PRMC PrimeChime Plus 2 Mini

Product Description

The PrimeChime Plus 2 Mini® keeps all the popular features of NICOR's PrimeChime Plus 2® electronic doorbell while shrinking the unit to fit into a single gang junction box. Compatible with many video doorbell systems, the PRMC combines both line voltage and low voltage into a single unit and offers a paintable, screwless faceplate for simple installation and a seamless look. Separate melodies for front and rear doors allows you to keep track of exactly which door to answer. NICOR's lighted button makes your doorbell easily visible to visitors at all times of day, welcoming them to your home. The PRMC is also compatible with many video doorbell systems, increasing the security of your home with a reliable, minimal door chime kit.

Image of the NICOR PRMC PrimeChime Plus 2 Mini electronic door chime, showing the main chime unit and two doorbell buttons.

Features

Construction

• ABS Housing
• Combines line voltage and low voltage in a single unit
• Screwless ABS Faceplate
• Two-wire pigtail for line voltage input
• Multiple poke-in connectors for low voltage output for front and back doorbells

Electrical

• Integrated transformer
• Input: 120VAC/60Hz
• Output: 24VAC max
• Digital control board with speaker
• Five selectable melodies: Ding Dong, Westminster, 3 note, 5 note, and 7 note
• Five selectable volume levels
• Voice guided setup during selection

Finish

• Matte White
• Faceplate is field paintable

Installation

• Installs quickly into most non-metallic single-gang junction boxes
• Includes two lighted rectangle doorbell buttons
• Compatible with many popular video doorbell buttons (refer to compatibility list or test for compatibility before installation)
• Able to drive up to 2 video doorbells at the same time.
• Daisy chain up to 10 PrimeChime Plus Mini® units (max 400ft total wire length)*
• Doorbell buttons connect with 18ga-22ga solid wire (max 100ft distance)
• For installations where higher power surge may be possible, NICOR recommends installing additional surge protection at the electrical distribution panels.

*Each chime requires individual 120VAC input.

Warranty

• 1 year limited system warranty standard
• Warranty does not cover product failure due to an overvoltage event (power surge).

Ordering Information

Specifications and dimensions subject to change without notice.

Example: PRMC1120WH

Accessories

See PRCP2 Button spec sheet for more information.

• PRCP2BUTTONDBBK: Lighted Decorative Button - Black
• PRCP2BUTTONDBCO: Lighted Decorative Button - Copper
• PRCP2BUTTONDBNK: Lighted Decorative Button - Nickel
• PRCP2BUTTONDBWH: Lighted Decorative Button - White
• PRCP2BUTTONSBAB: Lighted Stucco Button - Antique Brass
• PRCP2BUTTONSBBZ: Lighted Stucco Button - Architectural Bronze
• PRCP2BUTTONSBPB: Lighted Stucco Button - Polished Brass
• PRCP2BUTTONSBNK: Lighted Stucco Button - Nickel
• PRCP2BUTTONSBWH: Lighted Stucco Button - White
• PRCP2STROBE: Remote Wired Visual Strobe Light

Compatibility

Recommended Video Doorbell*

*Not a complete list. Call NICOR or test for compatibility before installation.

Dimensions

The product dimensions are as follows:

• Main unit width: 3.15 inches (80 mm)
• Main unit height: 4.65 inches (118 mm)
• Main unit depth: 1.81 inches (46 mm)
• Button connector wire length: 0.39 inches (10 mm)

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Contact Information

NICOR, LLC.
2200 Midtown Place NE, Albuquerque, NM 87107
Phone: 800.821.6283
Fax: 800.892.8393
Website: www.nicorlighting.com
Document Date: February 7, 2025