DS55 and DS55 for Labs Fixed Mount Scanners

Customize Your Solution With A Full Range Of Accessories

Zebra offers a choice of power supplies, battery packs, capacitors, USB adapters, mounts, and holsters to fit every barcode scanning need. Enhance productivity for your workforce with accessories designed to complement and enhance scanner operation. Part numbers may vary by region.

[Image: A diverse collection of Zebra barcode scanning accessories, including handheld scanners, fixed mount scanners, and power supplies, are arranged in a circular display under a blue arc.]

Mounting Accessories

3-1 Multi-Mount Bracket

• Mount can be used as:
• Presentation Stand
• PC Monitor/Display Mount
• Wall Mount

The magnetic post holds the scanner in place while allowing it to:

• swivel freely either left or right
• lift off and on the mounting post

Part Number: BRKT-MM0055C-04 (3-1 Multi-Mount, Black)

[Image: A black 3-in-1 Multi-Mount bracket is shown with a Zebra DS55 scanner attached, highlighting its adjustable arm and mounting base.]

Stands

Gooseneck Stand

• Standalone or mounted with screws
• The scanner can be removed from the stand.

Part Numbers:

• STND-GS0055C-04 (Gooseneck Stand Black)
• STND-GS0055C-0W (Gooseneck Stand White)

[Image: Two Gooseneck Stands are displayed: one black and one white. Each stand features a flexible gooseneck arm holding a Zebra DS55 scanner.]

Mounting Accessories

DS457 20° Wall/Counter Mounting Bracket (backwards compatible)

• Can be used with DS55
• Allows the scanner to be mounted horizontally (i.e., tabletop) or vertically (i.e., wall).
• The scanner can be rotated and slid in and out of the bracket.

Part Number: KT-145344-01 (20° Wall/Counter Mounting Bracket, Black)

DS457 Adjustable Mounting Bracket (backwards compatible)

• Can be used with DS55
• Allows the scanner to be mounted horizontally (i.e., tabletop) or vertically (i.e., wall).
• The scanner is “locked” and cannot be removed from the bracket.
• DS457 applications must also use Adapter Plate Kit - KT-152342-01

Part Numbers:

• KT-65578-01R (Adjustable Mounting Bracket)
• KT-152342-01 (Locking Mount - Plate for adapting DS457 to fit into holes for MS320x)

[Image: Several mounting accessories for DS457 scanners are pictured. This includes a black corner mounting bracket, a black adjustable mounting bracket with a scanner, and a separate adapter plate kit.]

Stands

DS457 Gooseneck Stand (backwards compatible)

• Can be used with DS55
• Standalone or mounted with screws
• The scanner is “locked” and cannot be removed from the stand.

Part Number: 20-60136-02R (Gooseneck Stand Black)

[Image: Three stands are shown. The first two feature a central pole with a base, while the third is a gooseneck stand holding a Zebra scanner.]

Cables

Power Supplies