SKYDANCE WiFi & RF 2CH LED Controller

Features

• Used for control single color or color temperature LED strip.
• DC power socket input and 2 channel constant voltage output.
• Tuya APP cloud control, supports on/off, color temperature and brightness adjustment, delay turn on/off light, timer run, scene edit, and music play function.
• Voice control, supports Amazon ECHO and TmallGenie smart speakers.
• Optional RF 2.4G remote control.
• User must set light type via the MATCH/SET key before Tuya APP network connection and matching with RF remotes of the same light type.
• Each WT1 controller can also function as a WiFi-RF converter, allowing Tuya APP to control one or more RF LED controllers or RF LED dimming drivers synchronously.
• Connect with an external push switch to achieve on/off and 0-100% dimming function.
• Light on/off fade time is selectable (3s).

Technical Parameters

Mechanical Structures and Installations

The controller features clearly labeled connection terminals for power input (+ and -), LED output (+ and -), and a Push Dim terminal. It also includes a MATCH/SET key and an LED indicator. The unit has dimensions of 114.00 mm in length, 38.00 mm in width, and 20.00 mm in depth. Mounting is facilitated by an installation rack.

System Wiring

For Single Color: A power adapter (12-24VDC) connects to the WT1 controller's input. The WT1's output connects to a single-color LED strip. A push switch can be wired to the Push Dim terminal for control.

For Dual Color (CCT): A power supply (12-24VDC constant voltage) is connected to the WT1 controller's input. The WT1's outputs (labeled WW and CW) connect to the corresponding terminals of a dual-color LED strip. A push switch can be connected to the Push Dim terminal.

Overall System Connectivity: The system illustrates connectivity via WiFi. A mobile phone connects to a WiFi router, which communicates with the Tuya Cloud. The WT1 controller connects to the WiFi network. Optional RF remotes (DIM or CCT) can also be used, communicating wirelessly with the WT1, which acts as a WiFi-RF converter. The system supports voice control via platforms like Amazon ECHO.

Tuya APP Interface

The Tuya APP interface for the WT1 controller offers two primary modes: DIM and CCT. In DIM mode, users can adjust brightness using a vertical slider. In CCT mode, users can select color temperature using a color wheel and adjust brightness with a separate slider. The app also provides access to Scene and Music playback functions, as well as Timer and Schedule settings.

Push Dim Functionality

For Single Color:

• Click: ON/OFF
• Double Click: Turn on at 100% or 10% (night light) and vice-versa.
• Long press (>1s) from OFF: Dimming UP.
• Long press (>1s) from ON: Dimming DOWN.

For Dual Color (CCT):

• Click: ON/OFF
• Double Click: Turn on at 100% or 10% (night light) and vice-versa.
• Long press (>1s) from OFF: Color temperature UP/DOWN (turn off and turn on to return dimming).
• Long press (>1s) from ON: Dimming UP/DOWN.

Tuya APP Network Connection

Smart Config: Press and hold the Match/Set key for 2s, or push twice the Match/Set key rapidly. The purple LED indicator flashes fastly, and the output LED will flash 10 times. Clear previous network connection, enter Smart config mode.

AP Config: Press and hold the Match/Set key for 5s. The purple LED indicator flashes slowly. Clear previous network connection, enter AP config mode.

Network Reset: Repeat power on and off for 5 consecutive times. This clears previous network connections and enters Smart config mode, indicated by the output LED flashing 10 times.

Connection Success: If Tuya APP network connection is successful, the RUN LED indicator will stop flashing purple and turn to the corresponding light type color (White for DIM, Yellow for CCT). The device will appear as DIM or CCT in the Tuya APP.

WT1 Match Remote Control (Optional)

End-users can choose suitable match/delete methods. Two options are offered:

Use the WT1's Match key:

• Match: Short press the WT1's Match key, then immediately press the ON/OFF key (single zone remote) or zone key (multiple zone remote) on the remote. The LED indicator flashes fast a few times, indicating a successful match.
• Delete: Press and hold the WT1's Match key for 15s to delete all matches. The LED indicator flashes fast a few times, indicating all matched remotes have been deleted.

Use Power Restart:

• Match: Switch off the WT1's power, then switch it on again. Immediately short press the ON/OFF key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times, indicating a successful match.
• Delete: Switch off the WT1's power, then switch it on again. Immediately short press the ON/OFF key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times, indicating all matched remotes have been deleted.

WT1 as WiFi-RF Converter to Match RF LED Controller or Dimming Driver

End-users can choose suitable match/delete methods. Two options are offered:

Use the controller's Match key:

• Match: Short press the controller's Match key, then immediately press the ON/OFF key on the Tuya APP. The LED indicator flashes fast a few times, indicating a successful match.
• Delete: Press and hold the controller's Match key for 5s. The LED indicator flashes fast a few times, indicating the match has been deleted.

Use Power Restart:

• Match: Switch off the controller's power, then switch it on again. Immediately short press the ON/OFF key 3 times on the Tuya APP. The light blinks 3 times, indicating a successful match.
• Delete: Switch off the controller's power, then switch it on again. Immediately short press the ON/OFF key 5 times on the Tuya APP. The light blinks 5 times, indicating all matched remotes have been deleted.