PrimeChime Plus 2

Product Description

The PrimeChime Plus 2 continues to define what a modern doorbell should be. The latest version offers Melody Selection with five different, user-selected, ring tones and five different volume levels using a simple single button, voice-guided, interface. The PRCP2 combines both line voltage and low voltage into a single unit and offers a paintable, screwless faceplate for simple installation and a seamless look. Separate, selectable, ring tones for front and rear doors allow users to keep track of exactly which door to answer. NICOR's lighted button makes the doorbell easily visible to visitors at all times of day, welcoming them to the home. Improved compatibility with most video doorbell buttons enhances security and peace of mind.

Construction

• ABS Housing
• Combines line voltage and low voltage in a single unit
• Screwless ABS Faceplate
• Two-wire pigtail for line voltage input
• Multiple poke-in connectors for low voltage output for front and back doorbells
• Selection push button and indicator light behind faceplate

Electrical Specifications

• Integrated transformer
• Input: 120VAC/60Hz
• Output: 20VAC
• Digital control board with speaker
• Five selectable chime tones: Ding Dong, Westminster, 3 note, 5 note, and 7 note
• Five selectable chime tone volumes
• Voice-guided setup during selection

Finish

• Matte White
• Faceplate is field paintable

Installation

• Installs quickly into a standard two-gang dual-voltage wall box.
• Includes two lighted rectangle doorbell buttons.
• Compatible with many popular video doorbell buttons (check compatibility list or test before installation).
• Daisy chain two PrimeChime Plus 2 units (max 200ft total wire length)*. Each chime requires individual 120VAC input.
• Doorbell buttons connect with 18ga-22ga solid wire (max 100ft distance).
• For installations where higher power surge may be possible, NICOR recommends installing additional surge protection at electrical distribution panels.

Warranty

• 1 year limited system warranty standard.
• Warranty does not cover product failure due to an overvoltage event (power surge).

Ordering Information

Series: PRCP2

Example: PRCP2 [blank] (for standard unit) or PRCP2 EB (for ecobee adapter kit).

Accessories

Lighted Decorative Buttons

• PRCP2BUTTONDBBK: Black
• PRCP2BUTTONDBCO: Copper
• PRCP2BUTTONDBNK: Nickel
• PRCP2BUTTONDBWH: White

Lighted Stucco Buttons

• PRCP2BUTTONSBAB: Antique Brass
• PRCP2BUTTONSBBZ: Architectural Bronze
• PRCP2BUTTONSBPB: Polished Brass
• PRCP2BUTTONSBNK: Nickel
• PRCP2BUTTONSBWH: White

Other Accessories

• PRCP2STROBE: Remote Wired Visual Strobe Light
• PRCP2EBADAPT1WH: Adapter for Ecobee compatibility

Compatibility

Note: Not a complete list. Call NICOR or test for compatibility before installation.

Compatibility Notes:

• To ensure proper operation of the PRCP2, no more than one video doorbell should be attached (Front Door or Back Door).
• Have account username, password, and Wi-Fi code on hand during setup.
• Make sure both chime firmware and App software are fully updated before installation.
• Make sure the video doorbell is fully charged prior to installation. Low battery levels may cause abnormal performance.
• A "power" or "diode" kit should not be installed. The NICOR unit is designed to provide the proper voltage for compatible video doorbells.
• 1) Sync doorbell and chime before installation of the PRCP2.
• 2) Set to mechanical doorbell setting.
• 3) Have battery fully charged before installation.
• 4) Make sure both chime firmware and App software are fully updated before installation.
• 5) Must use the NICOR ecobee adapter.
• 6) Adjust the "Ring tone length" in the App to 2 seconds to avoid multiple chime cycles (see Ring instructions for details).

Dimensions

Height: 4.75 inches (121 mm)

Width: 5.0 inches (127 mm)

Depth: 1.97 inches (50 mm)

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.