Hover-1 Dream Electric Hoverboard: Operation Manual & Safety Guide

Safety First: Helmets Save Lives!

Always wear a properly fitted helmet that complies with CPSC or CE safety standards when riding your electric hoverboard.

Helmet Fit Guide

Correct Fit: Make sure your helmet covers your forehead.

Incorrect Fit: Forehead is exposed and vulnerable to serious injury.

Important Warnings and Precautions

WARNING: Please read this operation manual thoroughly. Failure to follow instructions can lead to damage, injury, or death.

Thank you for purchasing the Hover-1 Dream electric hoverboard. Read all instructions carefully before use and retain for future reference.

• Learn to ride the Dream safely to avoid collisions, falls, and loss of control.
• Refer to this manual and any available videos for riding guidance.
• Hover-1 is not liable for damage or injury resulting from failure to understand or follow manual instructions.

Attention Points:

1. Use only the supplied Hover-1 charger.
2. Operating temperature range: 32°F - 104°F (0°C - 40°C).
3. Do not ride on icy or slippery surfaces.
4. Read all manuals and warning labels before riding.
5. Store in a dry, ventilated environment.
6. Avoid violent crashes or impact during transport.

General Safety Instructions

• Keep away from heat sources, direct sunlight, humidity, water, and liquids.
• Do not operate if exposed to water or moisture to prevent electric shock or injury.
• Do not use if dropped or damaged.
• Repairs must be performed by the manufacturer; improper repairs void the warranty and pose risks.
• Do not puncture or harm the exterior.
• Keep free from dust and lint.
• Use only for its intended purpose to avoid damage or injury.
• This product is not a toy; keep out of reach of children.
• Do not expose batteries to excessive heat (sunlight, open flame).
• Keep hands, feet, hair, clothing, and other items away from moving parts while the Dream is running.
• Do not operate until all instructions and safety features are understood.
• Consult a doctor if you have medical conditions that could affect usage.
• Not recommended for individuals with head, back, or neck ailments, or prior surgeries to these areas.
• Do not operate if pregnant or have a heart condition.
• Individuals with physical or mental conditions that impair their ability to follow safety instructions should not use the Dream.

NOTE: Indicates instructions or facts the user should understand.

CAUTION: Indicates a hazardous situation that may cause minor or moderate injury if not avoided.

WARNING: Indicates a hazardous situation that may cause serious injury or death if not avoided.

SERIAL NUMBER: Keep for warranty claims and proof of purchase.

WARNING: Prolonged exposure to UV rays, rain, and elements can damage materials; store indoors.

Introduction

The Dream hoverboard is a personal transporter. Production processes include strict testing. Operating without following manual instructions may lead to damage or injury.

Package Contents:

• Hover-1 Dream Hoverboard
• Charger & Charging Cable
• Operation Manual

Features/Parts:

The hoverboard features:

• 1. Left Fender
• 2. Left Foot Mat
• 3. Battery Indicator
• 4. Right Foot Mat
• 5. Left Tire
• 6. Charge Port
• 7. Power Button
• 8. Protective Chassis Casing
• 9. Running Indicator
• 10. Right Fender
• 11. Right Tire

Diagram Description: A visual representation of the hoverboard with numbered parts corresponding to the list above.

Operating Principals

The Dream uses digital gyroscopes and acceleration sensors for balance and motion control, based on the user's center of gravity. Motors are located within the wheels. A built-in inertia dynamic stabilization system aids balance when moving forward and backward, but not during turns.

TIP: To increase stability during turns, shift weight to counteract centrifugal force, especially at higher speeds.

Specifications

Controls and Display

Turning Your Device On/Off

Power On: Place the Dream flat on the floor and press the power button (located on the rear) once. The battery indicator LED should light up.

Power Off: Press the power button once.

Mat Sensors

Four sensors are located under the foot mats. Ensure you are stepping on the foot mats when riding. Do not step on other areas. The hoverboard may vibrate or spin if weight is applied to only one mat.

Battery Indicator

The display board is in the middle of the Dream.

• Green LED: Hoverboard is fully charged.
• Red flashing LED & Beeping: Low battery.
• Yellow flashing LED: Hoverboard is charging.

Recharge the Dream when the LED light turns red.

Running Indicator

When foot mats are triggered, the running indicator LED lights up, signifying the running state. If an error occurs, the running LED turns red.

Before Riding

It is crucial to understand all functions. Incorrect use can lead to loss of control.

Practice at slower speeds in a flat, open area before riding in public.

Pre-Ride Checklist

Ensure the Dream is in proper working order before each ride. Contact Customer Support if any part malfunctions.

WARNING: A malfunctioning Dream can cause loss of control and falls. Do not ride a damaged Dream; replace damaged parts before riding.

• Ensure the battery is fully charged.
• Wear appropriate safety gear.
• Wear comfortable clothing and flat, closed-toe shoes.

Safety Precautions

Be aware of local laws regarding electric transportation devices. Hover-1 is not liable for tickets or violations.

• Always wear a CPSC or CE-compliant helmet for protection.
• Obey all local traffic laws (lights, signs, crosswalks).
• Ride with traffic, not against it.
• Ride defensively and expect the unexpected.
• Give pedestrians the right-of-way.
• Do not ride too close to pedestrians; alert them before passing.
• Slow down at intersections and look both ways before crossing.
• The hoverboard has no reflectors; avoid low-visibility conditions.

WARNING: In low-visibility conditions (fog, dusk, night), wear bright, reflective clothing as you may be difficult to see, increasing collision risk.

Riding Guidelines

• Do not ride beyond your skill level; practice sufficiently.
• Before stepping on, ensure the Dream is flat on level ground, powered on, and the running indicator is green. Do not step on if the indicator is red.
• Do not attempt to open or modify the Dream; this voids the warranty and can cause failure, injury, or death.
• Do not use the Dream in a manner that endangers people or property.
• Maintain a safe distance when riding near others to avoid collisions.
• Keep feet on foot mats at all times. Moving feet off the Dream while driving is dangerous and can cause it to stop or veer.
• Do not operate under the influence of drugs or alcohol.
• Do not operate when restless or sleepy.
• Do not ride off curbs, ramps, or like a skateboard. Do not use in skate parks or empty pools; misuse voids warranty and may cause injury.
• Do not continuously spin in place; this causes dizziness and increases injury risk.
• Do not abuse the Dream; this can damage the unit and operating system, leading to injury. Physical abuse, including dropping, voids the warranty.
• Do not operate in or near water, mud, sand, stones, gravel, debris, or rough terrain.
• Use on flat, paved surfaces. Lift over uneven pavement.
• Do not ride in inclement weather (snow, rain, hail, sleet, ice) or extreme heat/cold.
• Bend knees on bumpy/uneven surfaces to absorb shock and maintain balance.
• If unsure about terrain safety, step off and carry the Dream. Err on the side of caution.
• Do not ride over bumps or objects greater than ½ inch, even with bent knees.
• Pay attention to your surroundings: road conditions, people, property, objects.
• Do not operate in crowded areas.
• Exercise extreme caution indoors, especially around people, property, and in narrow spaces.
• Do not operate while talking, texting, or using your phone.
• Do not ride where prohibited.
• Do not ride near motor vehicles or on public roads.
• Do not travel up or down steep hills.
• The Dream is for single riders only; DO NOT attempt to ride with two or more people.
• Do not carry anything while riding.
• Individuals with balance issues should not operate the Dream.
• Recommended for riders ages 8 and older.
• At higher speeds, allow for longer stopping distances.
• Do not step forward off the Dream.
• Do not attempt to jump on or off.
• Do not attempt stunts or tricks.
• Do not ride in dark or poorly lit areas.
• Do not ride off-road, near potholes, cracks, or uneven surfaces.
• Remember you are taller (4.5 inches / 11.43 cm) when operating; navigate doorways safely.
• Do not turn sharply, especially at high speeds.
• Do not step on the fenders.
• Avoid unsafe places with flammable gas, steam, liquid, dust, or fiber that could cause fire or explosion.
• Do not operate near swimming pools or other bodies of water.

WARNING: Riding a hoverboard with a kart attachment uphill (above 5-10° incline) is not advisable. A safety mechanism will shut down the hoverboard. Dismount, place on a flat surface, wait 2 minutes, and power on again.

WARNING: Adult supervision is required. Never use near roadways, motor vehicles, steep inclines, steps, swimming pools, or bodies of water. Always wear shoes and allow only one rider.

Riding Your Dream

WARNING: Failure to follow safety precautions can lead to Dream damage, property damage, voided warranty, serious injury, or death.

Familiarize yourself with operating procedures before use.

Operating Your Dream

Ensure the Dream is fully charged before initial use. Refer to "CHARGING YOUR DREAM" on page 19 for instructions.

To mount: Stand behind the Dream. Place one foot on a foot mat, keeping weight on the ground. Shift weight to the mounted foot, then quickly and evenly step on with the second foot.

Diagram Description: Shows two stages of mounting the hoverboard: one foot on, then both feet on.

NOTES: Stay relaxed, step on confidently and evenly. Imagine climbing stairs. Look up once both feet are on. Vibration or spinning with one foot on is normal.

Find your center of gravity. Correct weight distribution allows you to stand as if on the ground. It takes about 3-5 minutes to get comfortable standing.

The Dream is sensitive; anxiety about stepping on can cause panic and unwanted movement. Focus on your desired direction to move. Thinking about the direction shifts your center of gravity, propelling you forward.

Your center of gravity determines movement and speed. Stand straight to stop. Tilt your center of gravity in the direction you wish to move.

To turn: Focus on the direction, stay relaxed. Apply pressure on the right foot to turn right, and on the left foot to turn left.

WARNING: Avoid sharp turns or high speeds, and riding quickly along slopes, as this may cause injury.

As you get comfortable, maneuvering becomes easier. At higher speeds, shift weight during turns for stability.

Bend knees on bumpy/uneven surfaces, then dismount and carry to a safe area.

Diagram Description: Illustrates body posture for moving backward, stopping, and moving forward based on weight distribution.

Dismounting & Limitations

NOTES: Stay relaxed and focus on your center of gravity for control.

Dismounting incorrectly can cause falls. To dismount from a stopped position: lift your dominant leg, place it on the ground behind you (STEP BACK), then step off with the other foot.

Diagram Description: Shows the process of stepping off the hoverboard, stepping back with one foot first.

WARNING: Lift feet completely off the foot mat to clear the hoverboard when stepping back. Failure to do so may cause a tailspin.

Speed and Weight Limitations

• Maximum Speed: 7 mph
• Maximum Weight: 220 lbs
• Minimum Weight: 44 lbs

WARNING: Exceeding the weight limit may increase the risk of injury or product damage.

NOTES: At max speed, the Dream beeps and tilts back to prevent injury.

Operating Range

The Dream can travel up to 6 miles on a full charge under ideal conditions. Factors affecting range include:

• Terrain: Highest range on smooth, flat surfaces. Uphill or rough terrain reduces range.
• Weight: Lighter users have a higher operating range.
• Ambient Temperature: Ride and store in recommended temperatures for optimal range, battery life, and performance.
• Speed and Riding Style: Moderate, consistent speed maximizes range. High speeds, frequent starts/stops, and idling decrease range.

Balance & Calibration

If the Dream is unbalanced, vibrating, or not turning properly, calibrate it:

1. Place the Dream on flat ground. Ensure foot mats are even and not tilted. Charger must be unplugged, and hoverboard turned off.
2. Press and hold the power button for 10-15 seconds until the hoverboard turns on and the battery indicator lights up.
3. Release the power button after the light flashes 5 times consecutively. Turn the hoverboard off and then back on. Calibration is complete.

Safety Alerts

System errors or improper operation trigger alerts (red running indicator light, beep sound). Cease operation. The hoverboard may stop suddenly.

Common alert triggers:

• Unsafe riding surfaces (uneven, too steep).
• Low battery voltage.
• Hoverboard is still charging.
• Platform self-tilts due to excess speed.
• Overheating (hoverboard or motor).
• Hoverboard rocking back and forth for over 30 seconds.
• Protection mode activated (alarm light, vibration) when battery is low.
• Platform tilted forward/backward more than 10 degrees (powers off suddenly, risk of fall).
• Tires blocked (stops after 2 seconds).
• Battery depleted below protection mode (powers off after 15 seconds).
• High discharge current (e.g., steep slope) (powers off after 15 seconds).

WARNING: When the Dream turns off during a safety alert, all systems halt. Do not attempt to ride. Turn off and back on to unlock from safety lock.

Charging Your Dream

Ensure the charging port is clean and dry.

• Plug the charger into a grounded wall outlet (charger indicator light will be green).
• Connect the charging cable to the power supply (100V-240V, 50Hz/60Hz).
• Align and connect the 3-pin charging cable to the Dream's charging port. DO NOT FORCE THE CHARGER; this can break prongs or damage the port.
• Once connected, the charger indicator light should turn red, indicating charging.
• When the charger's red light turns green, the hoverboard is fully charged (may take up to 6 hours). A red light on the hoverboard indicates charging.
• A yellow flashing light on the hoverboard indicates charging when powered on.
• After charging, unplug the charger from the Dream and the power outlet.

Battery Care / Maintenance

Battery Specifications:

• Battery Type: Rechargeable lithium-ion
• Charge Time: Up to 6 hours
• Voltage: 25.2V
• Capacity: 4Ah

Battery Maintenance:

• The lithium-ion battery is built-in. Do not disassemble the Dream to remove or separate the battery.
• Use only the supplied Hover-1 charger and cable. Other chargers may cause damage, overheating, or fire, and void the warranty.
• Do not connect the Dream or battery to a power supply plug or car cigarette lighter.
• Do not place near fire or in direct sunlight; heat can damage or ignite the battery.
• Do not continue charging if it doesn't recharge within the specified time, as this can cause the battery to overheat, rupture, or ignite.
• Recycle or dispose of batteries properly according to local laws.
• Do not attempt to modify, change, or replace the battery.

WARNING: Failure to follow safety precautions can lead to serious injury or death.

• Do not use if the battery emits odor, overheats, or leaks.
• Do not touch leaking materials or inhale fumes.
• Keep children and animals away from the battery.
• The battery contains dangerous substances; do not open or insert anything into it.
• Do not charge if the battery discharges or emits substances; distance yourself immediately in case of fire or explosion.

WARNING: SEEK IMMEDIATE MEDICAL ASSISTANCE IF EXPOSED TO ANY SUBSTANCE EMITTED FROM THE BATTERY.

Care & Maintenance

• To avoid internal circuitry damage, do not expose to liquid, moisture, or humidity.
• Do not use abrasive cleaning solvents.
• Do not expose to extreme temperatures, as this shortens component life, damages the battery, and distorts plastic parts.
• Do not dispose of in fire; it may explode or combust.
• Do not let the Dream contact sharp objects; this causes scratches and damage.
• Do not allow the Dream to fall from high places; this may damage internal circuitry.
• Do not attempt to disassemble the Dream.
• Use only the charger provided by Hover-1.

WARNING: Avoid using water or other liquids for cleaning. If liquids enter the Dream, it will cause permanent damage to internal components.

WARNING: Disassembling the Dream without Hover-1's permission voids the warranty.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) no harmful interference, and (2) acceptance of any received interference.

Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.

FCC Instructions for a Class B Digital Device or Peripheral

This equipment has been tested and found to comply with Class B digital device limits per Part 15 of FCC Rules, designed for reasonable protection against harmful interference in residential installations. It generates, uses, and radiates RF energy. Improper installation/use may cause harmful interference to radio communications. No guarantee of no interference in a particular installation.

If interference occurs (determined by turning off/on), the user is encouraged to correct it by:

• Reorienting or relocating the receiving antenna.
• Increasing separation between equipment and receiver.
• Connecting to a different circuit outlet than the receiver.
• Consulting a dealer or experienced radio/TV technician.

Warranty

For warranty information, visit: www.hover-1.com

Manufacturer: DGL Group, Ltd.

Address: 2045 Lincoln Highway, Edison, NJ 08817

TEL: 732-692-5000

Space for Serial Number Label