AeroCool Air Frost Plus RGB FRGB CPU Air Cooler
Model: Air Frost Plus RGB
Type: FRGB CPU Air Cooler
Product Overview
The AeroCool Air Frost Plus RGB is a CPU air cooler designed to provide efficient cooling for your computer's processor while adding customizable RGB lighting to your build. This manual details the installation process for compatible Intel and AMD CPU sockets.
Compatibility
Intel Sockets: LGA 1200, LGA 115X, LGA 775
AMD Sockets: AM4, AM3+, AM3, AM2+, AM2, FM2, FM1
Included Components
- A: CPU Cooler Assembly (Heatsink and Fan)
- B: Thermal Paste Tube
- C: Backplate
- D: Mounting Hardware (Screws, Standoffs, Nuts)
Installation Instructions
Intel Socket Installation
Follow these steps for installing the cooler on Intel motherboards.
Step 1: Prepare Motherboard
Place the backplate (C) behind the motherboard, aligning its holes with the mounting holes around the CPU socket. Insert the appropriate standoffs (part of D) through the motherboard and screw them into the backplate.
Step 2: Attach Mounting Brackets
Position the Intel mounting brackets (A) over the standoffs on the motherboard. Secure the brackets using the provided screws (part of D).
Step 3: Mount the Cooler
Apply a small amount of thermal paste (B) to the center of the CPU. Carefully place the heatsink assembly (A) onto the CPU, aligning it with the mounting brackets.
Step 4: Secure the Cooler
Use the remaining screws (part of D) to fasten the heatsink assembly to the mounting brackets. Tighten them evenly in a cross pattern.
Step 5: Attach Fan
Clip the fan onto the heatsink assembly. Ensure it is securely attached.
Step 6: Connect Cables
Connect the fan cable and RGB cable (if applicable) to the appropriate headers on the motherboard.
AMD Socket Installation
Follow these steps for installing the cooler on AMD motherboards.
Step 1: Prepare Motherboard
Place the backplate (C) behind the motherboard, aligning its holes with the mounting holes around the CPU socket. Insert the appropriate standoffs (part of D) through the motherboard and screw them into the backplate.
Step 2: Mount the Cooler
Apply a small amount of thermal paste (B) to the center of the CPU. Carefully place the heatsink assembly (A) onto the CPU, aligning it with the mounting points.
Step 3: Secure the Cooler
Use the provided screws (part of D) to fasten the heatsink assembly to the standoffs. Tighten them evenly in a cross pattern.
Step 4: Attach Fan and Connect Cables
Clip the fan onto the heatsink assembly. Connect the fan cable and RGB cable (if applicable) to the appropriate headers on the motherboard.
Additional Information
For further support or product information, visit the official AeroCool website at aerocool.io.
