MPOW BH059A Bluetooth Headphones

1. Packages

• [Headphones] x1
• [Audio Cable] x1
• [USB Charging Cable] x1
• [Carrying Pouch] x1
• [User Manual] x1

2. Diagram

The headphones feature the following controls on the earcups:

• Multi-function Button (Center): Controls power, pairing, music playback, and calls.
• Volume Up / Next Track Button (+): Located on the right earcup.
• Volume Down / Previous Track Button (-): Located on the right earcup.

Visual representation: The diagram shows the layout of these buttons on the headphones.

3. Pairing Function

Step 1: Pairing the Headphones

Instructions:

1. With the headphones off, press and hold the multi-function button (?/?) for approximately 4-5 seconds until the indicator lights flash alternately between red and blue.
2. On your smartphone, turn on the Bluetooth function.
3. Search for available Bluetooth devices and select "MPOW-059" from the list.

LED Indicator States:

• ON: 1-2 seconds, solid blue light ?.
• Pairing Mode: 3-4 seconds, flashing red and blue lights ??.
• OFF: 3-4 seconds, solid red light ?.

Step 2: Connecting via Bluetooth

Ensure Bluetooth is enabled on your device. Your device should now be discoverable as "MPOW-059". The connection is typically effective within a 10-meter (33 feet) range.

4. Media Playback and Call Management

Media Control:

• Play/Pause Music: Short press the multi-function button (▶️/⏸️).
• Next Track: Long press the Volume Up / Next Track button (⏭️).
• Previous Track: Long press the Volume Down / Previous Track button (⏮️).

Call Control:

• Make a Call: Initiate calls using your smartphone.
• Answer/End Call: Short press the multi-function button (?).
• Reject Incoming Call: Long press the multi-function button (?) for 2 seconds.
• Activate Voice Assistant: Double click the multi-function button (?️).

5. Clearing Pairing Information

To remove all previously paired Bluetooth devices, press and hold both the Volume Up (+) and Multi-function buttons simultaneously for 5 seconds. The indicator light will flash to confirm.

6. Volume and Music Control

• Increase Volume: Short press the Volume Up / Next Track button (?+).
• Decrease Volume: Short press the Volume Down / Previous Track button (?-).
• Skip to Next Track: Long press the Volume Up / Next Track button (⏭️).
• Skip to Previous Track: Long press the Volume Down / Previous Track button (⏮️).

7. Battery Charging

Connect the headphones to a power source using the provided USB charging cable and a compatible DC 5V adapter. Charging takes less than 4 hours. The indicator light is red ? during charging and turns solid blue ? when fully charged.

8. Safety Notice

• Do not disassemble or modify the headphones for any reason, as this may cause damage.
• Keep the headphones and all accessories out of reach of children and pets.
• Avoid using the device in extreme temperatures (below 0°C or above 45°C).
• Do not expose the device to liquids, as this can cause serious damage.
• Do not operate the device during thunderstorms.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.