Smart Tag
Dimensions: 60mm x 80mm
Scan the QR code to watch the operation video: [QR Code for Operation Video] ?
Specifications
| Property | Value |
|---|---|
| Model | RSH-iTag03 |
| Size | 36x36x7.8 mm (1.42x1.42x0.31 inch) |
| Weight | 11g / 0.39 oz |
| Battery | CR2032 (Replaceable) |
| Voltage | DC 3V |
| Current | <=5uA (Standby) / <=10mA (Max) |
| Wireless | BLE 5.2 |
| Wireless range | >= 40m (Line-of-sight) |
| Buzzer | Built-in > 75db (in 10cm) |
| Temperature range | -5°C - 45°C (23°F - 113°F) |
| Humidity range | < 95% (Non-condensing) |
| System | Only for iOS, iOS and above |
| System Requirements and Compatibility | Apple ID, iPhone and iPod touch models with iOS 14.5 or later, iPad models with iPadOS 14.5 or later |
Quick Connection
- Please ensure that Bluetooth is turned on before use. ?
- Pulling out the white tab is the pairing mode. ⚪
- Scan this QR code with your iPhone camera, then tap 'Find My' below the code to enter pairing mode. [QR Code for Pairing] ?
- Follow the on-screen prompts to complete the pairing process.
How to connect to the product?
- Open the Apple Find My app and make sure Bluetooth is turned on. ? ?
- Pulling out the white tab is the pairing mode. ⚪
- Select 'Add Item' in the item list.
- Select "Other Supported Item".
- Searching Items
- Connect
- Name Item
- Choose an Pattern
- Agree
- Finish
Tip: If you want a refund, please make sure to remove the items you have added before returning to avoid disclosing your privacy.
Main functions of products
- "Find My" network location: When the device exceeds the Bluetooth distance from the phone, the device cannot be connected in the search App. Select "Lost Mode - Enabled". Enter your contact phone number, etc. If the device has been disconnected from your phone for more than a while, and there is another Apple device near the device, you will receive notifications and the latest location of the smart tag.
- Play the sound: Mobile phone and device in Bluetooth mode (generally about 20 meters). In the "Find My" App, click to play the sound. The device will issue a prompt sound, helping you quickly find the nearby smart tag.
Frequently asked questions
- When can the device be targeted by other Apple devices? When the device is separated from the owner, the Find My Network uses Bluetooth sensors on millions of Apple products to report the location of a lost Apple device nearby. When an Apple device on the network detects a lost smart tag device nearby, it reports the approximate location of the lost item to the owner of the device via the Internet.
- How to prevent devices from being used for malicious tracking? When someone else's device incorporates your belongings and tracks them for more than a while, you are alerted in two ways: If you have an iPhone, iPad, etc., Apple devices, you will be alerted on the Apple device (iOS 14 or iPadOS 14 and later versions). If you don't have an Apple device, and if someone else's smart tag leaves its owner, it emits a cue tone to alert you when it moves. Of course, there is no need to worry if your friends happen to be carrying the equipment, or if many people on the subway you take have it. Because as long as the device does not leave the owner, such reminders are not triggered.
- How to protect my privacy? Only you can see your device's location. Your location data and history will never be stored in the smart tag. The device that delivers your smart tag location data also remains anonymous, and location data is encrypted at every step of the search. So, Apple doesn't know where your device is or who helps find it.
- How to replace the battery for the equipment? You need to use the tool included in the product accessories to gently pry the upper cover to remove the battery. Battery life is usually one year.
- What is a "Find My" network? How does it work? Apple's Find My network provides an easy, secure way to find compatible personal items on maps using iPhone, iPad, iPod touch, the "Find My" App on Mac, or Find Items apps on Apple Watch. Simply use your compatible product with Apple's "Find My" App, i.e., view it with your paired Apple device. If your item is lost, you can set it to Lost mode, allowing it to display messages and contact information to anyone who finds it. The Find My network is encrypted and anonymous, so no one else, including Apple, can view its location.
How to replace the battery?
Use the tool to open the shell.
Diagram: A small tool is shown prying open the casing of the Smart Tag. Inside, a CR2032 coin cell battery is visible. Arrows indicate the tool's action and the battery's position.
Tip: If you want a refund, please make sure to remove the items you have added before returning to avoid disclosing your privacy.
Powering On/Off/Reset
How to power on: Press the button once, the device is powered on.
How to power off: Press and hold the button for 5 seconds, the device is powered off.
How to reset: Press the button 4 times within 2 seconds, then press and hold the button until you hear the beeps; the device is in reset state.
Troubleshooting method
Can't connect?
- In the Find My app, you can only choose to add other items. Cannot choose to be added to the Air Tag.
- Check whether the insulation piece has been pulled out.
- The equipment pulls out the insulation piece for the first time and enters the distribution network for three minutes. During this period, there will be no sound feedback from the single button.
- Restore factory Settings: quick button four times, and then long press at the fifth time, reset successfully issued the distribution network prompt sound.
- Update the mobile network, such as switching between WiFi and cellular networks.
- Determine whether the device is removed.
- Start the phone again and try again.
Regulatory security information
Warning: Keep the battery out of the child's reach to swallow due to chemical burns and potential esophageal perforation, which may cause serious injury or death in just 2 hours. If you suspect your child has swallowed or inserted a button battery, call the rescue number immediately to quickly get expert advice.
Rated voltage: 3V
Battery capacity: 230 mAh
Pay attention to! According to the low power radio wave radiation motor management measures.
FCC Compliance
Article 12: Without permission, the company, trade name or user shall not change the frequency, increase the power or change the characteristics and functions of the original design without authorization.
Article 14: The use of any power RF motor shall not be safe and interfere with legal communication; if any disturbance is found, it shall be stopped immediately and improved. The legal communication mentioned in the preceding paragraph means that low-power radio frequency motors for radio communication operated in accordance with the Telecommunications Law shall tolerate interference from legal communication or radiation radio wave electric motor equipment for industrial, scientific and medical use.
Notes about batteries:
This device uses a lithium battery. If the following guidelines are not followed, the lithium-ion battery life in the device may shorten or have a risk of device damage, fire, chemical burns, electrolyte leakage, and/or injury.
Do not disassemble, complete the holes, or damage the device or battery.
Do not remove or attempt to remove batteries that cannot be replaced by the user.
Do not expose the battery to flame, explosion, or other hazards.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
RF exposure:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
CE/RoHS Notice
CE Products with the CE marking comply with the Radio Equipment Directive (2014/53/EU) issued by the Commission of the European. Compliance with these directives implies conformity to the following European Standards: EN 62479:2010, EN 50663:2017, EN 62368-1:2014/A11:2017, ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-17 V3.2.4, ETSI EN 300 328 V2.2.2.
RoHS Products with the RoHS marking comply with the RoHS Directive (2015/863/EU) amending Annex II to Directive (2011/65/EU) issued by the Commission of the European.
Support
If any questions, please kindly let us know: support@himojo.net
Official Channels:
RSH-TECH Official YouTube Channel: [QR Code for RSH-TECH Official YouTube Channel] ▶️
Scan QR codes for: How to Reset [QR Code for Reset] ?, How to Use [QR Code for Use] ?, How to Replace the Battery [QR Code for Battery Replacement] ?.
