-02.
Single-slot device/battery cradle (CRD-TC2L-BS11B-01)	PWR-BGA12V50W0WW	CBL-DC-388A1-01	Country-specific
Five-slot charger cradle (CRD-TC2L-BS5CO-01)	PWR-BGA12V108W0WW	CBL-DC-381A1-01	Country-specific
Five-slot charge/Ethernet cradle (CRD-TC2L-SE5ET-01)	PWR-BGA12V108W0WW	CBL-DC-381A1-01	Country-specific
Spare battery charger (SAC-TC2L-4SCHG-01)	PWR-BGA12V50W0WW	CBL-DC-388A1-01	Country-specific
Workstation Connect Cradle (CRD-TC2L-1SNWS-01)	PWR-BGA12V50W0WW	CBL-DC-388A2-01	Country-specific	Requires AC line cord.
Point of Sale Cradle (CRD-TC2L-1SNHP-01)	PWR-BGA24V150W1WW	N/A	Country-specific	Requires AC line cord.

Country-specific AC line cords: grounded, 3-prong

Various grounded 3-prong AC line cords are available for different regions.

SKU#	Country / region	Note
50-16000-678R	US
50-16000-221R	GB
50-16000-727R	AU
50-16000-680R	CN
50-16000-217R	EU
50-16000-218R	KR
50-16000-219R	BR
50-16000-257R
50-16000-220R
50-16000-671R
50-16000-669R

Country-specific AC line cords: ungrounded, 2-prong

Various ungrounded 2-prong AC line cords are available for different regions.

SKU#	Country / region	Note
50-16000-182R
50-16000-255R
50-16000-670R

II. Accessories that ENABLE productivity solutions

2.1 Headsets

Wired headsets for Workcloud Sync

SKU#: HDST-USBC-PTT1-01

PTT headset with USB-C connector for Push-To-Talk (PTT) applications. Features volume controls and PTT button. Compatible with PTT Express/PTT Pro. Mono headset with microphone. Rotating earpiece for right or left ear. Includes clip for attaching PTT button to clothing.

Wired headsets for Workcloud Sync

SKU#: HDST-35MM-PTVP-02

PTT and VoIP headset with 3.5mm standard jack for Push-To-Talk (PTT) and VoIP telephony. Compatible with PTT Express/PTT Pro. Mono headset with microphone. Rotating earpiece for right or left ear. Includes clip for attaching PTT button to clothing. Requires adapter SKU# ADP-USBC-35MM1-01.

Wired headsets for voice-directed picking

HS2100 rugged wired headset

Corded HD voice headset designed for demanding industrial environments. Dustproof, spray proof, and waterproof. Features noise cancellation for superior voice experience and a swiveling boom that mutes the microphone. Feather-light for comfort.

SKU#: HS2100-OTH, HS2100-BTN-L, HS2100-OTH-SB, HS2100-BTN-LSB
Description: Rugged Wired Headset (Over-The-Head or Behind-the-neck headband options with standard or shortened boom modules).
Compatibility: Can be used with TC22/TC27 devices with adapters SKU# CBL-HS2100-3MS1-01 and SKU# ADP-USBC-35MM1-01.

Wireless headsets for voice-directed picking

HS3100 rugged Bluetooth headset

Bluetooth headset optimized for voice-directed picking applications. Features noise cancellation, on-the-fly battery swapping without losing connection, and tap-to-pair simplicity using NFC. Offers 15 hours of battery power.

SKU#: HS3100-OTH, HS3100-BTN-L, HS3100-OTH-SB, HS3100-BTN-LSB, HS3100-SBOOM-01
Description: Bluetooth Headset (Over-The-Head or Behind-the-neck headband options with standard or shortened boom modules).

2.2 Cables and adaptors

Cigarette lighter adapter plug

SKU#: CHG-AUTO-USB1-01

USB cigarette lighter adapter plug with two USB-A ports for in-vehicle charging. Provides higher current (5V, 2.5A) for faster charging. Used with USB C Cable SKU# CBL-TC5X-USBC2A-01 (sold separately).

HS2100 Standard cable

SKU#: CBL-HS2100-3MS1-01

Standard cable for HS2100 headset with a 3.5mm jack. Features a 43-inch (1.1 meter) length, rugged connectors, and includes one clothing clip. Requires SKU# ADP-USBC-35MM1-01 for use with TC22/TC27.

Adapter cable

SKU#: ADP-USBC-35MM1-01

USB-C to 3.5mm adapter cable, approximately 2.5 feet (78 cm) long. Allows headsets with a 3.5mm jack to connect to TC22/TC27. Provides push-to-talk (PTT) button and volume up/down buttons. Features a clip for cable management.

Snap-On USB Charge-Only Cable Adapter

SKU#: ADPTR-TC2L-USBC-01

Connects to charge contacts on the bottom of the device for charging only (no USB communication). Compatible with devices using rugged boots by removing the shim. Cable length is 7 inches (17.78 cm).

2.3 Wearable mounts and other accessories

Arm / wrist mounts

Arm mount with medium size length strap

SKU#: SG-TC2L-ARMNT-01

Arm mount with a medium (30cm / 12 inches) Velcro wrist strap and comfort pad. Enables hands-free operation and can be used with ring scanners. Not compatible with Rugged Boot. This accessory is consumable.

Arm mount with large size length strap

SKU#: SG-TC2L-ARMNT-02

Arm mount with a large (33cm / 13 inches) Velcro wrist strap and comfort pad. Enables hands-free operation and can be used with ring scanners. Not compatible with Rugged Boot. This accessory is consumable.

Arm mount with extended length strap

SKU#: SG-TC2L-WMADP1-02

Wrist mount with an extended BOA dial-to-fit strap (adjustable 164 to 265mm / 6.5 to 10.5 inches). Features a swivel design for portrait/landscape viewing and a Velcro-free, wipeable material. Not compatible with Rugged Boot. Includes carrier, comfort pad, and medium/large sized wrist strap. This accessory is consumable.

Replacement straps and arm sleeves

BOA Replacement wrist strap

SKU#: SG-NGWT-WSTPST-01 (Standard), SG-NGWT-WSTPLN-01 (Extended), SG-NGWT-WSTPXL-01 (Extra-large)

Replacement wrist straps for BOA dial-to-fit systems, available in standard (128-191mm), extended (164-265mm), and extra-large (218-375mm) sizes. These accessories are consumable.

Arm sleeve

SKU#: SG-WT4027050-01R

Pack of 5 arm sleeves. Worn under wrist mount straps for comfort, sweat-wicking, and slip resistance when wearing short sleeves. One size fits all. Washable. This accessory is consumable.

Replacement straps, hand strap, and comfort pad

Medium Velcro Replacement Strap

SKU#: SG-TC2L-ARMSTRAP-01

Replacement arm strap, size medium (300mm / 12''). Replaces the strap included with SKU# SG-TC2L-ARMNT-01. This accessory is consumable.

Large Velcro Replacement Strap

SKU#: SG-TC2L-ARMSTRAP-02

Replacement arm strap, size large (330mm / 13''). Replaces the strap included with SKU# SG-TC2L-ARMNT-02. This accessory is consumable.

Hand strap

SKU#: SG-TC2L-HSTRP1-01

Hand strap that attaches directly to the device, allowing it to be easily held in the palm. Compatible with the rugged boot installed. This accessory is consumable.

Replacement Comfort Pad

SKU#: SG-TC2L-CMPD-01

Replacement comfort pad for arm mounts. Made of soft rubber, easily removable and hygienic. This accessory is consumable.

Stylus and tether

Stylus

SKU#: SG-STYLUS-TCX-MTL-03

Pack of 3 fiber-tipped styluses made from stainless steel/brass with a micro-knit, hybrid-mesh fiber tip. 5" length. Compatible with all capacitive touch screen devices. Can be tethered using SKU# SG-TC5NGTC7NG-TETHR-03. This accessory is consumable.

Stylus tether

SKU#: SG-TC5NGTC7NG-TETHR-03

Stylus tether that attaches to the device tower bar to prevent loss of stylus. Recommended for use with the fiber-tipped stylus. This accessory is consumable.

Trigger handles and accessories

Electronic trigger handle

SKU#: TRG-TC2L-SNP1-01

Pistol-grip trigger handle that uses electrical trigger via contacts on the back of the TC22 / TC27. Ideal for scan-intensive operations. Requires rugged boot SKU# SG-TC2L-BOOT-01. Does not block access to the rear-facing camera and flash. Compatible with standard and extended capacity batteries. Not compatible with Hand Strap or Wrist Strap.

Trigger handle strap

SKU#: 50-12500-066

Strap that attaches to the bottom of the Snap-on Trigger Handle (SKU# TRG-TC2L-SNP1-01). This accessory is consumable.

III. Accessories that PROTECT devices

3.1 Soft holsters, rugged boots, and screen protectors

Rugged boot

SKU#: SG-TC2L-BOOT-01

Rugged protective boot that increases the device's drop specification to 5 ft. (1.5 m) onto concrete. Compatible with Standard or Extended Capacity batteries and the Hand Strap. This accessory is consumable.

Screen protector

SKU#: SG-TC2L-SCRNPT1-01

Tempered glass screen protector. Includes alcohol wipes, cleaning cloth, and installation instructions. This accessory is consumable.

Soft holster

SKU#: SG-TC2L-HLSTR1-01

Vertical orientation soft holster with an open bucket design to accommodate the TC22 / TC27 with the optional trigger handle SKU# TRG-TC2L-SNP1-01. Compatible with rugged boot SKU# SG-TC2L-BOOT-01 and hand strap SKU# SG-TC2L-HSTRP1-01. Features an opening at the bottom for drainage and audio routing. Non-rotating for durability. Compatible with Standard or Extended Capacity batteries. This accessory is consumable.

IV. Workstation Connect Cradle

TC22 and TC27 Connect Cradle

Introducing the new Connect Cradles (Workstation and Point of Sale) for TC22 and T27 mobile computers. These accessories allow the TC22 and TC27 mobile computer to connect to multiple purpose-built peripherals and enable Zebra Workstation Connect on an external monitor.

Connect Cradles

Workstation Cradle SKU#: CRD-TC2L-1SNWS-01

Allows users to use the TC22 and TC27 device as a workstation or kiosk. Includes HDMI, Ethernet, USB-A (x4) ports, shims, and 3.5mm headset jack. Power supply, DC line cord, and AC line cord are sold separately.

Point of Sale Cradle SKU#: CRD-TC2L-1SNHP-01

Allows users to use the TC22 and TC27 devices as a Point of Sale terminal. Includes HDMI, Ethernet, USB-A (x3), 24V Powered USB (x1), 12V Powered USB (x2) ports, shims, and 3.5mm headset jack. Power supply and AC line cord are sold separately.

Power Supply & DC Line Cord for Workstation Connect Cradle

Power Supply SKU#: PWR-BGA12V50W0WW

100-240 VAC, 12VDC, 4.16A power supply.

DC Line Cord SKU#: CBL-DC-388A2-01

12 VDC, 4.16A, 1.8m length DC line cord for the above power supply. Requires a country-specific AC grounded line cord.

Power Supply for Point-of-Sale Cradle

SKU#: PWR-BGA24V150W1WW

Level VI AC/DC Power Supply Brick. AC Input: 100-240V, 2.0A. DC Output: 24V, 6.25A, 150W. Requires a country-specific AC grounded line cord.

V. Third Party Accessories for TC22/27

Note: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers. Zebra's Limited Warranty does not apply to non-Zebra branded products. Please contact the manufacturer directly for technical support and customer service.

Purpose-Built Mounts For Zebra TC22/TC27 (ProClip)

ProClip cradles offer easy one-handed docking, tilt-swivel viewing, heavy-duty construction, and custom designs.

Part #	Description
3PTY-PCLIP-712348	Charging Cradle with Cigarette Lighter Plug for Zebra TC22 / TC27 with Rugged Boot
3PTY-PCLIP-712347	Charging Cradle with Cigarette Lighter Plug for Zebra TC22 / 27 (Bare Device)
3PTY-PCLIP-713347	Charging Cradle with Hard-Wired Power Supply for Zebra TC22 / TC27 (Bare Device)
3PTY-PCLIP-713348	Charging Cradle with Hard-Wired Power Supply for Zebra TC22 / TC27 with Rugged Boot
3PTY-PCLIP-711348	Non-Charging Cradle with Tilt-Swivel for Zebra TC22 / 27 with Rugged Boot
3PTY-PCLIP-711347	Non-Charging Cradle with Tilt-Swivel for Zebra TC22 / 27 (Bare Device)

Gamber-Johnson ZEBRA TC22/TC27 Cradles & Mounting Accessories

ZEBRA TC22/TC27 CRADLE

SKU#: 3PTY-GJ-7160-1856

Cradle compatible with Zebra TC22/TC27 Handheld (requires Zebra rugged boot) and accommodates the Zebra TC22/TC27 hand strap. Features adjustable cable restraint. Attaches to Gamber-Johnson mounting solutions using the AMPS hole pattern.

ZEBRA TC22/TC27 CRADLE W/ ZIRKONA MEDIUM JOINER MOUNT

SKU#: 3PTY-GJ-7170-1016

Combines the Zebra TC22/TC27 cradle with a Zirkona Medium Joiner for a secure mounting solution. Designed for lightweight mounting with AMPS hole pattern. Features quick adjust handle and Zirkona Medium Joiner for all axes range of motion. All metal construction.

ZEBRA TC22/TC27 CRADLE W/ ZIRKONA MEDIUM JOINER + SUCTION CUP MOUNT

SKU#: 3PTY-GJ-7170-1017

Includes the Zebra TC22/TC27 cradle, Zirkona medium joiner, and a small suction cup mount. Offers a reliable and secure mounting solution with easy adjustment and all axes range of motion. Small suction cup footprint (3.5 inches).

MOBILIS® Accessories for TC22 - TC27

RUGGED BOOT ZEBRA TC22 - TC27

SKU#: 3PTY-MOB-065022 (Case only)

MOBILIS® rugged boot designed for intensive use, offering protection against drops and shocks. Features MILITARY STANDARD compliance (40X), drop resistance up to 1000 drops from 1.50m/5ft, AIRCELL SYSTEM for shock absorption, responsive buttons, and advanced raised edges to protect screen and camera lens. Compatible with ZEBRA charging stations and extended batteries. Hand strap ready and hot-swap battery compatible. Case made with 30% recycled material & 100% recyclable.

Compatibility:

Zebra charging stations: CRD-TC2L-BS1CO-01 / CRD-TC2L-BS11B-01 / CRD-TC2L-SE1ET-01
Zebra multiple charging stations: CRD-TC2L-SE5ET-01 / CRD-TC2L-BS5CO-01
Zebra extended battery: BTRY-TC2L-3XMAXX-01

Features:

?️ MILITARY STANDARD 40X
? Up to 1000 DROPS from 1.50m/5ft
? AIRCELL SYSTEM
? RESPONSIVES BUTTONS
⬆️ ADVANCED RAISED EDGES
?️ HAND STRAP READY
? HOT SWAP BATTERY COMPATIBLE
? ECO-CONCEPTION (30% recycled material, 100% recyclable)

PROTECH RANGE FOR TC22 - TC27

SKU#: 3PTY-MOB-052057 (10'' Case + handstrap), 3PTY-MOB-065030 (Trigger compatible), 3PTY-MOB-052062 (Yellow case + hand strap), 3PTY-MOB-052063 (Green case + hand strap), 3PTY-MOB-052064 (Orange case + hand strap)

ADDITIONAL PRODUCTS FOR TC22 - TC27

SCREEN PROTECTOR SKU#: 3PTY-MOB-036302
HAND STRAP SKU#: 3PTY-MOB-001367
HOLSTER M SKU#: 3PTY-MOB-031002
SHOULDER STRAP SKU#: 3PTY-MOB-001084
STYLUS: PACK OF 10 CAPACITIVE STYLUS WITH SPIRAL CORD SKU#: 3PTY-MOB-001054
UNIVERSAL WRIST MOUNT: ARMBAND 5-7'' - HHD SKU#: 3PTY-MOB-030004

BOOST YOUR BRAND VISIBILITY !

Customize your protective boots with your color and logo.

LEARN MORE, CONTACT US!

CONTACT: lmebrouki@mobiliscase.com | +33 682 005 064 | datacapture.mobiliscase.com

	Zebra FR55 Accessories Guide Explore the comprehensive range of accessories for the Zebra FR55 mobile computer, designed to enhance productivity and protection for first responders. This guide details cradles, batteries, chargers, headsets, mounts, and protective gear.
	Zebra TC5X-HC Healthcare Mobile Computer Accessories and Configuration Guide Comprehensive guide to Zebra TC5X-HC healthcare mobile computer accessories, including cradles, chargers, batteries, holsters, styluses, and cables. Learn about configuration options and ecosystem for healthcare environments.
	Zebra WS501 Accessories Guide: Enhance Hands-Free Productivity Comprehensive guide to Zebra WS501 accessories, including charging cradles, batteries, power supplies, cables, and wearable mounts designed to increase productivity through hands-free operation.
	Zebra RS5100 Ring Scanner Accessories Guide \| Batteries, Chargers, Triggers Explore the comprehensive range of accessories for the Zebra RS5100 Ring Scanner, including batteries, charging cradles, power supplies, and various trigger and hand mount options.
	Zebra ET40 and ET45 Rugged Tablets: Comprehensive Accessories Guide Explore the full range of accessories for Zebra ET40 and ET45 rugged tablets, including power solutions, protective gear, productivity enhancers, and third-party options. This guide details chargers, cradles, expansion backs, power packs, rugged boots, straps, stands, styluses, headsets, and mounting solutions.
	Zebra ET40 and ET45 Accessories Guide Explore the comprehensive accessories guide for Zebra ET40 and ET45 rugged tablets. Discover a wide range of products designed to enhance power, protection, and productivity, including chargers, cradles, rugged boots, straps, and more.
	Zebra MC3300ax Configuration and Accessories Guide This guide provides detailed information on configuring the Zebra MC3300ax mobile computer and lists compatible accessories, including cradles, batteries, chargers, soft goods, and country-specific power options.
	Zebra ET60 and ET65 Rugged Android Tablet Accessories Guide A comprehensive guide to accessories for Zebra's ET60 and ET65 rugged Android business tablets, detailing vehicle docks, power supplies, mounts, keyboards, styluses, straps, and stands to enhance productivity and usability in various environments.