Hover-1 i-100 Electric Hoverboard Operation Manual

Safety First

WARNING! Please read this operation manual thoroughly. Failure to follow the basic instructions and safety precautions can lead to damage to your i-100, other property damage, serious bodily injury, and even death.

Thank you for purchasing the Hover-1 i-100 electric hoverboard. Please read all instructions carefully before using and retain this manual for future reference.

• To avoid collisions, falls, and loss of control, learn how to ride the i-100 safely.
• You can learn how to ride the i-100 by reading this manual and watching videos.
• Hover-1 is not liable for damage or injury caused by failure to understand or follow the warnings and instructions in this manual.

General Safety Precautions

• Only use the supplied charger from Hover-1 with this hoverboard.
• Operating temperature range for the i-100 and charger: 32°F - 104°F (0°C - 40°C).
• Do not ride on icy or slippery surfaces.
• Read the operation manual and warning labels before riding.
• Store the i-100 in a dry, ventilated environment.
• When transporting, avoid violent crashes or impact.

Low Temperature Warning

Low temperatures affect lubrication, increasing internal resistance and decreasing battery capacity. Use caution below 40°F/4°C, as this may increase the risk of mechanical failures, damage, injury, or death.

Safety Instructions

• Keep the i-100 away from heat sources, direct sunlight, humidity, water, and other liquids.
• Do not operate if exposed to water, moisture, or other liquids to prevent electric shock, explosion, or injury.
• Do not use if dropped or damaged.
• Repairs should only be performed by the manufacturer; improper repairs void the warranty and pose risks.
• Do not puncture or harm the exterior surface.
• Keep the i-100 free from dust and lint.
• Use the i-100 only for its intended purpose to avoid damage, injury, or death.
• This product is not a toy; keep out of reach of children.
• Do not expose batteries to excessive heat (direct sunlight, open flame).
• Keep hands, feet, hair, body parts, and clothing away from moving parts, wheels, or drivetrain while the i-100 is running.
• Do not operate or allow others to operate until all instructions, warnings, and safety features are understood.
• Consult a doctor if you have a medical condition that could affect your ability to use the i-100.
• Individuals with head, back, or neck ailments, or prior surgeries to these areas, are not recommended to use the i-100.
• Do not operate if pregnant or have a heart condition.
• Individuals with mental or physical conditions that may impair their ability to understand safety instructions or recognize hazards should not use the i-100.

? NOTE: This symbol indicates instructions or relevant facts the user should understand prior to using the device.

▲ WARNING: This symbol indicates a hazardous situation which, if not avoided, can cause serious injury or death.

Keep your serial number on file for warranty claims and proof of purchase.

▲ WARNING: Prolonged exposure to UV rays, rain, and elements may damage enclosure materials. Store indoors when not in use.

Introduction

The i-100 hoverboard is a personal transporter. Our production processes involve strict testing for each hoverboard. Operating the hoverboard without following this manual may lead to damage or bodily injury.

Package Contents

• Hover-1 i-100 Hoverboard
• Charger & Charging Cable
• Operation Manual

Features/Parts

Diagram showing the hoverboard with numbered callouts pointing to: 1. Fender, 2. Right Foot Mat, 3. Battery Indicator, 4. Running Indicator, 5. Left Foot Mat, 6. Tire, 7. LED Light, 8. Charge Port (located in rear), 9. Power Button (located in rear), 10. Wireless Speaker.

Operating Principals

The i-100 uses digital gyroscopes and acceleration sensors to control balance and motion based on the user's center of gravity. Motors are located within the wheels, and a dynamic stabilization system assists with balance when moving forward and backward, but not while turning.

TIP: To increase stability, shift your weight during turns, especially at higher speeds.

Specifications

Controls and Display

Please read the following instructions carefully.

Turning Your Device On/Off

• Power On: Place your i-100 flat on the ground, press the power button (rear) once. Check the LED indicator (center); it should be lit.
• Power Off: Press the power button once.

Mat Sensors

Four sensors are located under the foot mats. Ensure you are stepping on the foot mats; do not step on any other area. The hoverboard may vibrate or spin if weight is applied to only one foot mat.

Battery Indicator

The display board is in the middle of the i-100.

• Green LED Light: Hoverboard is fully charged.
• Red flashing LED light and beeping: Low battery.
• Yellow flashing LED light: Hoverboard is charging.

Recharge the i-100 when the LED light turns red.

Running Indicator

When the operator triggers the foot mats, the running indicator LED lights up, indicating the hoverboard has entered the running state. If an error occurs, the running LED light will turn red (see "SAFETY ALERTS" on page 18).

Bluetooth® Speaker

The i-100 has a built-in wireless speaker for playing music while riding.

Pairing the Speaker

1. Turn on your hoverboard. The speaker will announce it's waiting for a Bluetooth® connection.
2. Place the hoverboard and Bluetooth® device within operating distance (recommend within 3 feet/1 meter).
3. Ensure Bluetooth® is enabled on your device. Refer to your device's manual for instructions.
4. On your device, select "H1-100" from the list of available Bluetooth® devices.
5. If prompted, enter the PIN code "000000".
6. The speaker will say "paired" when successful.
7. Pairing mode lasts for two minutes. If no devices are paired, it returns to standby.
8. If pairing is unsuccessful, turn off the hoverboard and try again.
9. If your smartphone is out of range or the hoverboard battery is low, the speaker may disconnect. To reconnect, follow pairing steps or recharge the hoverboard.

NOTE: Once paired, the speaker remembers the device and will automatically pair when the device's Bluetooth® is activated within range. You do not need to re-pair previously connected devices.

Your hoverboard can pair with up to two multi-point devices simultaneously.

Listening to Music

Once paired, stream music wirelessly. Select tracks and control volume using your music device. For streaming issues, refer to your device's user manual.

Smartphone App

The i-100 is app-enabled for Apple iOS and Android devices. Download the free Hover-1 Hoverboards app to change LED lighting colors and sync them to music. You can also set riding difficulty (beginner, intermediate, expert) to adjust top speed and sensitivity.

Open your smartphone's camera app and point it at the QR codes below to download the app, or search for "Hover-1 Hoverboards" in your device's app store.

[QR code for iOS app] For iOS

[QR code for Android app] For Android

Before Riding

It is important to understand all functions of your i-100. Incorrect use may result in loss of control.

Practice using the i-100 at slower speeds in a flat, open area until comfortable.

Pre-Ride Checklist

Ensure your i-100 is in proper working order before each ride. If a part malfunctions, contact Customer Support.

▲ WARNING: An i-100 that does not work properly can cause loss of control and falls. Do not ride a damaged i-100; replace damaged parts before riding.

• Ensure the battery is fully charged before riding.
• Wear appropriate safety gear.
• Wear comfortable clothes and flat, closed-toe shoes.

Safety Precautions

Local laws regarding electric transportation devices on public roads vary. Check with local officials to ensure compliance. Hover-1 is not liable for tickets or violations.

• Always wear a helmet that meets CPSC or CE safety standards for protection against serious injury or death.
• Obey all local traffic laws (lights, signs, crosswalks).
• Ride with traffic, not against it.
• Ride defensively and expect the unexpected.
• Give pedestrians the right-of-way.
• Do not ride too close to pedestrians; alert them if passing from behind.
• Slow down at intersections and look both ways before crossing.
• The hoverboard is not equipped with reflectors; avoid low-visibility conditions.

▲ WARNING: In low-visibility conditions (fog, dusk, night), you may be difficult to see, increasing collision risk. Wear bright, reflective clothing.

• Do not ride above your skill level; practice sufficiently.
• Before stepping on, ensure the i-100 is flat on level ground, powered on, and the running indicator is green. Do not step on if the running indicator is red.
• Do not attempt to open or modify the i-100; this voids the warranty and may cause failure, injury, or death.
• Do not use the i-100 in a manner that endangers people or property.
• Maintain a safe distance when riding near others.
• Keep feet on the foot mats at all times. Moving feet off the mats while driving is dangerous and may cause the i-100 to stop or veer sideways.
• Do not operate under the influence of drugs or alcohol.
• Do not operate when restless or sleepy.
• Do not ride off curbs, ramps, or like a skateboard. Do not use in skate parks or empty pools. Misuse voids the warranty and may lead to injury or damage.
• Do not continuously spin in place; this causes dizziness and increases injury risk.
• Do not abuse the i-100; this can damage the unit and cause system failure, leading to injury. Physical abuse, including dropping, voids the warranty.
• Do not operate in or near puddles, mud, sand, stones, gravel, debris, or rough terrain.
• Use on paved, flat, and even surfaces. Lift the i-100 over uneven pavement.
• Do not ride in inclement weather (snow, rain, hail, sleet, icy roads) or extreme heat or cold.
• Bend your knees on bumpy or uneven pavement to absorb shock and vibrations, aiding balance.
• If unsure about terrain safety, step off and carry the i-100. Always err on the side of caution.
• Do not attempt to ride over bumps or objects greater than ½ inch, even with preparation and bent knees.
• Pay attention to your surroundings: road conditions, people, property, and objects.
• Do not operate in crowded areas.
• Use extreme caution indoors, especially around people, property, and in narrow spaces.
• Do not operate while talking, texting, or looking at your phone.
• Do not ride where prohibited.
• Do not ride near motor vehicles or on public roads.
• Do not travel up or down steep hills.
• The i-100 is for single-rider use only; do not operate with two or more people.
• Do not carry anything while riding.
• Individuals with poor balance should not attempt to operate the i-100.
• The i-100 is recommended for riders aged 8 and older.
• At higher speeds, allow for longer stopping distances.
• Do not step forward off the i-100.
• Do not attempt to jump on or off the i-100.
• Do not attempt stunts or tricks.
• Do not ride in dark or poorly lit areas.
• Do not ride off-road, near or over potholes, cracks, or uneven pavement.
• Remember you are 4.5 inches (11.43 cm) taller when operating the i-100; ensure safe passage through doorways.
• Do not turn sharply, especially at high speeds.
• Do not step on the fenders.
• Avoid unsafe places with flammable gas, steam, liquid, dust, or fiber that could cause fire or explosion.
• Do not operate near swimming pools or other bodies of water.

▲ WARNING: When using a hoverboard with a kart attachment (sold separately), it is NOT advisable to ride uphill. Riding on inclines above 5-10° may activate a safety mechanism that automatically shuts down the hoverboard. If this occurs, dismount, place on a flat surface, wait 2 minutes, and power on again.

▲ WARNING: Adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools, or other bodies of water. Always wear shoes and never allow more than one rider at a time.

Riding Your i-100

FAILURE TO FOLLOW SAFETY PRECAUTIONS MAY LEAD TO DAMAGE TO YOUR i-100, PROPERTY DAMAGE, VOIDED WARRANTY, AND SERIOUS BODILY INJURY OR DEATH.

Familiarize yourself with the operating procedures before use.

Operating Your i-100

Ensure the i-100 is fully charged before initial use. Refer to "CHARGING YOUR i-100" on page 21 for instructions.

Stand directly behind your i-100. Place one foot on the corresponding foot mat, keeping weight on the foot still on the ground. If weight is not balanced, the i-100 may move or vibrate, making it difficult to step on evenly. Shift your weight to the foot already on the i-100 and step on with your second foot quickly and evenly.

? NOTES: Stay relaxed and step on quickly, confidently, and evenly. Imagine climbing stairs, one foot, then the other. Look up once your feet are even. The hoverboard may vibrate or spin if weight and pressure are applied to only one foot mat; this is normal.

Find your center of gravity. If weight is distributed correctly and your center of gravity is level, you should be able to stand as if on the ground. It takes approximately 3-5 minutes to get comfortable standing and maintaining balance. Having a spotter can help.

The i-100 is sensitive to motion. Anxiety or hesitation may cause panic and unwanted movement.

To move in your desired direction, focus on that direction. Thinking about the direction shifts your center of gravity, propelling you forward.

Your center of gravity determines direction and speed. Stand straight up to stop. Tilt your center of gravity in the direction you wish to move.

To turn, focus on the desired direction and stay relaxed. Apply pressure on your right foot to turn right, and on your left foot to turn left.

▲ WARNING: To avoid danger, do not turn sharply or at high speeds. Do not turn or ride quickly along slopes, as it may cause injury.

As you become comfortable, maneuvering becomes easier. At higher speeds, shift your weight when turning to maintain stability.

Bend your knees on bumps or uneven surfaces, then dismount and carry the hoverboard to a safe operating surface.

Diagram illustrating movement control: Left image shows tilting forward for 'Move Forward', middle shows upright for 'Stop', right image shows tilting backward for 'Move Backward'.

Dismounting

? NOTES: Stay relaxed and focus on finding your center of gravity to maintain control.

Dismounting can be easy, but incorrect dismounts can cause falls. To dismount from a stopped position: lift your dominant leg, place your foot on the ground behind you (STEP BACK), then step off with your other foot.

Diagram showing the correct dismount procedure: Step 1: Lift dominant leg and place foot behind the hoverboard. Step 2: Step off with the other foot.

▲ WARNING: Lift your feet completely off the foot mats to clear the hoverboard when stepping back to dismount. Failure to do so may send the hoverboard into a tailspin.

Speed and Weight Limitations

Speed and weight limits are set for your safety. Please abide by them.

• Maximum Speed: 7 mph
• Maximum Weight: 220 lbs
• Minimum Weight: 44 lbs

▲ WARNING: Riding the i-100 while exceeding the weight limit may increase the possibility of injury or product damage.

? NOTES: When max speed is reached, the i-100 will beep to alert the user and tilt the rider slowly back to prevent injury.

Operating Range

The i-100 can travel up to 10 miles on a fully charged battery under ideal conditions. Factors affecting range include:

• Terrain: Operating range is highest on smooth, flat surfaces. Uphill or rough terrain significantly reduces range.
• Weight: Lighter users have a higher operating range.
• Ambient Temperature: Ride and store in recommended temperatures for optimal range, battery life, and performance.
• Speed and Riding Style: Moderate, consistent speed maximizes range. High speeds, frequent starts/stops, and idling decrease range.

Balance & Calibration

If your i-100 is unbalanced, vibrating, or not turning properly, calibrate it:

1. Place the i-100 on flat ground. Foot mats should be even, not tilted. Ensure the charger is unplugged and the hoverboard is off.
2. Press and hold the power button for 10-15 seconds. The hoverboard will turn on, and the battery indicator will light up.
3. After the light flashes 5 times consecutively, release the power button. Turn the hoverboard off and then back on. Calibration is complete.

Safety Alerts

If a system error or improper operation occurs, the device will alert the user.

The running indicator light will turn red, and a beep sound will alert you to take precaution and cease operation. The hoverboard may stop suddenly.

Common occurrences producing safety alerts:

• Unsafe riding surfaces (uneven, too steep, etc.).
• Battery voltage is too low.
• The i-100 is still charging.
• During operation, the platform self-tilts due to excess speed.
• The hoverboard is overheating, or the motor temperature is too high.
• The i-100 has been rocking back and forth for over 30 seconds.
• If the system enters protection mode (battery low), the alarm indicator will light up, and the hoverboard will vibrate.
• If the platform tilts forward or backward more than 10 degrees, the i-100 will power off and stop suddenly, potentially causing a loss of balance or fall.
• If tires are blocked, the i-100 will stop after 2 seconds.
• When battery level is depleted below protection mode, the i-100 will power off and stop after 15 seconds.
• If a high discharge current is produced (e.g., driving up a steep slope for a long period), the i-100 will power off and stop after 15 seconds.

▲ WARNING: When the i-100 turns off during a safety alert, all systems halt. Do not attempt to ride. Turn your i-100 off and back on to unlock it from a safety lock.

Charging Your i-100

• Ensure the charging port is clean and dry, with no dust or debris inside.
• Plug the charger into a grounded wall outlet; the charging indicator light on the charger will be green.
• Connect the charging cable to the power supply (100V-240V, 50 Hz/60 Hz).
• Align and connect the 3-pin charging cable into the charging port. DO NOT FORCE THE CHARGER, as this can break the prongs or cause permanent damage.
• Once attached, the charger's indicator light should turn red, indicating charging.
• When the charger's red light turns green, the hoverboard is fully charged. A full charge may take up to 6 hours. A red light is visible during charging.
• If charging while powered on, a yellow flashing light on the hoverboard indicates it is charging.
• After fully charging, unplug the charger from the i-100 and the power outlet.

Battery Care / Maintenance

Battery Specifications

• Battery Type: Rechargeable lithium-ion battery
• Charge Time: Up to 5 hours
• Voltage: 25.2V
• Initial Capacity: 4Ah

Battery Maintenance

• The lithium-ion battery is built-in. Do not disassemble the i-100 to remove or separate the battery.
• Only use the charger and cable supplied by Hover-1. Other chargers/cables may cause damage, overheating, fire risk, and void the warranty.
• Do not connect the i-100 or battery to a power supply plug or car cigarette lighter.
• Do not place the i-100 near fire or in direct sunlight. Heating can break or ignite the battery.
• Do not continue charging if the battery does not recharge within the specified time; this can cause the battery to become hot, rupture, or ignite.
• To preserve resources, recycle or dispose of batteries properly. Lithium-ion batteries may be prohibited from ordinary trash by local laws. Consult your local waste authority for disposal options.
• Do not attempt to modify, change, or replace the battery.

▲ WARNING: Failure to follow these safety precautions could lead to serious bodily injury or death.

• Do not use if the battery emits odor, overheats, or leaks.
• Do not touch leaking materials or breathe emitted fumes.
• Do not allow children or animals to touch the battery.
• The battery contains dangerous substances; do not open or insert anything into it.
• If the battery discharges or emits substances, immediately distance yourself from the battery due to fire or explosion risk.

▲ WARNING: SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY SUBSTANCE EMITTED FROM THE BATTERY.

Care & Maintenance

• To avoid damage to internal circuitry, do not expose the i-100 to liquid, moisture, or humidity.
• Do not use abrasive cleaning solvents.
• Do not expose to extremely high or low temperatures, as this shortens component life, damages the battery, and distorts plastic parts.
• Do not dispose of the i-100 in fire; it may explode or combust.
• Do not let the i-100 contact sharp objects, as this causes scratches and damage.
• Do not allow the i-100 to fall from high places, as this may damage internal circuitry.
• Do not attempt to disassemble the i-100.
• Only use the charger provided by Hover-1.

▲ WARNING: Avoid using water or other liquids for cleaning. If water or other liquids enter the i-100, it will cause permanent damage to internal components.

▲ WARNING: Users who disassemble the i-100 without permission from Hover-1 will void the warranty.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Instructions for a Class B Digital Device or Peripheral

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warranty

For warranty information, please visit www.hover-1.com.

Manufacturer: DGL Group, Ltd.
2045 Lincoln Highway, Edison, NJ 08817

[Space for Serial Number Label]

Connect With Us

• [Facebook icon] @Hover1Rideables
• [Instagram icon] @RideHover1
• [Twitter icon] @RideHover1
• www.Hover-1.com