KuWFi T-CPE1202S-XXX 4G CPE Router Setup Guide
This guide provides instructions for setting up and configuring your KuWFi 4G CPE Router.
Initial Wi-Fi Connection
To connect to the Wi-Fi network, use the following credentials:
SSID: T-CPE1202S-XXX
Password: 9876543210
To access the router's administrative interface, open your web browser and navigate to:
192.168.2.1
Router Login
Upon accessing the IP address, you will be presented with a login screen.
Enter the default password:
Password: admin
Optionally, check the "Remember Password" box.
WAN Setting
Note: By default, all Ethernet ports are configured as LAN ports. The WAN Ethernet port functionality is enabled when the WAN setting is activated.
WAN Configuration
Enable Wired WAN: [Toggle On/Off]
Work Mode: Router Mode
Connection Type: [Dropdown: DHCP, Static, PPPOE]
DNS Setup: [Dropdown: Auto, Manual]
Mobile Connect Setting
Tip: Ensure the SIM card is inserted or removed only when the device is powered off.
Mobile Connection
Mobile Data: [Toggle On/Off]
Roaming Data: [Toggle On/Off]
Search Settings
Network Operator Selection: [Dropdown: Auto, Manual]
Network Mode: [Dropdown: Auto, 4G, 3G]
APN Setting
APN Settings
Name: [Dropdown: Auto]
APN List
To add a new Access Point Name (APN) configuration, click the "Add" button.
Add APN Configuration
Name: [Text Input]
Authentication Type: [Dropdown: None, PAP, CHAP, PAP/CHAP]
Type: APN
APN: [Text Input]
User Name: [Text Input]
Password: [Text Input]
IP Type: [Dropdown: IPv4]
Wireless Network
Dual frequency: [Toggle On/Off]
Wi-Fi Setting
2.4G Wi-Fi
Enable: [Toggle On/Off]
SSID: T-CPE1202S-9A5E
Encryption: WPA2-PSK
Password: 9876543210
Hide SSID: [Toggle On/Off]
5G Wi-Fi
Enable: [Toggle On/Off]
SSID: T-CPE1202S-9A5E-5G
Encryption: WPA2-PSK
Password: 9876543210
Hide SSID: [Toggle On/Off]
RF Settings
Tip: Updating the wireless configuration may cause currently connected devices to temporarily disconnect.
2.4G RF Settings
2.4G Protocol: n
Bandwidth: [Dropdown: 20/40]
2.4G Channel: Auto (Current 1)
Power: [Slider: Low, Medium, High]
5G RF Settings
5G Protocol: ac
Bandwidth: [Dropdown: 80]
5G Channel: Auto (Current 36)
Power: [Slider: Low, Medium, High]
