Set A: Single Sofa Assembly
Parts List for Set A
| Part ID | Description | Quantity |
|---|---|---|
| a1 | Screw M6*18 | 16PCS |
| a2 | Screw M6*32 | 4PCS |
| a3 | Screw M6*45 | 8PCS |
| a6 | Washer M6 | 20PCS |
| a7 | Screw M6 | 8PCS |
| a8 | Allen Wrench ⚙️ | 1PCS |
| a9 | Spanner ? | 1PCS |
| a10 | Clip | 4PCS |
| E1 | Cushion Cover | 2PCS |
| E2 | Seat Cushion | 2PCS |
| E3 | Back Cushion | 2PCS |
| C1 | Frame Part | 2PCS |
| C2 | Frame Part | 2PCS |
| C3 | Frame Part | 2PCS |
| (1) | Foot/Connector | 4PCS |
| (2) | Foot/Connector | 4PCS |
Assembly Steps for Single Sofa
Step 1: Assemble Base Frame
Join the base frame part (C3) with side frame parts (C2). Use screws (a1) and washers (a6). The diagram shows the C3 structure forming the base and C2 pieces attaching to its sides.
Visual: A 3D exploded view showing C3 as the bottom rectangle and C2 pieces attaching vertically to its sides, secured by screws and washers.
Step 2: Attach Back Frame
Attach the back frame part (C1) to the assembled base. Use screws (a2), washers (a6), and nuts (a7). The diagram shows the C1 piece being fitted onto the rear of the C3/C2 structure.
Visual: The partially assembled sofa frame with the C1 piece being attached to the back, secured by screws, washers, and nuts.
Step 3: Install Feet
Install the feet (parts labeled '1' and '2') onto the bottom of the assembled sofa frame. Use screws (a1) and washers (a8). The diagram shows the feet being attached to the corners of the base.
Visual: Close-up views showing how the feet are attached to the underside of the sofa frame using screws and washers.
Assembly Accomplished (Single Sofa)
A completed single armless chair is shown. You can assemble another armless chair using the same steps.
Visual: A finished single armless chair with cushions placed inside.
General Assembly: Clips and Cushions
Clips Assembly
Use clips (a10) to connect sofa sections together. The diagram shows clips being attached to the frame of one sofa section and then connecting to another.
Visual: An illustration showing how clips are used to join two sofa frame sections together.
Cushion Assembly
Place the seat cushion (E2) and back cushion (E3) into the cushion cover (E1). Then, place the assembled cushion into the sofa frame.
Visual: A sequence of images showing a cushion cover, then cushions being inserted into it, and finally the complete cushion being placed into the sofa.
Set B: Table Assembly
Parts List for Set B
| Part ID | Description | Quantity |
|---|---|---|
| a1 | Screw M6*18 | 24PCS |
| a2 | Screw M6*32 | 12PCS |
| a3 | Screw M6*45 | 8PCS |
| a5 | Screw M6*28 | 4PCS |
| a6 | Washer M6 | 32PCS |
| a7 | Screw M6 | 8PCS |
| a8 | Allen Wrench ⚙️ | 1PCS |
| a9 | Spanner ? | 1PCS |
| a10 | Clip | 4PCS |
| E1 | Cushion Cover | 2PCS |
| E2 | Seat Cushion | 2PCS |
| E3 | Back Cushion | 2PCS |
| E4 | Table Top | 1PCS |
| C1 | Frame Part | 2PCS |
| C2 | Frame Part | 2PCS |
| C3 | Frame Part | 2PCS |
| D1 | Frame Part | 2PCS |
| D2 | Frame Part | 2PCS |
| D3 | Frame Part | 1PCS |
| (1) | Foot/Connector | 8PCS |
| (2) | Foot/Connector | 4PCS |
Assembly Steps for Table
Step 1: Assemble Table Frame (Part 1)
Begin assembling the table frame by joining parts D2, D3, and D1. Use screws (a5), washers (a6), and nuts (a8). The diagram shows the initial frame structure.
Visual: An illustration showing the initial assembly of table frame components D2, D3, and D1, secured with screws, washers, and nuts.
Step 2: Assemble Table Frame (Part 2)
Continue assembling the table frame by adding more parts. Use screws (a2), washers (a6), and nuts (a8). The diagram shows further frame pieces being attached.
Visual: The table frame assembly progressing, with additional parts D1 and D2 being connected using screws, washers, and nuts.
Step 3: Install Table Feet
Install the feet (parts labeled '1') onto the bottom of the assembled table frame. Use screws (a1) and washers (a8). The diagram shows the feet being attached to the corners.
Visual: Close-up views demonstrating the attachment of feet to the underside of the table frame with screws and washers.
Step 4: Attach Table Top
Place the table top (E4) onto the assembled table frame. The diagram shows the E4 piece being positioned on top of the frame.
Visual: The table top (E4) being placed onto the completed table base.
Assembly Accomplished (Table)
A completed table is shown.
Visual: A finished table with its top and base.
Set C: Corner Sofa Assembly
Parts List for Set C
| Part ID | Description | Quantity |
|---|---|---|
| a1 | Screw M6*18 | 16PCS |
| a3 | Screw M6*45 | 14PCS |
| a4 | Screw M6*110 | 2PCS |
| a6 | Washer M6 | 30PCS |
| a7 | Nut M6 | 14PCS |
| a8 | Allen Wrench ⚙️ | 1PCS |
| a9 | Spanner ? | 1PCS |
| a10 | Clip | 2PCS |
| A1 | Frame Part | 1PCS |
| A2 | Frame Part | 1PCS |
| B1 | Frame Part | 1PCS |
| B2 | Frame Part | 1PCS |
| A3 | Frame Part | 2PCS |
| E2 | Seat Cushion | 2PCS |
| E3 | Short Back Cushion | 2PCS |
| E5 | Cushion Cover | 2PCS |
| E6 | Long Back Cushion | 2PCS |
| (1) | Foot/Connector | 8PCS |
Right Corner Sofa Assembly
Step 1: Assemble Frame (Part 1)
Join frame parts (A1) and (A3). Use screws (a3), washers (a6), and nuts (a7). The diagram shows A1 and A3 being connected.
Visual: Illustration showing frame parts A1 and A3 being joined with screws, washers, and nuts. A note advises careful checking of similar parts like A1/B1 and A2/B2 due to hole position differences.
Step 2: Assemble Frame (Part 2)
Attach frame part (A2) to the assembled structure. Use screws (a4), washers (a6), and nuts (a3). The diagram shows A2 being fitted.
Visual: The right corner sofa frame assembly continues with part A2 being attached using screws, washers, and nuts.
Step 3: Install Feet
Install the feet (parts labeled '1') onto the bottom of the assembled frame. Use screws (a1) and washers (a8). The diagram shows feet attached to the base.
Visual: Close-up views showing the attachment of feet to the underside of the right corner sofa frame.
Assembly Accomplished (Right Corner Sofa)
A completed right corner sofa is shown.
Visual: A finished right corner sofa unit.
Left Corner Sofa Assembly
Step 1: Assemble Frame (Part 1)
Join frame parts (A3) and (B1). Use screws (a3), washers (a6), and nuts (a7). The diagram shows A3 and B1 being connected.
Visual: Illustration showing frame parts A3 and B1 being joined with screws, washers, and nuts. A note advises careful checking of similar parts like A1/B1 and A2/B2 due to hole position differences.
Step 2: Assemble Frame (Part 2)
Attach frame part (B2) to the assembled structure. Use screws (a4), washers (a6), and nuts (a3). The diagram shows B2 being fitted.
Visual: The left corner sofa frame assembly continues with part B2 being attached using screws, washers, and nuts.
Step 3: Install Feet
Install the feet (parts labeled '1') onto the bottom of the assembled frame. Use screws (a1) and washers (a8). The diagram shows feet attached to the base.
Visual: Close-up views showing the attachment of feet to the underside of the left corner sofa frame.
Assembly Accomplished (Left Corner Sofa)
A completed left corner sofa is shown.
Visual: A finished left corner sofa unit.
Cushion Assembly (for Corner Sofas)
Place the long back cushion (E6) and short back cushion (E3) into the corresponding sides of the cushion cover (E5). Then, place the assembled cushion into the sofa frame.
Visual: A sequence showing long and short back cushions being inserted into a cushion cover, and then the completed cushion being placed into a corner sofa unit.
Attention ❗
- We care about every customer's using experience, please feel free to chat us if has anything missing or damaged or any advice, efficient solution would be offered soon.
- Recommend to use waterproof furniture cover for entire patio sofa set when out of use to keep them.
- Sofa cushion cover can be removable and clean up by cleaner when have stains.
- It's available to adjust foot height regarding ground condition to keep sofa in balance.
