Macaron LED Flush Mount Ceiling Light Installation Guide
Model: CL0102
Product Overview
This document provides installation instructions for the Homdiy Macaron LED Flush Mount Ceiling Light. Please read all instructions carefully before beginning installation.
Safety Precautions
- Step 1: Power Off Locate the circuit breaker or fuse box that controls the power to the installation area. Switch off the power supply to avoid any electrical hazards during the installation process. [power-off-symbol]
Installation Steps
-
Step 1: Prepare the Installation Area
Ensure the power to the installation area is switched off at the circuit breaker or fuse box.
-
Step 2: Mount the Bracket
Hold the included mounting bracket against the wall or ceiling at the desired installation height. Use a pencil to mark the positions of the screw holes. Ensure the bracket is level. Drill holes at the marked positions and insert anchors if necessary for secure attachment.
-
Step 3: Secure the Bracket
Screw the bracket into the wall or ceiling using the provided screws and anchors.
-
Step 4: Connect the Wires
Connect the lamp wires to the corresponding reserved wires in the ceiling. Ensure proper connections are made, using insulation tape if necessary for secure and insulated connections.
-
Step 5: Attach the Lamp
Fix the wall lamp by tightening the screws from the top and bottom sides to secure it in place.
Additional Information
Dimensions: Approximately 14cm in diameter, 2.25cm in height.
Included: Mounting bracket, screws, anchors, insulation tape.
Brand: Homdiy
