Installation Instructions
Product: Modern Black Aluminum Long Strip LED Semi Flush Mount Ceiling Light
Model: DJ1900C
Brand: Homdiy
Step 1: Fasten the light fixture
Secure the light fixture to the mounting surface using the provided screws.
Diagram shows screws being inserted into a mounting bracket.
Step 2: Wiring and Mounting
Safety First: Cut off the power system in your home to ensure safety before proceeding.
Wiring Connections:
- Connect the brown wire to the "L" terminal.
- Connect the blue wire to the "N" terminal.
- Connect the yellow/green wire to the "E" (earth) terminal.
Mounting:
A self-tapping screw passes through the hanging plate hole, then tighten it clockwise to lock the hanging plate.
Connect the wires to the appropriate terminals.
The ceiling plate is fixed with screws.
Diagram shows a ceiling with electrical wires (brown, blue, yellow/green) emerging from a junction box. A hand is depicted holding a switch, indicating the action of cutting off power. A mounting bracket is shown attached to the ceiling. The wires are then connected to terminals labeled 'L' (for brown), 'N' (for blue), and 'E' (for yellow/green). Finally, the ceiling plate is shown being secured to the ceiling with screws.
Step 3: Turn on the power
After all connections and mounting are complete, turn the power back on.
Lamp Instructions & Precautions
Maintenance
- Voltage: 110-120V
- Please wear [gloves] when installing.
- Do not install on a moist ceiling [no moisture].
- Turn off the power [power off] before cleaning.
- Please wash with a sanitizer without corrosivity [no corrosive cleaner].
Precautions
- Keep the lighting away from acidic chemical solvents [no chemical solvents] to avoid damage.
Tip
[tip] Please follow the instructions and install the parts in the correct order.
