Aldes GALVA RANGE - POC ANGLE GALVA - D400/450
Product Code: 11097290
Description: Rigid galvanised ductwork, Aluminium and Special
Airflow control
The PEC circular branch connector creates a 45° angle branch on a galvanized circular duct.
Product Description
The PEC circular branch connector creates a 45° angle branch on a galvanized circular duct.
Fields of application
- Multi-occupancy residential housing
- New construction
- Refurbishment projects
- Non-residential buildings
Installation
- Exercise caution regarding pressure losses, noise, and potential leaks during installation.
- Features easy assembly due to interlocking male accessories and female ducts.
- A final seal is achieved using sealant and/or a perforated strip.
- Secure to the duct using 4 to 6 self-tapping screws, depending on the diameter.
Reference Arguments
Application:
Used to add a 45° bend with a 450 mm diameter to circular ducting with a 400 mm diameter.
Description:
Angled connector made of galvanized steel, suitable for 400/450 mm diameters.
Main Characteristics
- Available in diameters ranging from 80 mm to 900 mm.
- Constructed from galvanized steel conforming to EN 10346, ensuring coating uniformity.
- Possesses MO fire certification.
General Data
| Variants | Main Material |
|---|---|
| 11097290 | Galvanised steel |
Dimensional Data
| Variants | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11097290 | 450 | 400 |
Regulatory Data
| Variants | Fire protection rating |
|---|---|
| 11097290 | MO |
