KuWFi 4G LTE Wireless Router Configuration Guide
Model: LTE-F204
Wi-Fi Connection Setup
The initial setup screen displays options for connecting to the Wi-Fi network. Key details include:
- SSID: ? LTE-XXXX
- Password: ? 12345678
A button labeled "Connect" is available to initiate the connection.
Router Login
Access the router's web interface by navigating to the following IP address in your browser:
? Login WEB UI Page: 192.168.1.1
Users are prompted to enter credentials:
- Username: ? admin
- Password: ? admin
A "Sign In" button (▶️ Sign In) is provided to log in.
? Router Status Overview
The dashboard provides a comprehensive view of the router's operational status across different categories.
Internet Status
| Parameter | Details |
|---|---|
| ? Cellular Connection |
|
| ? Internet Connection |
|
| ? PDP Information |
|
| ? IP & Network Details |
|
| ⏱️ Connection Time |
|
Router Information
| Parameter | Details |
|---|---|
| ℹ️ Router LAN IP: | 192.168.1.1 |
| ℹ️ IMEI: | 353899262247669 |
| ℹ️ ICCID: | 89860007191607020269 |
| ℹ️ Router Network Mask: | 255.255.255.0 |
| ℹ️ Router MAC: | E8:49:43:0C:F2:04 |
| ℹ️ Run Time: | 0 Day 0 Hour 7 Minutes 24 Seconds |
? Home Network Status
| Parameter | Details |
|---|---|
| ? Connected Devices: | 2 |
| ? Wireless: | ✔️ Enabled |
| ? DHCP Server: | ✔️ Enabled |
? Software Information
| Parameter | Details |
|---|---|
| ? Software Version: | V_EU_5.3.6 |
| ? Hardware Version: | 4G LTE |
? Auto APN List
| Parameter | Details |
|---|---|
| ? MCC: | 460 |
| ? MNC: | 07 |
| ? Operator Name: | CMCC |
| ? APN: | cmnet |
| ? LTE APN: | cmnet |
| ? Network Type: | 0 |
| ?️ 2G/3G Auth Type: | NONE |
| ? 2G/3G User Name: | |
| ? 2G/3G Password: | |
| ?️ 4G Auth Type: | NONE |
| ? 4G User Name: | |
| ? 4G Password: | |
| ? IP Type: | IPv4v6 |
⚙️ APN and Network Settings
This section allows configuration of the device's network connection modes and APN settings.
? Network Mode Selection
Users can select the preferred network mode:
- 4G only
- 4G/3G
- 3G only
? Internet Connection Settings
| Parameter | Details |
|---|---|
| ? Preferred LTE Type | TD-LTE Preferred |
| ? Connection Mode: | ⚙️ Auto |
| ? Auto APN | ⚙️ Auto Configure APN |
| ? PDN1 Settings: | ? Manual APN Settings |
? PDP Settings
| Parameter | Details |
|---|---|
| ? PDP connection name | PDN1 |
| ? 2G/3G APN Name: | (Input field) |
| ? LTE APN Name: | (Input field) |
| ? IP type | IPV4 |
| ✅ Enable QOS | (Checkbox) |
| ?️ 2G/3G Authentication Type | NONE |
| ?️ LTE Authentication Type | NONE |
? Manual Network Scan
This feature allows for manual selection of available networks.
| Parameter | Details |
|---|---|
| ? Selectable Network: | ⚙️ Auto |
| Manual network selection at startup | (Option) |
| ⏱️ LTE background scan time | 5 minutes |
| ? Current Network Mode | Automatic Mode |
? Wi-Fi Setting
Configure wireless network parameters for secure and efficient Wi-Fi connectivity.
⚙️ Wireless Settings
| Parameter | Details |
|---|---|
| ℹ️ Status: | ✔️ Enabled |
| ? 802.11 Mode: | 802.11 ax |
| ? Channel Bandwidth: | Automatic (20/40 MHz) |
| ? Primary Channel: | Automatic |
| ? Secondary Channel | ⬆️ Above |
| ? Band40 ACS Switch | ✔️ Enabled |
| ? Max Clients: | 32 |
| ⏱️ Beacon Period: | 100 |
| ⏱️ DTIM Interval: | 1 |
| ? AP Isolate Switch: | ❌ Close |
?️ Wireless Security Settings
| Parameter | Details |
|---|---|
| ? Network Name (SSID): | LTE-F204 |
| ?️ Network Visibility Status: | ? Visible |
| ?️ Wireless Security: | WPA2-PSK |
| ? Password: | 12345678 |
| ?️ Unmask Password | (Checkbox) |
| ? WPA Cipher: | ? AES (Stronger) |
➡️ Port Forwarding
?️ Custom Port Forwarding Rules
This feature allows users to create custom rules for port forwarding to direct network traffic.
Options include enabling or disabling port forwarding.
A table lists existing rules with columns for Rule Name, IP Address, Port Range, and Protocol. Currently, no entries are found.
A button labeled "Add Rule" (➕ Add Rule) is available.
Example Rule Configuration:
- Rule Name: (Input field)
- IP Address: 192.168.1.1 (Example input)
- Port: (Input field)
- Protocol: TCP (Dropdown selection)
Buttons for "OK" (✔️ OK) and "Cancel" (❌ Cancel) are present.
? Wireless MAC Filters
? MAC Filters Configuration
Configure MAC filtering to control which devices can connect to the wireless network.
Options include enabling or disabling MAC filters and setting the mode to "Allow" (✅ Allow) or "Deny" (❌ Deny).
? Deny List
The "Deny List" displays MAC addresses that are blocked from connecting. Currently, no entries are found.
A button labeled "Add MAC Filter" (➕ Add MAC Filter) is available.
MAC Address Input: A field is provided to enter the MAC address for filtering.
Buttons for "Add" (➕ Add) and "Cancel" (❌ Cancel) are present.
