VEVOR CPU Cooler User's Guide
Model: YC-01-SS-001
Technical Support and E-Warranty Certificate
www.vevor.com/support
Introduction
VEVOR is committed to providing tools at competitive prices. Phrases like "Save Half" or "Half Price" represent an estimated saving compared to major brands and do not necessarily apply to all product categories. Please verify savings carefully when placing an order.
Product Overview
This document is the user's guide for the VEVOR CPU Cooler, Model YC-01-SS-001. The cooler features a 240mm radiator and two 120mm PWM fans designed for excellent heat transfer from the CPU. It includes customizable LED lighting on the pump to match PC builds and delivers improved airflow for extreme CPU cooling performance.
Visual Description of Product: The product image displays a dual-fan CPU cooler setup. Two 120mm fans, featuring vibrant RGB lighting, are mounted on a 240mm radiator. A central pump unit is visible, connected to the fans and radiator, with a small digital display showing time and system metrics (e.g., CPU temperature, fan speed).
Compatibility
- Compatible with Intel sockets: LGA 115X, 1366, 2011, 1700, 1200.
- Compatible with AMD sockets: AM5, AM4.
- Compatible with operating systems: Windows 10 and Windows 11.
Important Information & Compliance
Warning: To reduce the risk of injury, user must read instructions manual carefully. [⚠️]
FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [FCC logo]
WEEE Directive: This product is subject to the provision of European Directive 2012/19/EC. The symbol of a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such must not be discarded with normal domestic waste but taken to a collection point for recycling electrical and electronic devices. [♻️]
Specifications
Model: YC-01-SS-001
Input: 12VDC 0.7A
Cooling Method: Water
Maximum Rotational Speed: 2200 RPM
Noise Level: ≥33.7dB-A
Installation Steps
Follow these steps carefully for installation.
Step 1: Preparation
Remove the protection film from the cooler base and apply thermal paste to the CPU surface. [Diagram shows hand applying paste to CPU, then placing cooler base.]
Step 2: Intel LGA 115X/1200/1700 Installation
Secure the cooler using the Intel backplate (B), bracket (G1), and screws (G3) onto the motherboard for Intel LGA 115X/1200/1700 sockets. [Diagram shows backplate B, bracket G1, and cooler C being attached to motherboard.]
Step 2.1: Intel LGA 2011 Installation
Secure the cooler using the Intel screw studs (G4) for Intel LGA 2011 sockets. [Diagram shows cooler C being attached with studs G4 to motherboard.]
Step 3: AMD Motherboard Preparation
Remove the motherboard socket retention clips if necessary and retain the original backplane for AMD installations. [Diagram shows AMD bracket setup.]
Step 4: AMD Installation
Secure the cooler using the AMD bracket (D) and appropriate fasteners onto the motherboard for AMD sockets. [Diagram shows AMD bracket D and cooler C being attached.]
Step 5: Wiring Connections
Connect the cooler components to the motherboard:
- Connect the 3-pin connector from the pump unit to the AIO/PUMP socket on the motherboard.
- Connect the 4-pin PWM fan connector to the CPU_FAN socket on the motherboard.
- Connect the fan to the 5V ARGB socket on the motherboard for lighting effects.
- Link the display harness to the motherboard USB 2.0 interface (typically located at the bottom of the motherboard). Refer to the motherboard manual for specific port locations. [Diagram shows pump, fan, and display harness connecting to motherboard headers: AIO/PUMP, CPU FAN, 5V ARGB, USB 2.0.]
Step 6: Radiator and Fan Mounting
Secure the fans (A) and radiator to the PC case. [Diagram shows radiator and fans A being mounted in a PC case.]
List of Accessories
- Intel backplane: 1
- Intel bracket: 1
- AMD bracket: 2
- Thermal grease / scraper: 1
- Installation nuts: 4
- AMD bracket screws: 4
- Intel screw rods: 4
- 2011 studs: 4
- Chassis screws: 8 (for 240 water cooling)
Software Download Link
Download necessary drivers and software from:
Manufacturer and Importer Information
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
European Representative (EC REP): E-CrossStu GmbH, Mainzer Landstr.69, 60329 Frankfurt am Main.
UK Representative (UK REP): YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
Contact Us â Official VEVOR Support
