User Manual

Product Description

The YYK-Q10 are wireless earbuds featuring Active Noise Cancelling (ANC) technology.

Left Earbud: L

Right Earbud: R

Product Specifications

• Wireless Version: V5.4
• Talk Time: 6-7 hours
• Music Playing Time: 6-7 hours
• Standby Time: 90 hours
• Communication Distance: ≥10m
• Headset Charging Time: about 1.5 hours
• Headset Battery Capacity: 40mAh
• Charging Chamber Battery Capacity: 300mAh
• Frequency Range: 2.400GHz-2.480GHz
• Supported Agreements: A2DP/AVDTP/AVRCP/RFCOMM/HFP/HSP/SPP/HID

Diagram Description

The earbuds feature a noise-cancelling microphone hole and a voice call microphone. Each earbud has an MFB (Multi-Function Button) key.

Left Earbud Components:

• Noise-cancelling microphone hole
• L-side MFB key
• Voice call microphone

Right Earbud Components:

• Noise-cancelling microphone hole
• R-side MFB key
• Voice call microphone

Power On/Off

1. When the headset is taken out of the charging chamber for the first time, it will turn on automatically.
2. Placing the headset back into the charging chamber will start charging and automatically shut down the headset.
3. When the headset is not in use, placing it back into the charging chamber will automatically turn it off.

How to Pair

Earbuds to Device:

1. Take the earbuds out of the charging chamber to power them on.
2. The earbuds will automatically pair with each other.
3. On your mobile phone/tablet, go to Settings -> Bluetooth.
4. Turn on Bluetooth and search for devices.
5. Select "YYK-Q10" to pair/connect.
6. You can now play music.

Computer/Laptop Pairing:

1. Open Computer Settings -> Devices -> Bluetooth & other devices.
2. Enable Bluetooth.
3. Click "Add Bluetooth or other device".
4. Search for Bluetooth devices and select "YYK-Q10" to pair/connect.
5. You can now play music.

Note: If your computer does not have Bluetooth, please install a Bluetooth adapter and its driver for normal use.

How to Charge the Headset

1. Place the earbuds into the charging compartment. The earbuds will automatically shut down and begin charging.
2. The charging compartment lights indicate that the earbuds are charging.
3. When the earbuds are charging, the indicator light is solid red. The light turns off when charging is complete. The blue light stays on for about 7 seconds and then goes out.

Charge the Charging Chamber

Use a mobile phone adapter to charge the charging chamber. A Type-C cable can be used with a computer or other chargers with a Type-C interface.

Package Contents

• 2 x Bluetooth Headsets
• 1 x Charging Base
• 1 x Type-C Charging Cable
• 1 x Manual

FCC Information

FCC ID: 2AOZMYYK-Q10PRO

FCC Warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to User: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

15.105 Information to the User: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.