Dogtra ARC1200S FREE PLUS / ARC1202S FREE PLUS Initialization Notice

Emitter and Receiver Overview

Initialization Steps

1. Begin initialization with the emitter turned ON and the collar receiver turned OFF. Locate the D1/D2 toggle switch on the front of the emitter. Set this switch to "D1" to initialize the BLACK collar receiver. Set the switch to "D2" to initialize the ORANGE collar receiver.

2. Select intensity level 0 on the emitter.

3. Press and hold the collar receiver's On/Off button for 5 seconds, until the receiver's green LED indicator blinks rapidly.

4. Simultaneously press and hold the Nick button and the Continuous button located on the left side of the emitter for 3 seconds, or until the collar receiver's LED indicator blinks more slowly. The initialization process is now complete. If you activate the P (Pager) button on the emitter, the collar receiver should vibrate.