Outdoor CPE Router User Manual

1. WiFi Connection

To connect to the device's WiFi network:

1. Choose the correct SSID, typically named "4G-CPE-xxxx", from the available networks and click connect.
2. Enter the WiFi password (e.g., 1234567890) and click connect.

[Visual Description: A screenshot displays a list of available WiFi networks. The "4G-CPE-1023" network is selected, with a "connect" button. The status indicates "Not connected". Another dialog box prompts for a "network security key" (password), showing asterisks for the entered text and an option to "Hide character" ?️.]

2. Backstage Configuration

Log in the WEB management interface

Follow these steps to access the management interface:

1. Ensure your WiFi device or PC is connected to the router.
2. Open a web browser and navigate to the IP address: http://192.168.199.1
3. Enter the username and password. The default credentials are "admin" for both.

[Visual Description: A login screen for the router management interface is shown, with fields for "Username" and "Password". The "Username" field is pre-filled with "admin". A "Login" button is present.]

3. Dial-up Setting

To configure roaming mode:

1. Disconnect ❌ from the current network connection.
2. Navigate to "Network Settings" ? and select "Dial-up Settings" ⚙️.
3. Tick the checkbox ☑️ labeled "Check here, you can connect to Internet the roaming status".
4. Click "Apply" ✔️.

[Visual Description: The "Dial-up Settings" interface shows a "Network Connection" status with a "Disconnect" ❌ button. The "WAN Connection Mode" options are "Automatic" and "Manual". A checkbox is available for roaming status, followed by an "Apply" ✔️ button.]

User Information

4. Network Selection

This section explains how to set up network selection:

To switch between 3G/4G networks, go to "Network Settings" ?, click "Network Selection" ⚙️, choose either "Automatic" or "Manual" mode based on your requirements, and then click "Apply" ✔️.

[Visual Description: The "Network Selection" interface displays radio buttons for "Automatic" and "Manual" modes. The "Automatic" mode includes a dropdown menu for selecting network types like "4G/3G/2G". An "Apply" ✔️ button is visible.]

5. APN Configuration

To set up the Access Point Name (APN):

1. Navigate to "Network Settings" ? and click on "APN" ⚙️.
2. Click the "Add New" ➕ button.
3. Fill in the required fields: "Profile Name", "APN", "mcc", and "mnc".
4. Click "Apply" ✔️.

[Visual Description: The "APN" configuration screen shows current APN settings (e.g., "CTNET") and fields for adding a new profile, including "Profile Name", "APN", "mcc", "mnc", "Authentication", "Connect mode", "User Name", and "Password". An "Add New" ➕ button is present. A separate form illustrates the input for a new APN profile with "Cancel" ? and "Apply" ✔️ buttons.]

6. Basic Settings

Modify wireless network parameters such as network name (SSID), broadcast network name, security mode, and Pass Phrase.

[Visual Description: The "Basic Settings" interface allows modification of "Network Name (SSID)", "Broadcast Network Name (SSID)" (with "Enable" ? / "Disable" ? options), "Security Mode", "Pass Phrase", and "Max Station Number". A status bar indicates network connectivity (e.g., "100% LTE CU"). "Apply" ✔️ and "Cancel" ? buttons are available.]

7. PIN Management

To manage the SIM card PIN:

1. Open "Settings" ⚙️, then navigate to "Device Settings" ? and "PIN Management" ?.
2. Select "Disable" ? for "PIN Status".
3. Click "Apply" ✔️.

Note: If the "PIN Status" is already disabled, this step is not necessary.

[Visual Description: The "PIN Management" interface shows "PIN Status" options: "Enable" ? and "Disable" ?. A "Change PIN" button, "Current PIN" field, and "Attempts Left" counter are displayed. An "Apply" ✔️ button is present.]

8. Router Setting

To change the router's IP address:

1. On the homepage, click "Disconnect" ❌ next to the network connection option.
2. Navigate to "Settings" ⚙️ and select "Router Setting" ?.
3. Modify the IP address and other related settings.
4. Click "Apply" ✔️.

[Visual Description: The "Router Settings" interface displays fields for "IP Address" (e.g., 192.168.199.1), "Subnet Mask", and "DHCP Server" (with "Enable" ? / "Disable" ? options). "Apply" ✔️ and "Cancel" ? buttons are shown.]

Important Notes

• Do not connect the router with a micro USB cable indiscriminately. The micro USB port is solely for firmware upgrades and is not designed for charging. Improper use may damage the router.
• If you encounter any issues or have questions, please contact the manufacturer or support.