Aldes C 30° GALVA - D355 Elbow
Part of the GALVA Range for Rigid Galvanized, Aluminum, and Special Ducts
Product Description
The 30° elbow is designed to change the direction of a galvanized ductwork system by 30 degrees. Elbows up to diameter 200 mm are crimped, while elbows from diameter 250 mm to 900 mm are segmented.
Application Areas
- Collective residential housing
- New construction
- Renovation
- Commercial/Tertiary premises
Installation and Usage
Installation
- Easy accessory assembly via push-fit connections: ducts are female, accessories are male.
- Sealing should be achieved using sealant and/or perforated tape.
- Secure the connection to the duct using self-drilling screws (4 to 6, depending on diameter).
Reference Argument
Application: Change of direction by 30° for tertiary and collective air ductwork.
Product Details
Description: 30° elbow in galvanized steel, diameter 355 mm.
Key Features
- Available in diameters from 80 mm to 900 mm.
- Galvanized steel compliant with standard EN 10346, ensuring coating regularity.
- Fire classification: M0.
Data
General Data
| Reference | Main Material |
|---|---|
| 11093369 | Galvanized steel |
Dimensional Data
| Reference | Diameter Ø (mm) | Diameter Ø A (mm) |
|---|---|---|
| 11093369 | 355 | 355 |
Diagram Description
The diagram illustrates the 30° elbow. It shows a curved duct section with an inlet diameter labeled 'Ø' and an outlet diameter labeled 'Ø A', both specified as 355 mm. The elbow is designed for a 30-degree change in direction.
Regulatory Data
| Reference | Fire Classification |
|---|---|
| 11093369 | M0 |
