VEVOR CPU Cooler User's Guide

Product Overview

The VEVOR CPU Cooler is designed for efficient heat transfer from the CPU. It features a 240mm radiator and two 120mm PWM fans for optimal cooling performance. The pump includes LED lighting to enhance your PC build's aesthetics (YC-01-SS-001 model). The cooler is compatible with a wide range of Intel and AMD sockets and supports Windows 10 and Windows 11 operating systems.

Key Features:

• 240mm radiator and two 120mm PWM fans for excellent heat transfer.
• LED lighting on the pump (YC-01-SS-001).
• Improved airflow for extreme CPU cooling.
• Compatible with Intel sockets: LGA 115X, 1366, 2011, 1700, 1200.
• Compatible with AMD sockets: AM5, AM4.
• Compatible with Windows 10 and Windows 11.

Parameters

• Models: YC-01-SS-002, YC-01-SS-001
• Input: 12VDC 0.7A
• Cooling Method: Water
• Maximum Rotational Speed: 2200 RPM
• Noise Level: 40 dB

Installation Steps

Please read all instructions carefully before operating.

1. Step 1: Preparation

   Remove the protection film from the CPU cooler base and apply thermal paste.

2. Step 2: Intel LGA 115X/1200/1700 Installation

   Secure the cooler using the Intel backplate (B) and appropriate screws (G1).

3. Step 2.1: Intel LGA 2011 Installation

   Secure the cooler using the Intel bracket (C) and 2011 studs (G4).

4. Step 3: Motherboard Socket Preparation

   Remove the motherboard socket and retain the backplane (for AMD installations).

5. Step 4: AMD Installation

   Secure the cooler to the AMD bracket (D) using the appropriate fasteners (G1, G2).

6. Step 5: Connection

   Connect the display harness to the motherboard USB 2.0 interface. Connect the 3-pin connector from the pump unit to the AIO/PUMP socket. Connect the 4-pin fan PWM connector to the CPU_FAN socket. Connect the fan to the 5V ARGB socket.

7. Step 6: Mounting Fans and Radiator

   Secure the fans and radiator to the computer case using the provided chassis screws (G5).

List of Accessories

• Intel backplane * 1
• Intel bracket * 1
• AMD bracket * 2
• Thermal grease / scraper * 1
• Installation nuts * 4
• AMD bracket screws * 4
• Intel screw rods * 4
• 2011 studs * 4
• Chassis screws: 8 for 240 water cooling, 12 for 360 water cooling

Software Download

Download the necessary drivers and software from the following link:

https://diy-ideas.oss-us-west-1.aliyuncs.com/wp-content/uploads/2024/11/Vevor_CPU_cooler_driver_SKU1.zip

Compliance and Manufacturer Information

Warning: To reduce the risk of injury, user must read instructions manual carefully.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC REP: E-CrossStu GmbH, Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX