HIMOJO Smart Tag ACCUTAG-Google
User Guide and Specifications
Specifications
| Feature | Details |
|---|---|
| Model | ACCUTAG-Google |
| Size | 36x36x7.5 mm / 1.42x1.42x0.29 inch |
| Weight | 7.65g / 0.26 oz |
| Battery | CR2032 |
| Voltage | DC 3V |
| Current | ≤5uA (Standby) / ≤10mA (Max) |
| Wireless | BLE 5.4 |
| Wireless range | ≥40m (Line-of-sight) |
| Buzzer | Built-in ≥75db (in 10cm) |
| Temperature range | -5°C to 45°C (23°F to 113°F) |
| Humidity range | ≤95% (Non-condensing) |
| System Requirements | Android 9 or later, Google account, latest software/services. |
Getting Started
How to Connect
- Download the official "Find Hub" app from the Google Play Store.
- Ensure your phone's Bluetooth is enabled and WiFi/cellular signal is strong.
- Remove the battery insulation tab to power on the device. Your phone will automatically display the connection page.
- Click "Connect".
- Read "Use Responsibly" and click "Agree and Continue".
- Once connected, click "Open App" to access the product management page.
How to Use the Function Button
- Power on: Press the button once.
- Power off: Press and hold the button for 5 seconds.
- Reset: Press the button 4 times quickly within 3 seconds, then press and hold the 5th time until a beep is heard.
How to Replace the Battery
Use the provided tool to open the device shell.
Tip: For refunds, please remove any added items before returning the product to protect your privacy.
Find Hub Features
- See on map: View a map of your surroundings to precisely locate your tagged item. Zoom in and out as needed.
- Activate device: Use audio or visual cues (ring the tag, flash its LED) to find items that are difficult to locate.
- Hot/cold "nearby finding": Indicates signal strength to help you narrow down the location of your item when you are close by.
- A community for finding: Leverages the network of Android devices worldwide to assist in finding lost items.
- Beyond the phone: Integrates with Google Assistant on devices like Google Home or Pixel Watch. Use voice commands such as, "Hey Google, find my keys."
- Privacy, built-in: Your location data is end-to-end encrypted, ensuring only you can access it.
- For your eyes only: Google does not use or share your data collected through the Find Hub app.
- Unknown tracker alerts: Notifies you if an unfamiliar device is detected moving with you, allowing you to view its location on a map, ring it, or seek further assistance.
Regulatory and Compliance Information
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
RF Exposure
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
CE/RoHS Notice
Products with the CE marking comply with the Radio Equipment Directive (2014/53/EU). Compliance implies conformity to the following European Standards:
- EN IEC 62368-1:2020+A11:2020
- EN 62479:2010
- EN 50663:2017
- ETSI EN 301 489-1 V2.2.3(2019-11)
- Draft ETSI EN 301 489-17 V3.2.6(2023-06)
- EN 55032:2015+A1:2020+A11:2020
- EN 55035:2017+A11:2020
- ETSI EN 300 328 V2.2.2(2019-07)
Products with the RoHS marking comply with the RoHS Directive (2015/863/EU) amending Annex II to Directive (2011/65/EU).
Support
For any questions, please contact support@himojo.net.
