YYK-Q16 Ear-Mounted Wireless Headphones

Product Specifications

Wireless Version: V5.3

Talk Time: 7-8 hours

Music Playing: 7-8 hours

Standby Time: 75 hours

Communication Distance: ≥10m

Charging Time of Headset: about 1.5 hours

Headset Battery Capacity: 60mAh

Battery Capacity of Charging Chamber: 500mAh

Frequency Range: 2.40GHz-2.48GHz

Support Agreement: A2DP1.3/HFP1.6 HSP1.2/AVRCP1.6/D11.3

Usage Instructions

Controls

• Pause/Play: Click the MFB key
• Previous: Long press the L-side MFB key for 1 second
• Next: Long press the R-side MFB key for 1 second
• Volume Plus: Double click the L-side MFB key
• Volume Reduction: Double click the R-side MFB key
• Answer Call: Click the MFB key
• Hang Up: Click the MFB key
• Call Rejection: Hold down the MFB key for 1 second
• Cancel Call: Click the MFB key
• Call Siri: Without playing music, hit the left or right MFB key three times
• Cancel Siri: Hit the left or right MFB button three times

Power On/Off

• When the headset is taken out of the charging chamber for the first time, it turns on automatically.
• Place the headset back into the charging chamber to start charging and automatically shut down.
• When the headset is not in use, place it back into the charging chamber to turn it off automatically.

How to Reset

In the disconnected state, double-click and hold for 2 seconds, then power off. Reset is complete.

How to Pair

1. Take the headsets out of the charging chamber to power on.
2. Headsets will pair automatically.
3. On your mobile phone/tablet, go to Settings > Bluetooth. Turn on Bluetooth, search for "YYK-Q16", and pair/connect to play music.

Computer/Laptop Pairing Method

1. Turn on PC settings > Devices > Bluetooth & other devices.
2. Turn on Bluetooth.
3. Add Bluetooth or other devices.
4. Search for Bluetooth device "YYK-Q16", pair/connect, and play music.
5. Note: If your computer does not have Bluetooth, insert a Bluetooth adapter and download the Bluetooth driver before use.

How to Charge the Headset

• Place the headset into the charging compartment. The headset will automatically shut down and start charging. The number in the middle of the display and the corresponding progress bars on the left and right sides will light up, indicating the charging chamber is charging the earphones.
• When the earphone is charging, the orange light is steady. When fully charged, the white light stays on for 10 seconds then turns off.

Charge the Charging Chamber

Use a mobile phone adapter to charge the charging chamber. You can also use a computer Type-C cable or other chargers with a Type-C interface.

Safety Precautions

• Keep away from high temperature, high humidity, and corrosive environments.
• Prevent the product from being hit, dropped, bent, or soaked.
• Do not disassemble the headset or charging stand.
• Avoid overcharging the product to prolong its service life.
• If any discomfort or pain occurs, stop using the product.
• Use a DC 5V-1A adapter certified by a regulated manufacturer.
• Repeated charging and discharging will cause battery performance to decrease over time, which is normal for all rechargeable electronic products.

Package Contents

• 2 x Bluetooth Headsets
• 1 x Charging Base
• 1 x Type-C Charging Cable
• 1 x Manual

FCC Warning

15.19 Labeling requirements: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to user: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

15.105 Information to the user: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.

FCC ID: 2AOZMYYK-Q16