Tivoli ELITE SB TivoTape: 24V Indoor LED Lighting

ZERO DROP TECHNOLOGY

Brand: Tivoli

Product Type: LED Lighting Tape

Key Features

Low bin tolerance with a 1.5 Step McAdam Elipse standard
Factory produced with Tivoli's eXo Shield coating
High CRI value (90+)
Factory soldered lead wire
IP67 Wet location available
Multiple mounting channel options
Large range of available Kelvin temperatures
Low lead times
4oz. Copper Trace
5 Year warranty

Specifications

Specification	Value
Product Name	24V ELITE SB Indoor
Input Voltage	24V DC
Power Consumption	3.2 W/ft
Maximum Run Length	29' (24' for JA8)
LED Package	2835
LEDs/ft	73
Adhesive	3M VHB Tape
Dimensions (Width)	15/32" (12mm)
Cut Increments	1 5/16"
Operating Temperature	-40°F (-40°C) to +140°F (+60°C)
Lumen Maintenance (L70)	60,000 Hours
Binning Tolerance	1.5 Step MacAdam Elipse
Environment Rating	IP54 Damp Location, Conformal eXo Shield Coated
Warranty	5 years

Output Characteristics (based on 3000K)

Kelvin Temperature	Lumens/ft	Efficacy (Lm/W)
2200K	317	100
4000K	378	117
5000K	381	119

Order Guide

Product Code Structure: TPLE-SB-I-XX-R/MR-24

TPLE: TivoTape ELITE
SB: Standard Brightness
I: Indoor
LED Color: 22 (2200K), 40 (4000K), 50 (5000K)
Length: R (* Full Roll (164 ft)), MR (Maximum Run (29'))
Voltage: 24 (24V DC)

Note: A layout/drawing must accompany each order showing run length and location. Runs with LEAD-C are rounded up to the next cut interval; runs with LEAD-D are rounded down.

Photometrics (Based on 3000K)

Maximum Candela: 118.58

Beam Characteristics:

Distance	Center Beam FC	Beam Width
1.0 FT	104.2 FC	1.0 FT
2.0 FT	22.5 FC	2.0 FT
4.0 FT	5.2 FC	3.0 FT
6.0 FT	2.6 FC	5.0 FT
8.0 FT	1.4 FC	7.0 FT
10.0 FT	0.9 FC	8.0 FT

Power Leads and Jumpers

Factory Installed Options

TPL-I-LEAD-2-C: LEAD/END - 24" standard 2 conductor 18AWG lead wire factory attached to one end of tape.
TPL-I-LEAD-2-D: LEAD/LEAD - 24" standard 2 conductor 18AWG lead wire factory attached to both ends of tape.
TPL-I-XEP-2: EXTRA LEAD WIRE - Additional factory attached 18AWG lead 2 wire to extend lengths of LEAD-C and LEAD-D up to 20 ft. max, sold per foot.
TPL-I-CONN: 18-22AWG BUTT CONNECTORS - Used to interconnect factory attached lead wires, sold individually.

In-Field Connection Options

TPL-I-12-SNP-LEAD-XX: (XX = 12" or 60") 2 conductor 20AWG lead wire field attached, sold 10pcs.
TPL-I-12-SNP-JUMPER-6: 6" 2 conductor 20AWG jumper wire field attached, sold 10pcs.
TPL-I-12-SNP-JOINER: 2 conductor joiner field attached, sold 10pcs.

Compatible Extrusions

The ELITE SB TivoTape is compatible with a variety of aluminum and PVC extrusions designed for mounting and diffusion. Many are available in 6.5' or 8' lengths and accommodate 12mm snap connectors.

MCHAN-8-LP: Low profile, NO LENS OPTION, clear polycarbonate, length 8'.
TPL-I-45-MCH-8-S: White PVC, 45° angle, NO LENS, length 8'.
DWAR-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
EDGE-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
MINI-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
MOFT-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
DYER-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
WRNR-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
NOYS-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
VALN-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
DOME-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
ALTN-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
MRSL-CHAN-SLV-6.5: Anodized aluminum extrusion, 6.5' length.
HRIZ-CHAN-SLV-6.5: Anodized aluminum extrusion, 6.5' length.
ASTR-CHAN-SLV-6.5: Anodized aluminum extrusion, 6.5' length.
INF-X-CHAN-8: PC extrusion (X=Clear or Frosted), available in 8' lengths.
COTA-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
CARU-CHAN-SLV-6.5: Anodized aluminum extrusion, 6.5' lengths.
HAYS-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
DUET-04-CHAN-XXX-6.5: Anodized Aluminum extrusion (XXX=Silver, White, Gold, Black), 6.5' lengths.
DUET-04-CHAN-M-6.5: Mud-In PC fire-proof extrusion, 6.5' Length.
DUET-04-CHAN-SLV-6.5: Anodized aluminum extrusion, 6.5' length.
FRE-CHAN-SLV-6.5: Anodized Aluminum Extrusion, 6.5' lengths.
RIDG-CHAN-SLV-8: Anodized Aluminum Extrusion, length 8'.
TPL-I-45-MCH-8: White PVC 45° extrusion.
INF-X-LNS-8: Polycarbonate lense (X=Clear or Frosted), available in 8' length.
ANZI-CHAN-XXX-6.5: Anodized Aluminum Extrusion (XXX=Silver, Black, White), 6.5' lengths.

In-Wall Controls

Touchscreen controls are available for integrated wall installations:

TVOQ-1-WH: White Touchscreen
TVOQ-10-XX-7: Touchscreen (XX = Black or White)
TVOQ-2-BK: Black Touchscreen

Power Supplies

INFINITY Series (MLV / ELV / 0-10V / PWM / TRIAC)

Description	CAT NO	Application	Primary Voltage	Secondary Voltage	Circuit Breakers	Max Load	Min Load	Circuit Capacity
Infinity Series Class 2 Transformer	INF-J-30-1-1.3-24	Indoor/Outdoor	100-277V AC	24V DC	1	30W	3W	1.3A
Infinity Series Class 2 Transformer	INF-J-60-1-2.5-24	Indoor/Outdoor	100-277V AC	24V DC	1	60W	6W	2.5A
Infinity Series Class 2 Transformer	INF-J-96-1-4-24	Indoor/Outdoor	100-277V AC	24V DC	1	96W	9W	4A
Infinity Series Class 2 Transformer	INF-J-192-2-4-24	Indoor/Outdoor	100-277V AC	24V DC	2	2x96W	2x9W	2x4A
Infinity Series Class 2 Transformer	INF-J-288-3-4-24	Indoor/Outdoor	100-277V AC	24V DC	3	3x96W	3x9W	3x4A

ER Series (Class 2)

Description	CAT NO	Application	Primary Voltage	Secondary Voltage	Circuit Breakers	Max Load	Circuit Capacity
ER Series Class 2	ER-80-1-3.3-24-D	Indoor/Outdoor	100-277V AC 50/60 Hz	24V DC	1	80W	3.3A
ER Series Class 2 0-10V Dimming	ERG-80-24-DIM1-10	Indoor/Outdoor	100-277V AC 50/60 Hz	24V DC	1	80W	3.3A

ADUL/ADNM - NON DIMMING

Description	CAT NO	Application	Primary Voltage	Secondary Voltage	Circuit Breakers	Max Load	Circuit Capacity
ADUL/ADNM Series Class 2 Transformer	ADNM-90-1-4-24-D	Indoor/Outdoor	100-277V AC 50/60 HZ	24V DC	1	90W	3.75A
ADUL/ADNM Series Class 2 Transformer	ADUL-120-1-4-24-D	Indoor	100-277V AC 50/60 HZ	24V DC	1	96W	4A
ADUL/ADNM Series Class 2 Transformer	ADUL-240-2-4-24-D	Indoor	100-277V AC 50/60 HZ	24V DC	2	2x96W	2x4A
ADUL/ADNM Series Class 2 Transformer	ADUL-320-3-4-24-D	Indoor	100-277V AC 50/60 HZ	24V DC	3	3x96W	3x4A

ADUL/ADNM - 0-10V DIMMING

Description	CAT NO	Application	Primary Voltage	Secondary Voltage	Circuit Breakers	Max Load	Circuit Capacity
ADUL/ADNM Series Class 2 Transformer	ADNM-90-1-4-24-DOT	Indoor/Outdoor	100-277V AC 50/60 HZ	24V DC	1	90W	3.75A
ADUL/ADNM Series Class 2 Transformer	ADUL-120-1-4-24-DOT	Indoor	100-277V AC 50/60 HZ	24V DC	1	96W	4A
ADUL/ADNM Series Class 2 Transformer	ADUL-240-2-4-24-DOT	Indoor	100-277V AC 50/60 HZ	24V DC	2	2x96W	2x4A
ADUL/ADNM Series Class 2 Transformer	ADUL-320-3-4-24-DOT	Indoor	100-277V AC 50/60 HZ	24V DC	3	3x96W	3x4A

ADUL/ADNM - DMX SINGLE ADDRESS

Description	CAT NO	Application	Primary Voltage	Secondary Voltage	Circuit Breakers	Max Load	Circuit Capacity
ADUL/ADNM Series Class 2 Transformer	ADNM-90-1-4-24-DIN	Indoor/Outdoor	100-277V AC 50/60 Hz	24V DC	1	90W	3.75A
ADUL/ADNM Series Class 2 Transformer	ADUL-120-1-4-24-DIN	Indoor	100-277V AC 50/60 Hz	24V DC	1	96W	4A
ADUL/ADNM Series Class 2 Transformer	ADUL-240-2-4-24-DIN	Indoor	100-277V AC 50/60 Hz	24V DC	2	2x96W	2x4A
ADUL/ADNM Series Class 2 Transformer	ADUL-320-3-4-24-DIN	Indoor	100-277V AC 50/60 Hz	24V DC	3	3x96W	3x4A

ADUL - DMX MULTI ADDRESS

Description	CAT NO	Application	Primary Voltage	Secondary Voltage	Circuit Breakers	Max Load	Circuit Capacity
ADUL Series Class 2 Transformer	ADUL-240-2-4-24-DIN-2	Indoor	100-277V AC 50/60 Hz	24V DC	2	2x96W	2x4A
ADUL Series Class 2 Transformer	ADUL-320-3-4-24-DIN-3	Indoor	100-277V AC 50/60 Hz	24V DC	3	3x96W	3x4A

ADNM - DMX/DALI FLICKER-FREE FOR TV STUDIO

Description	CAT NO	Application	Primary Voltage	Secondary Voltage	Circuit Breakers	Max Load	Circuit Capacity
ADNM Series Class 2 Transformer	ADNM-120-1-4-24-DTV	Indoor / Outdoor	100-277V AC 50/60 HZ	24V DC	1	1x96W	1x4A
ADNM Series Class 2 Transformer	ADNM-240-2-4-24-DTV	Indoor / Outdoor	100-277V AC 50/60 HZ	24V DC	2	2x96W	2x4A
ADNM Series Class 2 Transformer	ADNM-320-3-4-24-DTV	Indoor / Outdoor	100-277V AC 50/60 HZ	24V DC	3	3x96W	3x4A

Dimmers

DIMMING - 0-10V

Description	CAT NO	Application	Input Voltage	Output Voltage	Max Load
0-10V Dimmer	DIM-LD-010	Indoor	12V/24V DC	12V/24V DC	30 mA max. output (sink only)

DIMMING - MLV

Description	CAT NO	Application	Input Voltage	Output Voltage	Max Load
MLV Dimmer	N-600	Indoor	120V AC	120V AC	450W
MLV Dimmer	N-1000	Indoor	120V AC	120V AC	800W
MLV Dimmer	N-1500	Indoor	120V AC	120V AC	1200W
MLV Dimmer	D-600	Indoor	120V AC	120V AC	450W
MLV Dimmer	M-600	Indoor	120V AC	120V AC	450W
MLV Dimmer	M-1000	Indoor	120V AC	120V AC	800W

DIMMING - ELV

Description	CAT NO	Application	Input Voltage	Output Voltage	Max Load
ELV Dimmer	ME-600	Indoor	120V AC	120V AC	450W
ELV Dimmer	DE-300	Indoor	120V AC	120V AC	300W

	Tivoli ELITE VHO TivoTape™ - Product Specifications and Ordering Guide Detailed specifications, features, ordering information, compatible extrusions, power supplies, and dimmers for Tivoli's ELITE VHO TivoTape™ LED lighting solution. This guide covers product attributes, photometric data, and accessory options for professional lighting installations.
	Tivoli ELITE SB Outdoor LED Tape Light - Zero Drop Technology Detailed specifications for Tivoli's ELITE SB Outdoor LED tape light, featuring Zero Drop Technology, high CRI, IP67 rating, and various compatible extrusions and power supplies.
	Tivoli ELITE HO Outdoor TivoTape: High Output LED Tape Specifications Explore the Tivoli ELITE HO Outdoor TivoTape, a high-performance LED lighting solution featuring Zero Drop Technology, IP67 rating, and exceptional color rendering. This document details specifications, photometrics, TM-30 data, compatible accessories, power supplies, and dimmers for architectural and outdoor lighting applications.
	Tivoli 24V FLOW Indoor LED Lighting: Specifications and Accessories Detailed specifications, order guide, power supplies, and compatible extrusions for the Tivoli 24V FLOW Indoor LED lighting system. Features dim-to-warm capabilities, high efficacy, and various accessories.
	Tivoli Trace Mini COB LED Lighting: Specifications, Ordering Guide, and Accessories Comprehensive guide to Tivoli's Trace Mini COB LED lighting system, detailing key specifications, product code structure, available accessories, power supplies, and dimmers. Features include high CRI, IP67 rating, and a 3-year warranty. Detailed ordering tables for custom lengths are available from the manufacturer.
	Tivoli 24V FUSE RGB Outdoor LED Lighting - Technical Specifications and Accessories Comprehensive technical specifications for Tivoli's 24V FUSE RGB Outdoor LED lighting system. Details include product features, order guide, electrical and physical specifications, compatible extrusions, power supplies, accessories, and control options.
	Tivoli 24V Magic Linear Bar: High-Performance Architectural LED Lighting Discover the Tivoli 24V Magic Linear Bar, a versatile LED fixture designed for architectural facades, bridges, and media displays. It offers low power consumption, efficient power management, standard DMX 512 control, high resolution (3 pixels per foot), Artnet synchronization, ESD protection, and dynamic resolution control. Rated IP67 and 3G vibration resistant.
	Tivoli ELITE HO TivoTape: 24V Indoor LED Tape Light Specifications Comprehensive specifications, features, order guide, compatible extrusions, and power supply details for Tivoli's 24V ELITE HO TivoTape, featuring Zero Drop Technology and high CRI for professional lighting applications.