Lowrance Eagle® 4x Quick Start Guide
This document describes the basic controls of the Lowrance® Eagle® 4x multi-function display.
For the latest version of this document and the full operator manual, visit: www.lowrance.com/downloads/eagle.
Note: Refer to the enclosed Installation Manual before you turn on the unit.
Physical control keys
A Pages: Press to cycle the pages.
B Menu: Press once to display application settings.
C Power: Press once to display the System Controls dialog. Press and hold to power the unit ON/OFF. Repeat short presses to cycle the backlight brightness.
D Arrows: Press to navigate menus.
E Enter: Press to confirm a selection in a menu or dialog.
F Zoom: Press to zoom the image.
G Exit: Press to return to the previous menu and to exit a dialog.
System settings
You can access the system settings menu from the bottom of the sonar and flasher settings menus.
Sonar
The sonar application displays an image of the water and seafloor beneath your vessel, allowing you to detect fish and examine the structure of the seafloor.
Use the zoom keys to view different parts of the water column.
By default, your unit is set to Auto mode, and the sonar app settings are automated. Press the menu key to access the sonar settings to customize.
Flasher
The flasher application shows a raw, live sonar view commonly used in scenarios such as ice fishing and vertical jigging.
By default, your unit is set to Auto mode, and the flasher app settings are automated. Press the menu key to access the flasher settings to customize.
System controls
Press the power key once to access the System Controls dialog and:
- Power the unit ON/OFF
- Adjust Brightness
- Turn Night Mode ON/OFF
- Stop/start sonar.