VEVOR CPU Cooler

VEVOR is committed to providing tools at competitive prices. Phrases like "Save Half" or "Half Price" represent an estimate of potential savings compared to major top brands and do not guarantee savings across all product categories. Customers are advised to verify savings carefully when placing an order.

Product Overview

Two VEVOR CPU coolers are depicted. The top cooler features three black fans. The bottom cooler showcases three fans with customizable RGB lighting. Both models include a circular pump unit with a digital display showing time and CPU temperature.

This document contains the original instructions. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret its user manual. The appearance of the product is subject to the item received. VEVOR will not provide further notification for any technology or software updates.

Safety and Compliance

Warning: To reduce the risk of injury, user must read instructions manual carefully.

[FCC logo] This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

[WEEE symbol] This product is subject to European Directive 2012/19/EC. The symbol of a crossed-out wheelie bin indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such must not be discarded with normal domestic waste but must be taken to a collection point for recycling electrical and electronic devices.

INSTRUCTIONS

• The CPU cooler is equipped with a 360mm radiator and three 120mm PWM fans for excellent heat transfer from the CPU.
• The pump features LED lighting to match your PC build (YC-01-SS-003).
• The 120mm PWM fan delivers improved airflow for extreme CPU cooling performance.
• Compatible with multi sockets including Intel 115X/1366/2011/1700/1200 and AMD AM5/AM4.
• Compatible with Windows 10 and Windows 11 operating systems.

Installation Steps

1. Step 1: Preparation

   Illustration shows applying thermal paste to the CPU surface after removing a protective film from the cooler's base.

2. Step 2: Intel LGA 115X/1200/1700 Installation

   Diagram illustrates attaching the Intel backplate and mounting brackets to a motherboard for LGA 115X/1200/1700 sockets using screws.

3. Step 2.1: Intel LGA 2011 Installation

   Diagram shows securing the CPU cooler block to a motherboard for Intel LGA 2011 sockets using specific screws.

4. Step 3: AMD Preparation

   Illustration depicts preparing the motherboard for AMD cooler installation, including removing the original socket and retaining the backplane.

5. Step 4: AMD Installation

   Diagram shows the AMD mounting bracket being attached to the motherboard with fasteners.

6. Step 5: Connections

   Diagram illustrates the connection of the CPU cooler's pump, fans, and RGB lighting to the motherboard's corresponding headers (AIO/PUMP, CPU_FAN, 5V ARGB) and the USB 2.0 header for the display. Please link the display to the motherboard USB2.0 interface (Generally in the lowermost position of the motherboard, according to the direction of the interface gap can be inserted, guests can check according to the motherboard manual). Connect the 3-pin connector from the pump unit to AIO/PUMP socket on the motherboard. Connect the 4-pin fan PWM connector to CPU_FAN socket on the motherboard. Connect the fan to the 5V ARGB socket on the motherboard.

7. Step 6: Radiator and Fan Mounting

   Illustration shows mounting the radiator and fans onto the PC case.

Component Identification

• A: CPU Cooler
• B: Intel Backplate
• C: Intel Bracket
• D: AMD Bracket
• E: Thermal Paste
• G1: Screw x4
• G2: AMD Bracket Screw x4
• G3: Intel Screw Stud x4
• G4: 2011 Screw Stud x4
• G5: Case Screws (240/280: x8, 360: x12)