Zebra WS501 Accessories Guide

Increasing productivity through handsfree operation

Revised August 2025

WS501 Scan Assembly
Accessories that POWER a WS501
1. Chargers
  1. WS501 Single Charging Cradles
  2. WS501 Multi-Slot Device Cradle
  3. WS501 Multi-Slot Ethernet Cradles
  4. Spare Battery Chargers
  5. Multi-Slot Battery Chargers
2. Batteries
  1. Spare Li-ion batteries
3. Power supply, cables, and adapters
  1. WS501 Charge Cable
  2. Power supply and cable matrix
Accessories that ENABLE productivity solutions
1. Wearable mounts
  1. Two Finger Mount
  2. Back of Hand Mount
  3. Replacement mount accessories matrix

I. WS501 Scan Assembly

Deflector for impact protection

Comfort Pad

Finger Strap

Finger Pad

WS501 Core with two-inch color AMOLED touch display and SE4770 scan engine

Battery 1300mAh

Replaceable Protective Shell with two programmable buttons

Scan Trigger: replaceable, remove and rotate trigger for left/right hand use

II. Accessories that POWER a WS501

1 Chargers

WS501 Scan, Two Slot Device Cradle

SKU# CRD-WS5X-2SCV-01

Two slot charge-only cradle, charges two WS501 Scan devices. LED near the top of the WS501 display indicates charge status of each device. “Stadium" positioning enables viewability of the display on the rear device while a device is placed in the front slot.

Sold separately: Power supply SKU# PWR-BGA12V50W0WW, DC cable SKU# CBL-DC-388A1-01, and Country-specific AC line cord SKU# 23844-00-00R

WS501 Scan, 10 Slot Device Cradle

SKU# CRD-WS5X-10SCV-01

Ten slot charge-only cradle, charges ten WS501 Scan devices. LED near the top of the WS501 display indicate charge status of each device.

Sold separately: Power Supply SKU# PWR-BGA12V108W0WW, DC Line Cord SKU# CBL-DC-381A1-01, Country Specific 3 wire AC Line Cord SKU# 23844-00-00R, and Rack/Wall Mounting bracket for multi-slot cradles SKU# BRKT-SCRD-SMRK-01.

WS501 Scan, 5 Slot Ethernet Cradle with Spare Battery Charger

SKU# CRD-WS5X-5SECV-01

WS501 Scan Five Slot Ethernet Cradle with Spare Battery Charger, charges 5 WS501 Scan devices and 5 spare 1300mAh batteries. LED near the top of the WS501 display indicate charge status of each device. LEDs on the cradle indicate charge status of each battery.

2 Batteries

Spare Li-ion batteries

WS501 Scan, Spare 1300mAh Li-Ion Battery

SKU# BTRY-WS5X-13MA-01

PowerPrecision Spare Lithium-Ion battery, 1300mAh, for WS501 Scan

3 Power supply, cables, and adapters

WS501 Charge Cable

SKU# CBL-WS5X-USBA-01

WS501 charge cable with Type A male connector. Cable length 4 feet / 1.2 meters

Sold separately: Power Supply SKU# PWR-WUA5V12W0XX, USB-C to USB-A Cable SKU# CBL-TC5X-USBC2A-01, and Micro-USB to USB-A Cable SKU# 25-MCXUSB-01R.

Power supply and cable matrix

SKU#	Description	Note
PWR-WUA5V12W0XX	USB Power Supply for WS501 Charging cable.
PWR-BGA12V50W0WW	Level VI AC/DC Power Supply (Brick, replacement for PWRS-14000-148R) AC Input: 100-240V, 2.4A DC Output: 12V, 4.16A, 50W Requires: DC line cord and Country specific grounded AC line cord.	Sold separately. Use as: • Power supply for Four Slot Spare Battery Chargers and Two Slot Device Cradle SKU# SAC-WS5X-4S13-01, SAC-WS5X-4S8-01, SAC-WS5X-4S24-01, CRD-WS5X-2SCV-01, CRD-WS5X-2SWR-01, CRD-WS5X-2SRD-01) • AC Line Cord between power supply and outlet • DC Line Cord between power supply and charger
23844-00-00R	US AC line cord, 7.5 feet long, grounded, three wire for power supplies.
CBL-DC-388A1-01	DC Line Cord for running the single slot cradles or battery chargers from a single Level VI power supply PWR-BGA12V50W0WW, Level VI replacement for PWRS-14000-148R.
PWR-BGA12V108W0WW	Level VI AC/DC Power Supply (Brick, Replacement for PWRS-14000-241R) AC Input: 100-240V, 2.8A DC Output: 12V, 9A, 108W Requires: DC line cord and Country specific grounded AC line cord.	Sold separately. Use as: • Power supply for 10-slot device cradle, 20-slot spare battery charger, and 5 slot ethernet cradle SKU# CRD-WS5X-10SCV-01, CRD-WS5X-10SWR-01, CRD-WS5X-10SRD-01, SAC-WS5X-20S13-01, SAC-WS5X-20S8-01, SAC-WS5X-20S24-01, CRD-WS5X-5SECV-01, CRD-WS5X-5SEWR-01, CRD-WS5X-5SERD-01 • DC Line Cord between power supply and charger • AC Line Cord between power supply and charger • Rack/Wall Mounting bracket for 10-slot device cradle, 20-slot spare battery charger, and 5 slot ethernet cradle
CBL-DC-381A1-01	DC Line Cord for running multi-slot cradles from a single Level VI power supply PWR-BGA12V108W0WW, Level VI replacement for PWRS-14000-241R
23844-00-00R	US AC line cord, 7.5 feet long, grounded, three wire for power supplies.
BRKT-SCRD-SMRK-01	Rack/Wall Mounting bracket for multi-slot cradles.

III. Accessories that enable productivity solutions

4 Wearable Mounts

Two Finger Mount

SKU# SG-WS5X-TRGA-01

WS501 Two Finger Trigger Mount

WS501 Scan replacement trigger mount.

• Includes hand strap and small finger strap

Back of Hand Mount

SKU# SG-WS5X-BHMT-02

WS501 Scan Back of Hand Mount

• Includes mounting plate and trigger assembly. Requires separate purchase of hand wrap.

Replacement mount accessories matrix

SKU#	Description	Note
SG-WS5X-STRP-10	Replacement finger strap for WS501 Scan, 10 pack
SG-WS5X-SHLCS-01	Replacement protective shell for WS501 Scan. Two input buttons.
SG-WS5X-DFLTC-01	Replacement protective deflector for WS501 Scan. Includes mounting screws.
SG-WS5X-SCRNP1-01	Replacement screen protector for WS501 display.
SG-WS5X-CMPDC-01	Replacement Comfort Pad for WS501 Finger Mount.
SG-WEAR-HNWPXX-02	Spare Hand Wrap for WS501 Back of Hand Mount. Available in small, medium, large and left, right.	Part # - Hand/Size: • SG-WEAR-HNWPRS-02 - Right, small • SG-WEAR-HNWPRM-02 - Right, medium • SG-WEAR-HNWPRL-02 - Right, large • SG-WEAR-HNWPLS-02 - Left, small • SG-WEAR-HNWPLM-02 - Left, medium • SG-WEAR-HNWPLL-02 - Left, large

	Zebra RS5100 Ring Scanner Accessories Guide Comprehensive guide to accessories for the Zebra RS5100 Ring Scanner, detailing batteries, charging cradles, and trigger options with part numbers and specifications.
	Zebra RS5100 Ring Scanner Accessories Guide \| Batteries, Chargers, Triggers Explore the comprehensive range of accessories for the Zebra RS5100 Ring Scanner, including batteries, charging cradles, power supplies, and various trigger and hand mount options.
	Zebra TC5X-HC Healthcare Mobile Computer Accessories and Configuration Guide Comprehensive guide to Zebra TC5X-HC healthcare mobile computer accessories, including cradles, chargers, batteries, holsters, styluses, and cables. Learn about configuration options and ecosystem for healthcare environments.
	Zebra ET40 and ET45 Accessories Guide Explore the comprehensive accessories guide for Zebra ET40 and ET45 rugged tablets. Discover a wide range of products designed to enhance power, protection, and productivity, including chargers, cradles, rugged boots, straps, and more.
	Zebra FR55 Accessories Guide Explore the comprehensive range of accessories for the Zebra FR55 mobile computer, designed to enhance productivity and protection for first responders. This guide details cradles, batteries, chargers, headsets, mounts, and protective gear.
	RS2100 Accessories Guide - Zebra Comprehensive guide to Zebra RS2100 wearable scanner accessories, including chargers, Bluetooth adapters, and wearable mounts. Details SKUs and compatibility for enterprise solutions.
	Zebra ET40 and ET45 Rugged Tablets: Comprehensive Accessories Guide Explore the full range of accessories for Zebra ET40 and ET45 rugged tablets, including power solutions, protective gear, productivity enhancers, and third-party options. This guide details chargers, cradles, expansion backs, power packs, rugged boots, straps, stands, styluses, headsets, and mounting solutions.
	Zebra MC3300ax Configuration and Accessories Guide This guide provides detailed information on configuring the Zebra MC3300ax mobile computer and lists compatible accessories, including cradles, batteries, chargers, soft goods, and country-specific power options.