MPOW BH441A Wireless Headphones
As a leader in audio products, Mpow is dedicated to innovation in design and technology to create products with simplicity and usability for everyone worldwide. Mpow proudly stands behind every product offered. Mpow has sold over 12,000,000 headphones, favored by 10,000,000 consumers. Every Mpow product comes with a 24-month buyer's assurance.
Package Contents
- Wireless headphones ×1
- 3.5mm audio cable ×1
- User manual ×1
- Charging cable ×1
Diagram
The diagram shows the MPOW BH441A wireless headphones with various buttons and ports labeled. Key components include the power button (often represented by a play/pause symbol), volume up/down buttons, next/previous track buttons, a 3.5mm audio jack input, and a charging port.
Power On / Off
- Power ON: Press and hold the power button (▶II) for 2 seconds. The blue light will turn on and then off, accompanied by a "power on" voice prompt.
- Power OFF: Press and hold the power button (▶II) for 5 seconds. The red light will turn on for 1 second and then off, accompanied by a "power off" voice prompt.
How to Pair
- With your headphones powered off, press and hold the MFB (Multi-Function Button) until the red and blue lights flash alternately. You will hear a "Pairing" voice prompt.
- Enable the Bluetooth feature on your cellphone and search for "MPOW CH6 PLUS" to connect. Once paired, you will hear "Connected". The devices should be within 1 meter (3.3 ft) for initial pairing.
Call Management
- Answer / Hang Up Call: Short press the MFB button.
- Redial Last Number: Double press the MFB button.
- Reject Call: Press and hold the MFB button for 2 seconds.
Volume Control / Music Control
- Volume Up: Short press the '+' button.
- Next Track: Press and hold the '+' button for 2 seconds.
- Volume Down: Short press the '-' button.
- Previous Track: Press and hold the '-' button for 2 seconds.
- Play / Pause Music: Short press the MFB button.
Clear Pairing Record
With your headphones powered on, press and hold the '+' and '-' buttons simultaneously for 5 seconds. The red and blue lights will flash 3 times, and the headphones will re-enter pairing mode.
Charging Indications
- In Charging: The red light stays on.
- Full Charge: The blue light stays on. Charging takes approximately 2 hours.
Bluetooth Indicator Light & Voice Indication
| State | Indicator Light | Voice Indication |
|---|---|---|
| Power on | Blue light stays on for 1s | Power on |
| Power off | Red light stays on for 1s and turns off | Power off |
| Pairing Mode | Red and blue light flashes alternatively | Pairing |
| Bluetooth Connected | Connected | |
| Bluetooth Disconnection | Disconnected | |
| In Charging | Red light stays on; Blue light stays on when fully charged |
FCC Statement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
For support, visit www.xmpow.com or email support@xmpow.com.
Copyright © MPOW Inc. All rights reserved.
