ATEN CE980/CE990 USB True 4K DisplayPort/HDMI Optical KVM Extender

Package Contents

• 1 CE980 / CE990 USB True 4K DisplayPort / HDMI Optical KVM Extender (Local Unit)
• 1 CE980 / CE990 USB True 4K DisplayPort / HDMI Optical KVM Extender (Remote Unit)
• 1 DisplayPort cable
• 1 HDMI cable
• 1 microphone cable
• 1 speaker cable
• 1 USB Type-A to USB Type-B cable
• 2 SFP modules
• 2 mounting kits
• 1 foot pad set (8 pcs)
• 2 power adapters and power cords
• 3 HDMI combo port cable locks
• 1 user instructions

Hardware Overview

CE980L / CE990L (Local Unit)

• 1: Auto / Local pushbutton (USB control mode)
• 2: Audio in
• 3: Audio out
• 4: USB Type-B port
• 5: DisplayPort/HDMI in
• 6: USB control mode LEDs
• 7: Status LEDs (DisplayPort/HDMI in / link / power)
• 8: Power jack
• 9: Optical out
• 10: DisplayPort/HDMI out
• 11: USB Type-A ports (USB peripheral)
• 12: USB Type-A ports (keyboard / mouse)
• 13: Audio in
• 14: Audio out
• 15: RS-232 serial port

CE980R / CE990R (Remote Unit)

• 1: Auto / Remote pushbutton (USB control mode)
• 2: Wake up PC pushbutton
• 3: USB micro-B port (firmware upgrade)
• 4: USB control mode LEDs
• 5: Status LEDs (DisplayPort/HDMI out / link / power)
• 6: Power jack
• 7: Optical in
• 8: DisplayPort/HDMI out
• 9: USB Type-A ports (USB peripheral)
• 10: USB Type-A ports (keyboard / mouse)
• 11: Audio in
• 12: Audio out
• 13: RS-232 serial port

Installation

Rack Mount

1. Using the screws from the supplied mounting kits, secure the mounting bracket to the top or bottom of the CE980 / CE990.
2. Using self-prepared M5 Phillips recessed screws, secure the mounting brackets to a preferred location on the rack. You can rack mount the CE980 / CE990 with either the front or rear facing upwards.

Connecting the Device

1. Connect one end of the supplied microphone cable to the audio input jack located on the front of the CE980L / CE990L, and the other end to a local computer. Do the same using the supplied speaker cable for the audio output jack.
2. Connect the supplied USB cable to the USB Type-B port on the CE980L / CE990L, and the other end to a USB Type-A port on the local computer.
3. Connect the supplied DisplayPort/HDMI cable to the DisplayPort/HDMI input port on the CE980L / CE990L, and the other end to a local computer.
4. Before connecting the optical fiber, it is required to install the supplied SFP module to the optical input and output ports. Connect one end of an optical fiber cable to the optical output port on the CE980L / CE990L, and the other end to the optical input port on the CE980R / CE990R.
5. Connect up to two DisplayPort and/or HDMI-enabled monitors to the DisplayPort/HDMI output ports on the CE980L / CE990L and CE980R / CE990R via DisplayPort and/or HDMI cable(s).
6. Connect USB peripherals (mouse, keyboard, flash drive, etc.) into their respective USB Type-A ports on the CE980L / CE990L and CE980R / CE990R. To switch to a different control mode for USB keyboard / mouse ports, use the auto / local pushbutton (CE980L / CE990L) and auto / remote pushbutton (CE980R / CE990R). For more information, please refer to the user manual.
7. Connect the microphone and speakers into their respective audio jacks on the CE980L / CE990L and CE980R / CE990R.
8. To use the wake up PC pushbutton, use an RS-232 serial cable to connect the RS-232 serial port on the CE980L / CE990L to the local computer.
9. To control a local computer with a serial device, connect the RS-232 serial port on the CE980L / CE990L to the local computer as illustrated in step 8, and then connect a hardware / software controller to the RS-232 serial port on the CE980R / CE990R. Note: The RS-232 serial port supports bi-directional transmission.
10. (a) Connect one of the supplied power adapters into a power source, and then connect the adapter’s power cable to the power jack on the CE980L / CE990L.
11. (b) Connect the second power adapter into a power source, and then connect the adapter’s power cable to the power jack on the CE980R / CE990R.

Support and Documentation Notice

All information, documentation, firmware, software utilities, and specifications contained in this package are subject to change without prior notification by the manufacturer.

To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/

Technical Support: www.aten.com/support