ATEN CE920 USB DisplayPort HDBaseT 2.0 KVM Extender

Product Overview

The ATEN CE920 is a USB DisplayPort HDBaseT 2.0 KVM Extender designed to extend KVM (Keyboard, Video, Mouse) signals over long distances using HDBaseT technology. It allows users to access a computer from a remote console, providing flexibility and convenience for various applications.

Package Contents

CE920L (Local Unit) Package Contents:

• 1x CE920L USB DisplayPort HDBaseT 2.0 KVM Extender (Local Unit)
• 1x Microphone cable
• 1x Speaker cable
• 1x USB Type-A to Type-B cable
• 1x DisplayPort cable
• 2x Mounting kits
• 8x Foot pads
• 2x Power adapters
• 1x User instructions

CE920R (Remote Unit) Package Contents:

• 1x CE920R USB DisplayPort HDBaseT 2.0 KVM Extender (Remote Unit)
• 2x Mounting kits
• 4x Foot pads
• 1x Power adapter
• 1x User instructions

Hardware Overview

CE920L (Local Unit)

Front View:

• 1: RS-232 serial port
• 2: Link LED
• 3: Power LED

Rear View:

• 4: Power jack
• 5: HDBaseT out
• 6: DisplayPort in
• 7: USB Type-B port
• 8: Audio out
• 9: Audio in
• 10: Long reach mode switch
• 11: Firmware upgrade switch

CE920R (Remote Unit)

Front View:

• 1: RS-232 serial port
• 2: Wake up PC pushbutton
• 3: Video out LED
• 4: Link LED
• 5: Power LED

Rear View:

• 6: Power jack
• 7: HDBaseT in
• 8: DisplayPort out
• 9: USB Type-A ports
• 10: Audio out
• 11: Audio in
• 12: Long reach mode switch
• 13: Firmware upgrade switch

Installation

1. Connect one end of the supplied microphone cable to the rear of the CE920L, and the other end to a local computer. Do the same using the supplied speaker cable.
2. Connect the supplied USB cable to the USB Type-B port on the CE920L, and the other end to a USB Type-A port on the local computer.
3. Connect the supplied DisplayPort cable to the DisplayPort input port on the CE920L, and the other end to the local computer.
4. Plug one end of an Ethernet cable into the HDBaseT output port on the CE920L, and the other end into the HDBaseT input port on the CE920R.
5. Plug one of the supplied power adapters into a power source, and then plug the adapter's power cable into the power jack on the CE920L.
6. Use a DisplayPort cable to connect the DisplayPort output port on the CE920R to your monitor.
7. Plug USB devices (mouse, keyboard, etc.) into their respective USB ports on the CE920R.
8. Plug the microphone and speakers into their respective audio ports on the CE920R.
9. Plug the second power adapter into a power source, and then plug the adapter's power cable into the power jack on the CE920R.
10. To use the wake up PC pushbutton, use an RS-232 serial cable to connect the RS-232 serial port on the CE920L to the local computer.
11. To control the local computer with a serial device, connect the RS-232 serial port on the CE920L to the local computer as illustrated in step 10, and then connect a hardware / software controller to the RS-232 serial port on the CE920R. Note: The RS-232 serial port supports bi-directional transmission.
12. To extend video of 1080p up to 150 m, put either the CE920L or CE920R's long reach mode switch to ON.

Rack Mount

1. Using the screws from the supplied mounting kits, secure the mounting bracket to the top or bottom of the CE920.
2. Using self-prepared screws, secure the mounting bracket to a preferred location on the rack.
3. Note: Rack screws are not provided. ATEN recommends using M5 Phillips recessed screws.

LED Display and System Status

Note: The Video Out LED is only available on the CE920R.

Support and Documentation

All information, documentation, firmware, software utilities, and specifications contained in this package are subject to change without prior notification by the manufacturer. To reduce the environmental impact of ATEN products, documentation and software can be found online at http://www.aten.com/download/.

For Technical Support, visit www.aten.com/support.