LUMIPLUS ESSENTIAL RGB REMOTE CONTROL

Important Information

This instruction manual provides essential information on safety measures for installation and start-up. Both the installer and user must read these instructions before beginning installation and start-up. Keep this manual for future reference.

Operating the RGB Remote Control

To achieve optimum performance of the RGB remote control, follow the instructions provided below:

• Click the side selector to activate the remote control [A]. (Image A shows a remote control unit with a side selector button.)
• Extend the antenna to ensure good signal coverage [B]. (Image B shows the same remote control unit with its antenna extended.)
• Hold the remote control at least 2 meters from the projector.

Lamp Control and Scenarios

The lamp is operated by the supplied remote control. It enables the following scenarios to be created:

• Fade 1
• Fade 2
• Smooth
• Flash
• Red
• Purple
• Green
• Cyan
• Blue
• White
• Orange
• Off

Technical Notes and Safety

In both cases, ensure the voltage received by the lamp does not exceed 12V AC. The lamp must only be operated underwater and anchored to the vertical walls of the pool.

The remote control uses a 12V battery, type 23A.

Declarations and Compliance

SACOPA SAU declares that the radio equipment type 75775 is in compliance with EU Directives 2014/53/EU and 2015/863/EU.

The product bears the CE conformity mark.

Manufactured in China.