Aldes GALVA RANGE: Airflow Control
Product: POC ANGLE GALVA - D355/560
Model Number: 11097281
The Aldes POC circular branch connector facilitates the creation of a 45-degree angle branch on a galvanized circular duct.
Product Description
The PEC circular branch connector creates a 45° angle branch on a galvanized circular duct.
Fields of Application
- Multi-occupancy residential housing
- New construction
- Refurbishment projects
- Non-residential buildings
Installation
- During installation, pay close attention to pressure losses, noise generation, and potential leaks.
- Features easy assembly due to interlocking accessories: ducts are female, and accessories are male.
- A final seal requires sealant and/or perforated strip.
- Attachment to the duct is achieved using self-tapping screws (4 to 6, depending on diameter).
Reference Arguments
Application
Used to add a 45° bend with a 560 mm diameter to circular ducting with a 355 mm diameter.
Description
Angled connector made of galvanized steel with diameters 355/560 mm.
Main Characteristics
- Available in diameters from 80 to 900 mm.
- Constructed from galvanized steel conforming to EN 10346, ensuring coating uniformity.
- Possesses MO fire certification.
General Data
| Variants | Main material |
|---|---|
| 11097281 | Galvanised steel |
Dimensional Data
| Variants | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11097281 | 560 | 355 |
Diagram illustrating dimensions: Shows a 45-degree angled connector with outer diameter (Ø A) and inner diameter (Ø B).
Regulatory Data
| Variants | Fire protection rating |
|---|---|
| 11097281 | MO |
