NICOR PRCP2 PrimeChime Plus 2

Product Description

The PrimeChime Plus 2 continues to define modern doorbells. It offers Melody Selection with five user-selected ring tones and five volume levels, controlled via a simple single-button, voice-guided interface. The PRCP2 integrates both line voltage and low voltage into a single unit, featuring a paintable, screwless faceplate for simple installation and a seamless look. Separate, selectable ring tones for front and rear doors help identify which door to answer. NICOR's lighted button enhances visibility for visitors, and improved compatibility with most video doorbell buttons boosts security and peace of mind.

Features & Specifications

Construction

• ABS Housing
• Combines line voltage and low voltage in a single unit
• Screwless ABS Faceplate
• Two-wire pigtail for line voltage input
• Multiple poke-in connectors for low voltage output for front and back doorbells
• Selection push button and indicator light behind face plate

Electrical

• Integrated transformer
• Input: 120VAC/60Hz
• Output: 20VAC
• Digital control board with speaker
• Five selectable chime tones: Ding Dong, Westminster, 3 note, 5 note, and 7 note
• Five selectable chime tone volumes
• Voice guided setup during selection

Finish

• Matte White
• Faceplate is field paintable

Installation

• Installs quickly into a standard two-gang dual-voltage wall box
• Includes two lighted rectangle doorbell buttons
• Compatible with many popular video doorbell buttons (refer to compatibility list or test for compatibility before installation)
• Daisy chain one additional PrimeChime Plus 2 unit (max 100ft total wire length)*
• Doorbell buttons connect with 18ga-22ga solid wire (max 100ft distance)
• For installations where higher power surge may be possible, NICOR recommends installing additional surge protection at the electrical distribution panels
• *Each chime requires individual 120VAC input

Warranty

1 year limited system warranty standard. Warranty does not cover product failure due to an overvoltage event (power surge).

Certifications: [CULUS Certified], [UL Listed], [1 Year Warranty], [Patent Pending]

Available Accessories

• PRCP2BUTTONDBBK: Lighted Decorative Button - Black
• PRCP2BUTTONDBCO: Lighted Decorative Button - Copper
• PRCP2BUTTONDBNK: Lighted Decorative Button - Nickel
• PRCP2BUTTONDBWH: Lighted Decorative Button - White
• PRCP2BUTTONSBAB: Lighted Stucco Button - Antique Brass
• PRCP2BUTTONSBBZ: Lighted Stucco Button - Architectural Bronze
• PRCP2BUTTONSBPB: Lighted Stucco Button - Polished Brass
• PRCP2BUTTONSBNK: Lighted Stucco Button - Nickel
• PRCP2BUTTONSBWH: Lighted Stucco Button - White

Compatibility

The PRCP2 is compatible with a wide range of video doorbells. Please consult the list below or test for compatibility before installation.

Dimensions

Product image showing the NICOR PRCP2 PrimeChime Plus 2 unit and a separate lighted doorbell button. The physical dimensions of the unit are: 5.0 inches (127 mm) width, 4.75 inches (121 mm) height, and 1.97 inches (50 mm) depth.

Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.