NICOR PRCP2A PrimeChime Plus 2

Product Description

The NICOR PRCP2A PrimeChime Plus 2 is a modern doorbell designed to meet ADA compliance standards. It features an integrated strobe light and supports optional remote strobes. With enhanced video doorbell compatibility, it is an ideal choice for homebuilders and homeowners. The PRCP2A offers five user-selectable ring tones and five volume levels, controlled via a simple single-button, voice-guided interface. It seamlessly integrates both line voltage and low voltage into a single unit and includes a paintable, screwless faceplate for easy installation. The chime can be wired to two separate doorways, each with its own unique chime tone. For larger homes or multiple entrances, two units can be daisy-chained. The PRCP2A kit includes two standard illuminated pushbuttons, mounting hardware, installation instructions, and a 1-year warranty. Additional decorative and stucco buttons are also available in a variety of colors.

Construction

• ABS Housing
• Combines line voltage and low voltage in a single unit
• Screwless ABS Faceplate
• Two-wire pigtail for line voltage input
• Multiple poke-in connectors for low voltage output (front/back doorbells)
• Blue strobe light acts as a visual indicator of chime ringing

Electrical Specifications

• Integrated transformer
• Input: 120VAC/60Hz
• Output: 20VAC
• Digital control board with speaker
• Five selectable chime tones: Ding Dong, Westminster, 3 note, 5 note, and 7 note
• Five selectable chime tone volumes
• Voice-guided setup for selection
• Strobe can be activated/deactivated

Finish

• Matte White
• Faceplate is field paintable

Installation

• Installs quickly into a standard two-gang dual-voltage wall box.
• Includes two lighted rectangle doorbell buttons.
• Compatible with many popular video doorbell buttons (refer to compatibility list or test for compatibility before installation).
• Daisy chain one additional PrimeChime Plus 2® unit (max 100ft total wire length)*.
• Doorbell buttons connect with 18ga-22ga solid wire (max 100ft distance).
• For installations where higher power surge may occur, NICOR recommends installing additional surge protection at electrical distribution panels.
• *Each chime requires individual 120VAC input.

Warranty

• 1 year limited system warranty standard.
• Warranty does not cover product failure due to an overvoltage event (power surge).

Ordering Information

Series: PRCP2A

Accessories

Lighted Decorative Buttons

• PRCP2BUTTONDBBK: Lighted Decorative Button - Black
• PRCP2BUTTONDBCO: Lighted Decorative Button - Copper
• PRCP2BUTTONDBNK: Lighted Decorative Button - Nickel
• PRCP2BUTTONDBWH: Lighted Decorative Button - White

Lighted Stucco Buttons

• PRCP2BUTTONSBAB: Lighted Stucco Button - Antique Brass
• PRCP2BUTTONSBBZ: Lighted Stucco Button - Architectural Bronze
• PRCP2BUTTONSBPB: Lighted Stucco Button - Polished Brass
• PRCP2BUTTONSBNK: Lighted Stucco Button - Nickel
• PRCP2BUTTONSBWH: Lighted Stucco Button - White

Other Accessories

• PRCP2STROBE: Remote Strobe Light

Doorbell Compatibility

*Not a complete list. Call NICOR or test for compatibility before installation.

Dimensions

The main unit has dimensions of 5.0 inches (127 mm) in width and 4.75 inches (121 mm) in height. The depth or projection from the wall is 1.97 inches (50 mm).

Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.