Aldes POC ANGLE GALVA - D160/710
Airflow control
Product Overview
The Aldes POC Angle Galva D160/710 is a circular branch connector designed to create a 45-degree angle branch on a galvanised circular duct. It is part of the GALVA RANGE and is suitable for various airflow control applications.
Product Description
The PEC circular branch connector facilitates a 45° angle branch connection onto a galvanised circular duct.
Fields of Application
- Multi-occupancy residential housing
- New construction
- Refurbishment projects
- Non-residential buildings
Installation
- Exercise caution regarding pressure losses, noise generation, and potential leaks during installation.
- Assembly is straightforward due to interlocking accessories: ducts are designed to be female, while accessories are male.
- A final seal is recommended, achievable with sealant and/or a perforated strip.
- Secure the connector to the duct using self-tapping screws (typically 4 to 6, depending on the duct diameter).
Reference Arguments
Application: Used to add a 45° bend with a diameter of 710 mm to circular ducting with a diameter of 160 mm.
Description: Angled connector made of galvanised steel with diameters of 160/710 mm.
Main Characteristics
- Available in diameters ranging from 80 mm to 900 mm.
- Constructed from galvanised steel conforming to EN 10346 standards, ensuring coating uniformity.
- Features MO fire certification.
General Data
| Variants | Main material |
|---|---|
| 11097232 | Galvanised steel |
Dimensional Data
| Variants | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11097232 | 710 | 160 |
Regulatory Data
| Variants | Fire protection rating |
|---|---|
| 11097232 | MO |
